This volume in the Fundamentals for the Water and Wastewater Main Operator series covers the basics of piping and valves in water and wastewater plants, including details on fittings, strainers, filters, traps and control systems. The book explains how pipes and valves are used to feed materials (e.g., chemicals) into influents and effluents and also siphon off unwanted liquid and gaseous byproduct. Also covered is how pipes are developed into systems and subsystems and coordinated into a plant-wide functioning unit.
A Practical Guide to Piping and Valves for the Oil and Gas Industry covers how to select, test and maintain the right oil and gas valve. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection. Covering both onshore and offshore projects, the book also gives an introduction to the most common types of corrosion in the oil and gas industry, including CO2, H2S, pitting, crevice, and more. A model to evaluate CO2 corrosion rate on carbon steel piping is introduced, along with discussions on bulk piping components, including fittings, gaskets, piping and flanges. Rounding out with chapters devoted to valve preservation to protect against harmful environments and factory acceptance testing, this book gives engineers and managers a much-needed tool to better understand today's valve technology. Presents oil and gas examples and challenges relating to valves, including many illustrations from valves in different stages of projects Helps readers understand valve materials, testing, actuation, packing and preservation, also including a new model to evaluate CO2 corrosion rates on carbon steel piping Presents structured valve selection tables in each chapter to help readers pick the right valve for the right project
Hardbound. Over recent years, a number of significant developments in the application of valves have taken place: the increasing use of actuator devices, the introduction of more valve designs capable of reliable operation in difficult fluid handling situations; low noise technology and most importantly, the increasing attention being paid to product safety and reliability. Digital technology is making an impact on this market with manufacturers developing intelligent (smart) control valves incorporating control functions and interfaces. New metallic materials and coatings available make it possible to improve application ranges and reliability. New and improved polymers, plastic composite materials and ceramics are all playing their part. Fibre-reinforced plastic pipe systems, glass-reinforced epoxy pipe systems and the traditional low-cost polyester pipe systems have all undergone sophisticated design and manufacturing technology changes. The pote
Provides practical information about the design and installation of ductile iron pressure piping systems for water utilities. The 12 chapters outlines the procedure for calculating pipe wall thickness and class, and describes the types of joints, fittings, valves, linings, and corrosion protection a
This book provides a highly illustrated guide to the design, installation and maintenance of hot and cold water supply systems for domestic buildings. Based on British Standard BS 6700, the new edition takes into account revisions to the standard since the book was first published in 1991. It has also been updated to give guidance on the 1999 Water Supply Regulations and includes revisions to the Building Regulations. Written for designers and installers, this immensely practical book will also be of interest to technical staff of water undertakers, property services managers and students of NVQ and BTech courses. It was specially commissioned by the British Standards Institution and written for BSI by Bob Garrett, formerly of Langley College of Further Education and past President of the National Association of Plumbing Teachers.
Pipe designers and drafters provide thousands of piping drawings used in the layout of industrial and other facilities. The layouts must comply with safety codes, government standards, client specifications, budget, and start-up date. Pipe Drafting and Design, Second Edition provides step-by-step instructions to walk pipe designers and drafters and students in Engineering Design Graphics and Engineering Technology through the creation of piping arrangement and isometric drawings using symbols for fittings, flanges, valves, and mechanical equipment. The book is appropriate primarily for pipe design in the petrochemical industry. More than 350 illustrations and photographs provide examples and visual instructions. A unique feature is the systematic arrangement of drawings that begins with the layout of the structural foundations of a facility and continues through to the development of a 3-D model. Advanced chapters discuss the customization of AutoCAD, AutoLISP and details on the use of third-party software to create 3-D models from which elevation, section and isometric drawings are extracted including bills of material. - Covers drafting and design fundamentals to detailed advice on the development of piping drawings using manual and AutoCAD techniques - 3-D model images provide an uncommon opportunity to visualize an entire piping facility - Each chapter includes exercises and questions designed for review and practice
A Comprehensive Guide to Facility Piping Systems Fully up-to-date with the latest codes and standards, this practical resource contains everything you need to plan, select, design, specify, and test piping systems for industry, commercial, and institutional applications. The book includes complete coverage of pipes, fittings, valves, jointing methods, hangers, supports, pumps, tanks, and other required equipment. Facility Piping Systems Handbook, Third Edition, progresses from fundamentals of systems operation to a design procedure that allows quick and accurate component and pipe sizing. Listings of FDA, EPA, and OSHA requirements are included. Complete with formulas, charts, and tables, this invaluable all-in-one volume will save you time and money on the job. Coverage includes: Water treatment and purification Heat transfer, insulation, and freeze protection Cryogenic storage Facility steam and condensate systems Liquid fuel storage and dispensing Fuel gas and compressed gas systems Vacuum air systems Animal facility piping systems Life safety systems Nonpotable and drinking water systems Swimming pools, spas, and water attractions And more
This comprehensive manual of water supply practices explains the design, selection, specification, installation, transportation, and pressure testing of concrete pressure pipes in potable water service.
