This immensely practical guide to PIV provides a condensed, yet exhaustive guide to most of the information needed for experiments employing the technique. This second edition has updated chapters on the principles and extra information on microscopic, high-speed and three component measurements as well as a description of advanced evaluation techniques. What’s more, the huge increase in the range of possible applications has been taken into account as the chapter describing these applications of the PIV technique has been expanded.
Particle image velocimetry, or PIV, refers to a class of methods used in experimental fluid mechanics to determine instantaneous fields of the vector velocity by measuring the displacements of numerous fine particles that accurately follow the motion of the fluid. Although the concept of measuring particle displacements is simple in essence, the factors that need to be addressed to design and implement PIV systems that achieve reliable, accurate, and fast measurements and to interpret the results are surprisingly numerous. The aim of this book is to analyze and explain them comprehensively.
Results from several applications of particle image velocimetry (PIV) to unsteady flows at a laboratory scale have been published, and commercial products are now available for more general laboratory use, but for certain industrially important applications, reliable equipment is often available only from in-house research and development teams. This PIV handbookis intended to transfer know-how from PIV development laboratories to end-users in industry and universities. The book discusses the scientific and technical aspects required to set up a PIV system, allows users to assess the problems involved in the application of PIV, and enables them to design, optimize, and use PIV systems to meet their special needs.
This immensely practical guide to PIV provides a condensed, yet exhaustive guide to most of the information needed for experiments employing the technique. This second edition has updated chapters on the principles and extra information on microscopic, high-speed and three component measurements as well as a description of advanced evaluation techniques. What’s more, the huge increase in the range of possible applications has been taken into account as the chapter describing these applications of the PIV technique has been expanded.
This book summarizes the main results reached using the EC-funded network PivNet 2. It also presents a survey of the state of the art of scientific research using PIV techniques. You get a clear introduction to the basics of these techniques. The authors then guide you through current and possible future applications for flow analysis, including combustion and supersonic flow. Hundreds of illustrations, many in full color, are provided.
The aeronautics industry is presently aiming for faster design cycles and shorter time to market of new aircraft. It is looking at the same time for improved aerodynamic performance, for evident competitive reasons. Advanced, computer based design systems, including fast and reliable numerical flow solvers, have been developed in the last decade including new turbulence models. On the experimental side, measurement techniques in general have also been improved significantly, however the data evaluation process remains still very time consuming, and unsteady effects and turbulence are often not being captured with sufficient accuracy and detail. The development of Particle Image Velocimetry (PIV) has helped to improve the analysis of the flow fields. After investigations in laboratory scale wind tunnels, a joint initiative on PIV research, by the European Aerospace Research Establishments, within GARTEUR have enabled a wide breakthrough of this new technology in Europe. Within the Research Framework Program of the European Union, the joint research project EUROPIV aimed to apply PIV technology to problems of industrial interest.
The contents of this volume reflect to a large extent the efforts made by a group of Institutes at the ETH Zürich to develop new techniques for measurements of flows in fluids in the last decade. The motivation came from the study of tr~sport and mixing processes in natural and industrial systems. One of the characteristic properties of turbulence is its high mixing efficiency. The techniques developed are therefore suitable, although not exclusively, for turbulence measurements. They can be subdivided into point-measurements and field-measurements. The aim of the point-measurements developed is to determine the three components of the velocity and all their first derivatives with good temporal resolution and accuracy in turbulent flows. The old and weIl established method of hot-wire anemometry was used for this purpose. One of the main achievements in this context is the construction of miniature multi-wire probes. This technique was introduced to the Institute of Hydromechanics and Water Resources Management of ETH Zürich by Profs. A. Tsinober and E. Kit from Tel-Aviv University. This was made possible by the generous financial support by ETH, for which I would like to express my gratitude on this occasion. In addition, Dr. F.E. Joergensen from DANTEC contributed an example of recent developments in the hardware ofConstant Temperature Anemometry (CTA), for which I am very thankful.
The book begins with an introduction to the general problems of making measurements in high temperature and a presentation of chemically reacting flow systems. It describes each instrument with the various diagnostic techniques and discusses measurements that have been made in furnaces, flames, and rocket engines. The detailed measurement techniques described in this book cover a wide spectrum of applications in combustion systems, including gas turbine, rocket measurement techniques that were developed in laboratories. Information obtained on detailed temperature, velocity, particle size, and gas concentration distribution is leading to improve understanding of the chemical combustion process and to design imporvements in combustors.
This practical reference offers state-of-the-art coverage of speckle metrology and its value as a measuring technique in industry.;Examing every important aspect of the field, Speckle Metrology: surveys the origin of speckle displacement and decorrelation; presents procedures for deformation analysis and shape measurement of rough objects; explains particle image velocimetry (PIV), the processing of PIV records, and the design requirements of PIV equipment; discusses the applications of white light speckle methods and the production of artificial speckles; describes the measurement of surface roughness with laser speckles and polychromatic speckles; illustrates semiautomatic and automatic methods for the analysis of Young's fringes; calculates the variation of Young's fringes with the change in the microrelief of the rough surface; and explicates hololenses for imaging and provides design details with aberration corrections for hololense systems.;With over 1500 literature citations, tables, figures and display equations, Speckle Metrology is a resource for students and professionals in the fields of optical, mechanical, electrical and electronics engineering; applied physics; and stress analysis.
Application of Thermo-Fluidic Measurement Techniques: An Introduction provides essential measurement techniques in heat transfer and aerodynamics. In addition to a brief, but physically elaborate description of the principles of each technique, multiple examples for each technique are included. These examples elaborate all the necessary details of (a) test setups, (b) calibration, (c) data acquisition procedure, and (d) data interpretation, with comments on the limitations of each technique and how to avoid mistakes that are based on the authors’ experience. The authors have different expertise in convection heat transfer and aerodynamics, and have collaborated on various research projects that employ a variety of experimental techniques. Each author has a different view and approach to individual experimental techniques, but these views complement each other, giving new users of each technique a rounded view. With the introduction of this valuable reference book, the reader can quickly learn both the overall and detailed aspects of each experimental technique and then apply them to their own work. Contains both basic principles and fundamental, physical descriptions Provides examples that demonstrate how each experimental technique can be used for industrial testing and academic research in heat transfer and aerodynamics Includes practical and in-depth examples for each technique, with comments on each experimental technique based on the authors’ experiences, including limitations and trial errors with some examples of data interpretation Combines classical techniques in aerodynamics and conduction/convection heat transfer with modern, cutting-edge approaches Collates the information about various pointwise and whole field velocity and thermal measurement techniques in a single resource
