PID and Predictive Control of Electrical Drives and Power Converters using MATLAB / Simulink
PID and Predictive Control of Electrical Drives and Power Converters using MATLAB / Simulink

Author: Liuping Wang

Publisher: John Wiley & Sons

Published: 2015-03-02

Total Pages: 369

ISBN-13: 1118339444

DOWNLOAD EBOOK

A timely introduction to current research on PID and predictive control by one of the leading authors on the subject PID and Predictive Control of Electric Drives and Power Supplies using MATLAB/Simulink examines the classical control system strategies, such as PID control, feed-forward control and cascade control, which are widely used in current practice. The authors share their experiences in actual design and implementation of the control systems on laboratory test-beds, taking the reader from the fundamentals through to more sophisticated design and analysis. The book contains sections on closed-loop performance analysis in both frequency domain and time domain, presented to help the designer in selection of controller parameters and validation of the control system. Continuous-time model predictive control systems are designed for the drives and power supplies, and operational constraints are imposed in the design. Discrete-time model predictive control systems are designed based on the discretization of the physical models, which will appeal to readers who are more familiar with sampled-data control system. Soft sensors and observers will be discussed for low cost implementation. Resonant control of the electric drives and power supply will be discussed to deal with the problems of bias in sensors and unbalanced three phase AC currents. Brings together both classical control systems and predictive control systems in a logical style from introductory through to advanced levels Demonstrates how simulation and experimental results are used to support theoretical analysis and the proposed design algorithms MATLAB and Simulink tutorials are given in each chapter to show the readers how to take the theory to applications. Includes MATLAB and Simulink software using xPC Target for teaching purposes A companion website is available Researchers and industrial engineers; and graduate students on electrical engineering courses will find this a valuable resource.

Predictive Control of Power Converters and Electrical Drives
Predictive Control of Power Converters and Electrical Drives

Author: Jose Rodriguez

Publisher: John Wiley & Sons

Published: 2012-04-09

Total Pages: 243

ISBN-13: 1119942640

DOWNLOAD EBOOK

Describes the general principles and current research into Model Predictive Control (MPC); the most up-to-date control method for power converters and drives The book starts with an introduction to the subject before the first chapter on classical control methods for power converters and drives. This covers classical converter control methods and classical electrical drives control methods. The next chapter on Model predictive control first looks at predictive control methods for power converters and drives and presents the basic principles of MPC. It then looks at MPC for power electronics and drives. The third chapter is on predictive control applied to power converters. It discusses: control of a three-phase inverter; control of a neutral point clamped inverter; control of an active front end rectifier, and; control of a matrix converter. In the middle of the book there is Chapter four - Predictive control applied to motor drives. This section analyses predictive torque control of industrial machines and predictive control of permanent magnet synchronous motors. Design and implementation issues of model predictive control is the subject of the final chapter. The following topics are described in detail: cost function selection; weighting factors design; delay compensation; effect of model errors, and prediction of future references. While there are hundreds of books teaching control of electrical energy using pulse width modulation, this will be the very first book published in this new topic. Unique in presenting a completely new theoretic solution to control electric power in a simple way Discusses the application of predictive control in motor drives, with several examples and case studies Matlab is included on a complementary website so the reader can run their own simulations

Model Predictive Control of High Power Converters and Industrial Drives
Model Predictive Control of High Power Converters and Industrial Drives

Author: Tobias Geyer

Publisher: John Wiley & Sons

Published: 2017-02-28

Total Pages: 740

ISBN-13: 111901087X

DOWNLOAD EBOOK

In this original book on model predictive control (MPC) for power electronics, the focus is put on high-power applications with multilevel converters operating at switching frequencies well below 1 kHz, such as medium-voltage drives and modular multi-level converters. Consisting of two main parts, the first offers a detailed review of three-phase power electronics, electrical machines, carrier-based pulse width modulation, optimized pulse patterns, state-of-the art converter control methods and the principle of MPC. The second part is an in-depth treatment of MPC methods that fully exploit the performance potential of high-power converters. These control methods combine the fast control responses of deadbeat control with the optimal steady-state performance of optimized pulse patterns by resolving the antagonism between the two. MPC is expected to evolve into the control method of choice for power electronic systems operating at low pulse numbers with multiple coupled variables and tight operating constraints it. Model Predictive Control of High Power Converters and Industrial Drives will enable to reader to learn how to increase the power capability of the converter, lower the current distortions, reduce the filter size, achieve very fast transient responses and ensure the reliable operation within safe operating area constraints. Targeted at power electronic practitioners working on control-related aspects as well as control engineers, the material is intuitively accessible, and the mathematical formulations are augmented by illustrations, simple examples and a book companion website featuring animations. Readers benefit from a concise and comprehensive treatment of MPC for industrial power electronics, enabling them to understand, implement and advance the field of high-performance MPC schemes.

