The latest state of simulation techniques to model plasticity and fracture in crystalline materials on the nano- and microscale is presented. Discrete dislocation mechanics and the neighbouring fields molecular dynamics and crystal plasticity are central parts. The physical phenomena, the theoretical basics, their mathematical description and the simulation techniques are introduced and important problems from the formation of dislocation structures to fatigue and fracture from the nano- to microscale as well as it’s impact on the macro behaviour are considered.
Metals are of great importance for structural applications due to their high yield strength and fracture toughness. In recent years, efforts have been undertaken to further improve these properties, accelerated by advances in materials research and manufacturing processes. The conventional strategy to achieve high strength is to reduce the average grain size, but this is inevitably followed by the loss of ductility. Deformation mechanisms for plastic flow and ductility are largely dependent on microscopic defects such as dislocations, grain boundaries (GBs), and triple junctions (TJs). It is necessary to obtain a fundamental understanding of the correlation between defect mechanics and macroscopic properties across a variety of time and length scales so as to overcome the strength-ductility trade-off. With this motivation, a computational and theoretical approach has been taken to investigate the complex interplay between defects and macroscopic material response. In the first part of this dissertation (Chapters 2-3), dislocation mechanics within single crystals are examined to understand the role of sample size, crystallographic orientation, and loading conditions on the mechanism response. The focus is drawn to the plastic deformation which occurs at the mesoscale, wherefrom material properties are determined. Chapter 2 reports on DD simulations conducted to examine plastic deformation in single crystalline Cu micropillars subjected to two types of combined loading conditions: tension after torsion and torsion after tension. These combined loadings are then compared with simple tension and pure torsion, respectively. In metallic materials, the activation of one slip system increases the flow strength of other slip systems, which is a phenomenon known as latent hardening. This latent hardening behavior has been understood by the “forest hardening” mechanism arising from mutual dislocation interactions at the continuum length scale. As the size of a sample decreases to the submicron scale, the interactions between dislocations become increasingly sparse, so plastic deformation is instead governed mainly by dislocation sources. We find that there exists a transition from latent hardening to latent softening in intermediately-sized 600 nm samples undergoing the combined tension after torsion loading. The systematic computational and theoretical model described here suggests explosive multiplication causes dislocation density to greatly increase, giving rise to latent softening in those micropillars under tension after torsion. At the continuum length scale, mechanical properties of metals show relatively weak orientation dependence; however, Chapter 3 shows how strong anisotropic behaviors are exhibited as the size of sample decreases to micron and nanometer length scales. DD simulations are performed to investigate the orientation-dependent plasticity in submicron face-centered cubic (FCC) micropillars subjected to torsion. Accommodating results from atomistic modeling, updated surface nucleation schemes in DD models have been developed for three orientations ([001], [101], and [111]), allowing investigation of the dislocation microstructure evolution and the corresponding anisotropic mechanical response upon torsional loading and unloading. The DD simulation results show that the coaxial and hexagonal dislocation networks formed in [101]- and [111]-oriented nanopillars, respectively, exhibited excellent plastic recovery, while the rectangular dislocation network formed in the [001] crystal orientation was more stable and did not experience as much plastic recovery. Following work on isolated dislocation mechanics within a single crystal, the second part of this dissertation, Chapter 4, transitions into the exploration of defect mechanisms within bicrystals. Mechanical properties of metals such as strength and toughness are strongly correlated to complex interactions between various defects in the crystalline structure. While elementary interactions between these defects have been investigated using recent micro- and nano-characterization techniques, understanding of the detailed interaction mechanisms has hardly been obtained. To model plasticity in polycrystals at larger time and length scales, it is necessary to formulate a general guideline to predict both the interaction type (transmission or reflection) and the dislocation’s subsequent slip system after the interaction. Many criteria based on the geometric alignment of the defects have been developed to predict this phenomenon, but these have not been found to be accurate when applied to general data sets of grain boundaries (GBs). With this motivation, we conduct a systematic study using molecular dynamics (MD) models of bicrystals to analyze defect interaction process between a prismatic dislocation loop and eleven different grain boundaries of the following character: three tilt, three twist, and five mixed. Based on the MD observations, two new prediction methods are developed: the first is a new data-driven parametric score function based on the classical geometric criteria, and the second is by applying Gaussian process machine learning methods to find the probability distribution of a hidden function. The proposed methods could pave a new way to predict the unit interaction of dislocation with various GBs, which could show much higher accuracy compared to pre-existing geometric criteria. Finally, additional work on paving the way to polycrystalline modeling at the mesoscale is detailed, followed by an overall summary in Chapter 5.
