This comprehensive and accessible book, now in its second edition, covers both mathematical and physical aspects of the theory of mechanical vibrations. This edition includes a new chapter on the analysis of nonlinear vibrations. The text examines the models and tools used in studying mechanical vibrations and the techniques employed for the development of solutions from a practical perspective to explain linear and nonlinear vibrations. To enable practical understanding of the subject, numerous solved and unsolved problems involving a wide range of practical situations are incorporated in each chapter. This text is designed for use by the undergraduate and postgraduate students of mechanical engineering.
This book provides readers with a comprehensive treatment of the principles, circuit design techniques, and applications of injection-locking in mixed-mode signal processing, with an emphasis on CMOS implementation. Major topics include: An overview of injection-locking, the principle of injection-locking in harmonic and non-harmonic oscillators, lock range enhancement techniques for harmonic oscillators, lock range enhancement techniques for non-harmonic oscillators, and the emerging applications of injection-locking in mixed-mode signal processing. Provides a single-source reference to the principles, circuit design techniques, and applications of injection-locking in mixed-mode signal processing; Includes a rich collection of design techniques for increasing the lock range of oscillators under injection, along with in-depth examination of the pros and cons of these methods; Enables a broad range of applications, such as passive wireless microsystems, forwarded-clock parallel data links, frequency synthesizers for wireless and wireline communications, and low phase noise phase-locked loops.
Mechanical Vibration: Analysis, Uncertainties, and Control, Fourth Edition addresses the principles and application of vibration theory. Equations for modeling vibrating systems are explained, and MATLAB® is referenced as an analysis tool. The Fourth Edition adds more coverage of damping, new case studies, and development of the control aspects in vibration analysis. A MATLAB appendix has also been added to help students with computational analysis. This work includes example problems and explanatory figures, biographies of renowned contributors, and access to a website providing supplementary resources.
One of the most important features of nonlinear systems with several degrees of freedom is the presence of internal resonances at certain relations between natural frequencies of different modes. This monograph is the first book devoted predominantly to internal resonances in different mechanical systems including those of practical importance.The main purpose is to consider the internal resonances from the general point of view and to elucidate their role in applied nonlinear dynamics by using an efficient approach based on introducing the complex representation of equations of motion (together with the multiple scale method). Considered here are autonomous and nonautonomous discrete two-degree-of-freedom systems, infinite chains of particles, and continuous systems, including circular rings and cylindrical shells. Specific attention is paid to the case of one-to-one internal resonance in systems with cubic nonlinearities. Steady-state and nonstationary regimes of motion, interaction of the internal and external resonances at forced oscillations, and bifurcations of steady-state modes and their stability are systematically studied.
Differential equations are the pre-eminent modelling device of engineering and the applied sciences. This volume contains a refereed subset of papers presented at the 1991 IMACS World Congress. A natural subdivision occurred - General Theory, Specific Differential Equations and Computational Methods. There are eleven papers in the area termed General Theory. Seventeen papers concern Specific Differential Equations - both ordinary and partial - which have been used to model various phenomena. Finally, fourteen papers are devoted to a variety of Computational Methods.
This book is concerned with electrostructural systems, particularly the interaction between the control of the structural and electrical (electronic) components. Structronics is a new emerging area with many potential applications in the design of high-performance structures, adaptive structures, high-precision systems, and micro-systems. As structures are increasingly being controlled by electronics, the problems of structural engineering can be separated less and less from those of electronic engineering and control engineering. This graduate-level book fills a gap in the literature by considering these problems while giving an overview of the current state of analysis, modelling and control for structronic systems. It is a coherent compendium written by leading experts in this new research area and gives readers a sophisticated toolbox that will allow them to tackle the modelling and control of smart structures. The inclusion of an extensive, up-to-date bibliography and index makes this volume an invaluable standard for professional reference.Because of the large number of contributions to the present volume, it has been subdivided into two parts, of which this is Part I. This book will be of interest to engineers, materials scientists, physicists and applied mathematicians.The synergistic integration of active (smart) materials, structures, sensors, actuators, and control electronics has redefined the concept of structures from a conventional passive elastic system to an active (life-like) structronic (structure + electronic) system with inherent self-sensing, diagnosis, and control capabilities. Because of its multi-disciplinary nature, the development of structronic systems has attracted researchers and scientists from many disciplines, such as structures, materials, control, electronics, mathematics, manufacturing, electromechanics, and mechanics. In practical applications, this new structronic system can be used as a component of high-performance machines or structural systems, or be an integrated structure itself performing designated function(s).Most common active (smart) materials, such as piezoelectrics, shape-memory alloys, electro- and magneto-strictive materials, and polyelectrolyte gels have been reviewed in Part I. Application examples are also provided and research issues reported on. While the first part focuses primarily on materials and structures, Part II emphasizes control applications and intelligent systems. With the information provided in this two-volume book, scientists and researchers can easily grasp the state of the art of smart materials and structronic systems, and are ready to pursue their own research and development endeavors.