PID Control System Design and Automatic Tuning using MATLAB/Simulink
PID Control System Design and Automatic Tuning using MATLAB/Simulink

Author: Liuping Wang

Publisher: John Wiley & Sons

Published: 2020-04-20

Total Pages: 366

ISBN-13: 1119469341

DOWNLOAD EBOOK

Covers PID control systems from the very basics to the advanced topics This book covers the design, implementation and automatic tuning of PID control systems with operational constraints. It provides students, researchers, and industrial practitioners with everything they need to know about PID control systems—from classical tuning rules and model-based design to constraints, automatic tuning, cascade control, and gain scheduled control. PID Control System Design and Automatic Tuning using MATLAB/Simulink introduces PID control system structures, sensitivity analysis, PID control design, implementation with constraints, disturbance observer-based PID control, gain scheduled PID control systems, cascade PID control systems, PID control design for complex systems, automatic tuning and applications of PID control to unmanned aerial vehicles. It also presents resonant control systems relevant to many engineering applications. The implementation of PID control and resonant control highlights how to deal with operational constraints. Provides unique coverage of PID Control of unmanned aerial vehicles (UAVs), including mathematical models of multi-rotor UAVs, control strategies of UAVs, and automatic tuning of PID controllers for UAVs Provides detailed descriptions of automatic tuning of PID control systems, including relay feedback control systems, frequency response estimation, Monte-Carlo simulation studies, PID controller design using frequency domain information, and MATLAB/Simulink simulation and implementation programs for automatic tuning Includes 15 MATLAB/Simulink tutorials, in a step-by-step manner, to illustrate the design, simulation, implementation and automatic tuning of PID control systems Assists lecturers, teaching assistants, students, and other readers to learn PID control with constraints and apply the control theory to various areas. Accompanying website includes lecture slides and MATLAB/ Simulink programs PID Control System Design and Automatic Tuning using MATLAB/Simulink is intended for undergraduate electrical, chemical, mechanical, and aerospace engineering students, and will greatly benefit postgraduate students, researchers, and industrial personnel who work with control systems and their applications.

Advanced Control of Electrical Drives and Power Electronic Converters
Advanced Control of Electrical Drives and Power Electronic Converters

Author: Jacek Kabziński

Publisher: Springer

Published: 2016-09-30

Total Pages: 391

ISBN-13: 3319457357

DOWNLOAD EBOOK

This contributed volume is written by key specialists working in multidisciplinary fields in electrical engineering, linking control theory, power electronics, artificial neural networks, embedded controllers and signal processing. The authors of each chapter report the state of the art of the various topics addressed and present results of their own research, laboratory experiments and successful applications. The presented solutions concentrate on three main areas of interest: · motion control in complex electromechanical systems, including sensorless control; · fault diagnosis and fault tolerant control of electric drives; · new control algorithms for power electronics converters. The chapters and the complete book possess strong monograph attributes. Important practical and theoretical problems are deeply and accurately presented on the background of an exhaustive state-of the art review. Many results are completely new and were never published before. Well-known control methods like field oriented control (FOC) or direct torque control (DTC) are referred as a starting point for modifications or are used for comparison. Among numerous control theories used to solve particular problems are: nonlinear control, robust control, adaptive control, Lyapunov techniques, observer design, model predictive control, neural control, sliding mode control, signal filtration and processing, fault diagnosis, and fault tolerant control.

Digital Control of Electrical Drives
Digital Control of Electrical Drives

Author: Slobodan N. Vukosavic

Publisher: Springer Science & Business Media

Published: 2007-08-22

Total Pages: 360

ISBN-13: 0387259856

DOWNLOAD EBOOK

Provides broad insights into problems of coding control algorithms on a DSP platform. - Includes a set of Simulink simulation files (source codes) which permits readers to envisage the effects of control solutions on the overall motion control system. -bridges the gap between control analysis and industrial practice.