A profusion of research and results on the mechanical behaviour of crystalline solids has followed the discovery of dislocations in the early thirties. This trend has been enhanced by the development of powerful experimental techniques. particularly X ray diffraction. transmission and scanning electron microscopy. microanalysis. The technological advancement has given rise to the study of various and complex materials. not to speak of those recently invented. whose mechanical properties need to be mastered. either for their lise as structural materials. or more simply for detenllining their fonnability processes. As is often the case this fast growth has been diverted both by the burial of early fundamental results which are rediscovered more or less accurately. and by the too fast publication of inaccurate results. which propagate widely. and are accepted without criticism. Examples of these statements abound. and will not be quoted here for the sake of dispassionateness. Understanding the mechanical properties of materials implies the use of various experimental techniques. combined with a good theoretical knowledge of elasticity. thermodynamics and solid state physics. The recent development of various computer techniques (simulation. ab initio calculations) has added to the difficulty of gathering the experimental information. and mastering the theoretical understanding. No laboratory is equipped with all the possible experimental settings. almost no scientist masters all this theoretical kno\vledge. Therefore. cooperation between scientists is needed more than even before.
The objective of this research is to investigate the plastic deformation and its controlling mechanisms in order to model and predict the material microstructure either dislocation pileups as a feature of plasticity or spatio-temporal dislocations pattern as another feature of plastic deformation using a hierarchical multiscale modeling approach from discrete dislocation dynamic to continuum dislocation dynamics and continuum mechanics.
Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
This book presents current spatial and temporal multiscaling approaches of materials modeling. Recent results demonstrate the deduction of macroscopic properties at the device and component level by simulating structures and materials sequentially on atomic, micro- and mesostructural scales. The book covers precipitation strengthening and fracture processes in metallic alloys, materials that exhibit ferroelectric and magnetoelectric properties as well as biological, metal-ceramic and polymer composites. The progress which has been achieved documents the current state of art in multiscale materials modelling (MMM) on the route to full multi-scaling. Contents: Part I: Multi-time-scale and multi-length-scale simulations of precipitation and strengthening effects Linking nanoscale and macroscale Multiscale simulations on the coarsening of Cu-rich precipitates in α-Fe using kinetic Monte Carlo, Molecular Dynamics, and Phase-Field simulations Multiscale modeling predictions of age hardening curves in Al-Cu alloys Kinetic Monte Carlo modeling of shear-coupled motion of grain boundaries Product Properties of a two-phase magneto-electric composite Part II: Multiscale simulations of plastic deformation and fracture Niobium/alumina bicrystal interface fracture Atomistically informed crystal plasticity model for body-centred cubic iron FE2AT ・ finite element informed atomistic simulations Multiscale fatigue crack growth modeling for welded stiffened panels Molecular dynamics study on low temperature brittleness in tungsten single crystals Multi scale cellular automata and finite element based model for cold deformation and annealing of a ferritic-pearlitic microstructure Multiscale simulation of the mechanical behavior of nanoparticle-modified polyamide composites Part III: Multiscale simulations of biological and bio-inspired materials, bio-sensors and composites Multiscale Modeling of Nano-Biosensors Finite strain compressive behaviour of CNT/epoxy nanocomposites Peptide・zinc oxide interaction
This unique book provides a concise and systematic treatment of foundational material on dislocations and metallurgy and an up-to-date discussion of multiscale modeling of materials, which ultimately leads to the field theory of multiscale plasticity (FTMP). Unlike conventional continuum models, this approach addresses the evolving inhomogeneities induced by deformation, typically as dislocation substructures like dislocation cells, as well as their interplay at more than one scale. This is an impressively visual text with many and varied examples and viewgraphs. In particular, the book presents a feasible constitutive model applicable to crystal plasticity-based finite element method (FEM) simulations. It will be an invaluable resource, accessible to undergraduate and graduate students as well as researchers in mechanical engineering, solid mechanics, applied physics, mathematics, materials science, and technology.
In the past twenty years, new experimental approaches, improved models and progress in simulation techniques brought new insights into long-standing issues concerning dislocation-based plasticity in crystalline materials. Dislocation dynamics simulations are becoming accessible to a wide range of users. This book presents to students and researchers in materials science and mechanical engineering a comprehensive coverage of the physical body of knowledge on whichthey are based. This includes classical studies, which are too often ignored, recent experimental and theoretical advances, as well as a discussion of selected applications on various topics.
The dislocation is the basic building block of the crack in an elastic-plastic solid. Fracture mechanics is developed in this text from its dislocation foundation. It is the only text to do so. It is written for the graduate student and the new investigator entering the fracture field as well as the experienced scientist who has not used the dislocation approach. The dislocation mechanics needed to find the dislocation density fields of crack tip plastic zones is developed in detail. All known dislocation based solutions are given for the three types of cracks in elastic-plastic solids are given.
The book helps to answer the following questions: How far have the understanding and mesoscale modeling advanced in recent decades, what are the key open questions that require further research and what are the mathematical and physical requirements for a mesoscale model intended to provide either insight or a predictive engineering tool? It is addressed to young researchers including doctoral students, postdocs and early career faculty,
