This Test Guideline describes a method, which can provide information that is useful in predicting the likely effect of a test substance on gas production in anaerobic digesters. Aliquots of a mixture of anaerobically digesting sludge (20 g/L to 40 ...
This Detailed Review Paper (DRP) is intended to provide the current state-of-the-knowledge in the area of fish screening assays for chemicals active at the endocrine level on the reproductive system of test animals.
This Test Guideline describes a standardised method to examine the transformation of chemicals in pig and cattle liquid manure under anaerobic conditions.
Hazardous pollutants are a growing concern in treatment engineering. In the past, biological treatment was mainly used for the removal of bulk organic matter and the nutrients nitrogen and phosphorous. However, relatively recently the issue of hazardous pollutants, which are present at very low concentrations in wastewaters and waters but are very harmful to both ecosystems and humans, is becoming increasingly important. Today, treatment of hazardous pollutants in the water environment becomes a challenge as the water quality standards become stricter. Hazardous Pollutants in Biological Treatment Systems focuses entirely on hazardous pollutants in biological treatment and gives an elaborate insight into their fate and effects during biological treatment of wastewater and water. Currently, in commercial and industrial products and processes, thousands of chemicals are used that reach water. Many of those chemicals are carcinogens, mutagens, endocrine disruptors and toxicants. Therefore, water containing hazardous pollutants should be treated before discharged to the environment or consumed by humans. This book first addresses the characteristics, occurrence and origin of hazardous organic and inorganic pollutants. Then, it concentrates on the fate and effects of these pollutants in biological wastewater and drinking water treatment units. It also provides details about analysis of hazardous pollutants, experimental methodologies, computational tools used to assist experiments, evaluation of experimental data and examination of microbial ecology by molecular microbiology and genetic tools. Hazardous Pollutants in Biological Treatment Systems is an essential resource to the researcher or the practitioner who is already involved with hazardous pollutants and biological processes or intending to do so. The text will also be useful for professionals working in the field of water and wastewater treatment.
The IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes was created with the aim to produce a generic model and common platform for dynamic simulations of a variety of anaerobic processes. This book presents the outcome of this undertaking and is the result of four years collaborative work by a number of international experts from various fields of anaerobic process technology. The purpose of this approach is to provide a unified basis for anaerobic digestion modelling. It is hoped this will promote increased application of modelling and simulation as a tool for research, design, operation and optimisation of anaerobic processes worldwide. This model was developed on the basis of the extensive but often disparate work in modelling and simulation of anaerobic digestion systems over the last twenty years. In developing ADM1, the Task Group have tried to establish common nomenclature, units and model structure, consistent with existing anaerobic modelling literature and the popular activated sludge models (See Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000, ISBN: 1900222248). As such, it is intended to promote widespread application of simulation from domestic (wastewater and sludge) treatment systems to specialised industrial applications. Outputs from the model include common process variables such gas flow and composition, pH, separate organic acids, and ammonium. The structure has been devised to encourage specific extensions or modifications where required, but still maintain a common platform. During development the model has been successfully tested on a range of systems from full-scale waste sludge digestion to laboratory-scale thermophilic high-rate UASB reactors. The model structure is presented in a readily applicable matrix format for implementation in many available differential equation solvers. It is expected that the model will be available as part of commercial wastewater simulation packages. ADM1 will be a valuable information source for practising engineers working in water treatment (both domestic and industrial) as well as academic researchers and students in Environmental Engineering and Science, Civil and Sanitary Engineering, Biotechnology, and Chemical and Process Engineering departments. Contents Introduction Nomenclature, State Variables and Expressions Biochemical Processes Physicochemical Processes Model Implementation in a Single Stage CSTR Suggested Biochemical Parameter Values, Sensitivity and Estimation Conclusions References Appendix A: Review of Parameters Appendix B: Supplementary Matrix Information Appendix C: Integration with the ASM Appendix D: Estimating Stoichiometric Coefficients for Fermentation Scientific & Technical Report No.13
The awareness and development of 'biodegradable' surfactants pre-dates current pressures by the environmental movement by nearly three decades, wherein a responsible industry mutually agreed to replace 'hard', non-biodegradable com ponents of household detergents by 'soft', biodegradable alternatives, without course to legislation. The only requirement at that time was for surfactants used in detergents to exhibit a 'primary biodegradability' in excess of 80%; this referring to the disap pearance or removal from solution of the intact surface active material as de tected by specified analytical techniques. This proved useful, as observed environmental impacts of surfactants, e.g. visible foam on rivers, are associated with the intact molecule. Test methods for 'primary biodegradability' were eventually enshrined in EU legislation for nonionic surfactants (Directive 821242/EEC, amended 73/404IEEC) and for anionic surfactants (Directive 8212431EEC, amended 73/405IEEC). No approved test methods and resultant legislation have been developed for cationic and amphoteric surfactants to date. The environmental classification of chemical substances, which of course includes surfactants, and associated risk assessment utilises a second criterion 'ready biodegradability'. This may be assessed by a number of methods which monitor oxygen uptake (BOD), carbon dioxide production or removal of dis solved organic carbon (DOC). Some surfactants which comply with the above Detergents Directive are borderline when it comes to 'ready biodegradability'.
This comprehensive book provides an up-to-date and international approach that addresses the Motivations, Technologies and Assessment of the Elimination and Recovery of Phosphorus from Wastewater. This book is part of the Integrated Environmental Technology Series.
The anaerobic process is considered to be a sustainable technology for organic waste treatment mainly due to its lower energy consumption and production of residual solids coupled with the prospect of energy recovery from the biogas generated. However, the anaerobic process cannot be seen as providing the ‘complete’ solution as its treated effluents would typically not meet the desired discharge limits in terms of residual carbon, nutrients and pathogens. This has given impetus to subsequent post treatment in order to meet the environmental legislations and protect the receiving water bodies and environment. This book discusses anaerobic treatment from the perspective of organic wastes and wastewaters (municipal and industrial) followed by various post-treatment options for anaerobic effluent polishing and resource recovery. Coverage will also be from the perspective of future trends and thoughts on anaerobic technologies being able to support meeting the increasingly stringent disposal standards. The resource recovery angle is particularly interesting as this can arguably help achieve the circular economy. It is intended the information can be used to identify appropriate solutions for anaerobic effluent treatment and possible alternative approaches to the commonly applied post-treatment techniques. The succeeding discussion is intended to lead on to identification of opportunities for further research and development. This book can be used as a standard reference book and textbook in universities for Master and Doctoral students. The academic community relevant to the subject, namely faculty, researchers, scientists, and practicing engineers, will find the book both informative and as a useful source of successful case studies.
This Test Guideline describes procedures designed to assess bioaccumulation of chemicals in soil oligochaetes. The parameters which characterise the bioaccumulation of a substance include the bioaccumulation factor (BAF), the uptake rate constant ...