Model Predictive Control for Doubly-Fed Induction Generators and Three-Phase Power Converters
Model Predictive Control for Doubly-Fed Induction Generators and Three-Phase Power Converters

Author: Alfeu Sguarezi

Publisher: Elsevier

Published: 2022-01-06

Total Pages: 246

ISBN-13: 0323903231

DOWNLOAD EBOOK

Model Predictive Control for Doubly-Fed Induction Generators and Three-Phase Power Converters describes the application of model predictive control techniques with modulator and finite control sets to squirrel cage induction motor and in doubly-fed induction generators using field orientation control techniques as both current control and direct power control. Sections discuss induction machines, their key modulation techniques, introduce the utility of model predictive control, review core concepts of vector control, direct torque control, and direct power control alongside novel approaches of MPC. Mathematical modeling of cited systems, MPC theory, their applications, MPC design and simulation in MATLAB are also considered in-depth. The work concludes by addressing implementation considerations, including generator operation under voltage sags or distorted voltage and inverters connected to the grid operating under distorted voltage. Experimental results are presented in full. Adopts model predictive control design for optimized induction machines geared for complex grid dynamics Demonstrates how to simulate model predictive control using MATLAB and Simulink Presents information about hardware implementation to obtain experimental results Covers generator operation under voltage sags or distorted voltage

Advanced and Intelligent Control in Power Electronics and Drives
Advanced and Intelligent Control in Power Electronics and Drives

Author: Teresa Orłowska-Kowalska

Publisher: Springer

Published: 2014-01-08

Total Pages: 422

ISBN-13: 3319034014

DOWNLOAD EBOOK

Power electronics and variable frequency drives are continuously developing multidisciplinary fields in electrical engineering and it is practically not possible to write a book covering the entire area by one individual specialist. Especially by taking account the recent fast development in the neighboring fields like control theory, computational intelligence and signal processing, which all strongly influence new solutions in control of power electronics and drives. Therefore, this book is written by individual key specialist working on the area of modern advanced control methods which penetrates current implementation of power converters and drives. Although some of the presented methods are still not adopted by industry, they create new solutions with high further research and application potential. The material of the book is presented in the following three parts: Part I: Advanced Power Electronic Control in Renewable Energy Sources (Chapters 1-4), Part II: Predictive Control of Power Converters and Drives (5-7), Part III: Neurocontrol and Nonlinear Control of Power Converters and Drives (8-11). The book is intended for engineers, researchers and students in the field of power electronics and drives who are interested in the use of advanced control methods and also for specialists from the control theory area who like to explore new area of applications.

Advanced Control of Power Converters
Advanced Control of Power Converters

Author: Hasan Komurcugil

Publisher: John Wiley & Sons

Published: 2023-08-01

Total Pages: 468

ISBN-13: 1119854407

DOWNLOAD EBOOK

Advanced Control of Power Converters Unique resource presenting advanced nonlinear control methods for power converters, plus simulation, controller design, analyses, and case studies Advanced Control of Power Converters equips readers with the latest knowledge of three control methods developed for power converters: nonlinear control methods such as sliding mode control, Lyapunov-function-based control, and model predictive control. Readers will learn about the design of each control method, and simulation case studies and results will be presented and discussed to point out the behavior of each control method in different applications. In this way, readers wishing to learn these control methods can gain insight on how to design and simulate each control method easily. The book is organized into three clear sections: introduction of classical and advanced control methods, design of advanced control methods, and case studies. Each control method is supported by simulation examples along with Simulink models which are provided on a separate website. Contributed to by five highly qualified authors, Advanced Control of Power Converters covers sample topics such as: Mathematical modeling of single- and three-phase grid-connected inverter with LCL filter, three-phase dynamic voltage restorer, design of sliding mode control and switching frequency computation under single- and double-band hysteresis modulations Modeling of single-phase UPS inverter and three-phase rectifier and their Lyapunov-function-based control design for global stability assurance Design of model predictive control for single-phase T-type rectifier, three-phase shunt active power filter, three-phase quasi-Z-source inverter, three-phase rectifier, distributed generation inverters in islanded ac microgrids How to realize the Simulink models in sliding mode control, Lyapunov-function-based control and model predictive control How to build and run a real-time model as well as rapid prototyping of power converter by using OPAL-RT simulator Advanced Control of Power Converters is an ideal resource on the subject for researchers, engineering professionals, and undergraduate/graduate students in electrical engineering and mechatronics; as an advanced level book, and it is expected that readers will have prior knowledge of power converters and control systems.