The wide adoption of wastewater treatment processes and use of novel technologies for improvement of nitrogen and phosphorus removals from wastewater have been introduced to meet stringent discharge standards. Municipal wastewater treatment plants (MWWTPs) are one of major contributors to the increase in the global GHG emissions and therefore it is necessary to carry out intensive studies on quantification, assessment and characterization of GHG emissions in wastewater treatment plants, on the life cycle assessment from GHG emission prospective, and on the GHG mitigation strategies. Greenhouse Gas Emission and Mitigation in Municipal Wastewater Treatment Plants summarizes the recent development in studies of greenhouse gas emissions (N2O, CH4 and CO2) in MWWTPs. It also summarizes the development in life cycle assessment on GHG emissions in consideration of the energy usage in MWWTPs. The strategies in mitigating GHG emissions are discussed and the book provides an overview for researchers, students, water professionals and policy makers on GHG emission and mitigation in MWWTPS and industrial wastewater treatment processes. The book is a valuable resource for undergraduate and postgraduate students in the water, climate, and energy areas of research. It is also a useful reference source for water professionals, government policy makers, and research institutes.
Population growth and increasing industrial development makes the efficient treatment of municipal waste water of vital concern. This book describes the design of various treatment processes which have proved to be most effective, among which are included: skimming tanks with corrugated plates or circular tubes, package treatment units (grit removal - skimming tanks, activated sludge - secondary settling tanks) etc. For each of the processes described, the author gives all the relevant information concerning the design and operation of the equipment. Examples of design calculations are provided, many of them using computer methods. Sketches, diagrams and tables accompany the text and a bibliography and keyword index is provided.The book is addressed to design engineers as well as to the wide range of specialists in fields connected to waste water treatment.
In many countries, especially in developing countries, many people are lacking access to water and sanitation services and this inadequate service is the main cause of diseases in these countries. Application of appropriate wastewater treatment technologies, which are effective, low cost (in investment and especially in operation and maintenance), simple to operate, proven technologies, is a key component in any strategy aimed at increasing the coverage of wastewater treatment. Sustainable Treatment and Reuse of Municipal Wastewater presents the concepts of appropriate technology for wastewater treatment and the issues of strategy and policy for increasing wastewater treatment coverage. The book focuses on the resolution of wastewater treatment and disposal problems in developing countries, however the concepts presented are valid and applicable anywhere and plants based on combined unit processes of appropriate technology can also be used in developed countries and provide to them the benefits described. Sustainable Treatment and Reuse of Municipal Wastewater presents the basic engineering design procedures to obtain high quality effluents by treatment plants based on simple, low cost and easy to operate processes. The main message of the book is the idea of the ability to combine unit processes to create a treatment plant based on a series of appropriate technology processes which jointly can generate any required effluent quality. A plant based on a combination of appropriate technology unit processes is still easy to operate and is usually of lower costs than conventional processes in terms of investment and certainly in operation and maintenance. Chapters in the book are organized in a practical and accessible way to: Demonstrate selected unit process of appropriate technology and provide the scientific basis, the equations and the parameters required to design the unit processes, with some innovations developed by the authors. Highlight design procedures for selected combined processes which are in use in developing countries. Propose an innovative Orderly Design Method (ODM), which is easy to follow by practicing engineers, using the equations and formulas developed, once the fundamentals of each unit and combined process have been established. Provide a numeric example for the basic design of each selected appropriate technology process for a city with a population of 20,000 using the ODM and an Excel program which will be provided to the readers for download from an online web page. This book is a valuable and practical resource for all wastewater treatment engineers in field and the operational managers of waste treatment facilities. Authors: Menahem Libhaber, PhD, Consulting Engineer to the World Bank and other institutions, Alvaro Orozco Jaramillo, MSc, Consulting Engineer to the World Bank, the Inter-American Development Bank, Biwater and other institutions in various countries.
This study guide is a companion to the sixth edition of Operation of Municipal Wastewater Treatment Plants (Manual of Practice No. 11). These two publications serve as the principal training documents for plant managers, superintendents, and operators of municipal wastewater treatment plants as well as college students and consulting engineers. The manual and study guide can be used for training classes, studying for certification exams, and improving the quality of operations within the treatment plant or firm. As with the updated manual, this study guide reflects the state of the art in plant management and operation. The questions emphasize principles of treatment, plant management, troubleshooting, and preventive maintenance. Operating a wastewater treatment facility is challenging and requires continuing education to keep up with those challenges. As such, this study guide contains challenging questions and detailed solutions. A list of symbols and acronyms, conversion factors, and a glossary are also Included in this study guide. These questions can be used to help develop advanced knowledge and ensure that wastewater treatment facilities are fulfilling their mission of environmental protection.
Municipal Wastewater Management in Developing Countries discusses various approaches to municipal wastewater management in order to protect both public health and the environment, with the major focus being on waterborne diseases. Developing countries can be divided into two main categories, i.e. countries in transition with higher growth rates where industrialisation and urbanisation are taking place rapidly, and countries with slower growth rates. It is important, therefore, that approaches should be tailor-made and site-specific. In general, the major trends of water pollution control have significantly contributed to the development of ?conventional sanitation? approaches in terms of legal and financial frameworks, as well as technological enhancement. Despite advances in the science, engineering and legal frameworks, 95 per cent of the wastewater in the world is released into the environment without treatment. Only five per cent of global wastewater is properly treated using the ?standard? sanitation facilities, mainly in developed countries. As a result, the majority of the world?s population is still exposed to waterborne diseases, and the quality of water resources has been rapidly degraded, particularly in poor developing countries. The challenge now is to provide the world?s population, especially the poor, with adequate water and sanitation facilities. Despite billions of dollars of investment spent every year, billions of poor people are still suffering and dying because of poor sanitation. At the beginning of this century, about 1.1 billion people lived without access to clean water (compared to about the same number in 1990), 2.4 billion without appropriate sanitation (compared to 2.3 billion in 1990) and four billion without sound wastewater disposal. The future scenario, that water resources will be further depleted by a growing world population, will be coupled with environmental degradation due to poor pollution control, particularly in most of the developing countries. In order to address the issue of water and wastewater management in developing countries it is necessary to take into consideration the segments of the society itself, particularly the types of housing areas. The segments will indicate the level of socio-economic, mentality and knowledge, which is important for any planned changes in their life style and social engineering. It is also important to segregate the funding framework of any proposed projects. High-income urban communities, for instance, are generally willing to pay for sewerage services and higher water supply tariffs, therefore a designated system can be accordingly provided. Over the past 10 years, serious criticism has been given to the ?conventional sanitation? approach, consequently many definitions, concepts and characteristics have been proposed on ?sustainable sanitation?. Sustainable sanitation is a relevant concept in order to achieve the Millennium Development Goals by 2015 of providing water supply and adequate sanitation for developing countries. Sustainable sanitation is flexible in approach any community ? poor or rich, urban or rural, water-rich or water-poor country ? and requires lower investment costs compared to conventional sanitation approaches. It is also important to note that the framework of sustainable sanitation is much easier to adopt in developing countries where water supply and sanitation infrastructures are still in the developing stages. In some developing countries, no public facilities are available therefore it is an ideal condition to start a new infrastructure with a new framework. This comprehensive reference, prepared by leading international authorities, will provide an invaluable reference for all those concerned with the management of sanitation services in developing countries worldwide.
Special Offer: Cao Ye Shi Author Set - Buy all three books together and save a total £76! Mass Flow and Energy Efficiency of Municipal Wastewater Treatment Plants presents the results of a series of studies that examined the mass flow and balance, and energy efficiency, of municipal wastewater treatment plants; it offers a vision of the future for municipal wastewater treatment plants. These studies were undertaken as part of the R & D program of the Public Utilities Board (PUB), Singapore. The book covers the latest practical and academic developments and provides: a detailed picture of the mass flow and transfer of Chemical Oxygen Demand (COD), solids, nitrogen and phosphorus and energy efficiency in a large municipal wastewater treatment plants in Singapore. The results are compared with the Strass wastewater treatment plant, Austria, which reaches energy self-sufficiency, and the approaches for improvement are proposed. a description of the biological conversions and mass flow and energy recovery in an up-flow anaerobic sludge blanket reactor - activated sludge process (UASB-ASP) - and compares this to the conventional activated sludge process. a comprehensive and critical review of the current state of the art of energy efficiency of municipal wastewater treatment plants including benchmarks, best available technologies and practices in energy saving and recovery, institution policies, and road maps to high energy recovery and high efficiency plants. a vision of future wastewater treatment plants including the major challenges of the paradigm shift from waste removal to resource recovery, technologies and processes to be studied, integrated sanitation system and management and policies. Mass Flow and Energy Efficiency of Municipal Wastewater Treatment Plants is a valuable reference on energy and sustainable management of municipal wastewater treatment plants, and will be especially useful for process and design researchers in wastewater research institutions, engineers, consultants and managers in water companies and water utilities, as well as students and academic staff in civil/sanitation/environment departments in universities.
This book reviews the practice of reclaiming treated municipal wastewater for agricultural irrigation and using sewage sludge as a soil amendment and fertilizer in the United States. It describes and evaluates treatment technologies and practices; effects on soils, crop production, and ground water; public health concerns from pathogens and toxic chemicals; existing regulations and guidelines; and some of the economic, liability, and institutional issues. The recommendations and findings are aimed at authorities at the federal, state, and local levels, public utilities, and the food processing industry.
Both practical and theoretical, this book provides the basic principles of soil chemistry, hydrology, wetland ecology, microbiology, vegetation and wildlife as a sound introduction to this innovative technology to treat toxic wastewaters and sludges. The use of wetlands for acid mine drainage, and metals removal in municipal, urban runoff, and industrial systems is discussed. Case histories are also presented, demonstrating specific types of constructed wetlands and applications to municipal wastewater, home sites, coal and non-coal mining, coal-fired electric power plants, chemical and pulp industry, agriculture, landfill leachate, and urban stormwater. Construction and management guidelines are clearly explained, providing information on applicable policies and regulations, siting and construction, and operations and monitoring of constructed wetlands treatment systems. Recent theoretical and empirical results from operating systems and research facilities, including such new applications as nutrient removal from eutrophic lakes and urban stormwater treatment within highway rights-of-way, are included. This book is an ideal resource for wastewater treatment plants, consulting engineers, federal and state regulators, industrial environmental managers, municipalities, environmental health professionals, and ecologists.
