A comprehensive introduction to all facets of MPLS theory and practice Helps networking professionals choose the suitable MPLS application and design for their network Provides MPLS theory and relates to basic IOS configuration examples The Fundamentals Series from Cisco Press launches the basis to readers for understanding the purpose, application, and management of technologies MPLS has emerged as the new networking layer for service providers throughout the world. For many service providers and enterprises MPLS is a way of delivering new applications on their IP networks, while consolidating data and voice networks. MPLS has grown to be the new default network layer for service providers and is finding its way into enterprise networks as well. This book focuses on the building blocks of MPLS (architecture, forwarding packets, LDP, MPLS and QoS, CEF, etc.). This book also reviews the different MPLS applications (MPLS VPN, MPLS Traffic Engineering, Carrying IPv6 over MPLS, AToM, VPLS, MPLS OAM etc.). You will get a comprehensive overview of all the aspects of MPLS, including the building blocks, its applications, troubleshooting and a perspective on the future of MPLS.
A complete configuration manual for MPLS, MPLS VPNs, MPLS TE, QoS, Any Transport over MPLS (AToM), and VPLS Understand the crucial Cisco commands for various MPLS scenarios Understand fundamentals of MPLS operation and learn to configure basic MPLS in Frame Relay and ATM-based environments Master fundamentals of MPLS VPN operation including Multiprotocol BGP (MBGP) operation, VPNv4 route exchange, and basic MPLS VPN configuration in the provider network Understand and configure various PE-CE routing protocols in MPLS VPN networks Understand MPLS VPN provisioning in an Inter-provider VPN (Inter-AS) and Carrier Supporting Carrier (CSC) environment Learn MPLS TE and its advanced features Examine AToM with configuration examples for like-to-like and any-to-any L2 VPN implementations and VPLS components and operation, VPLS configuration and verification, and VPLS topologies Learn about MPLS QoS, including configuration and implementation of uniform and short pipe modes MPLS Configuration on Cisco IOS Softwareis a complete and detailed resource to the configuration of Multiprotocol Label Switching (MPLS) networks and associated features. Through its practical, hands-on approach, you’ll become familiar with MPLS technologies and their configurations using Cisco IOS® Software. MPLS Configuration on Cisco IOS Softwarecovers basic-to-advanced MPLS concepts and configuration. Beyond its emphasis on MPLS, you’ll learn about applications and deployments associated with MPLS, such as traffic engineering (TE), Layer 2 virtual private networks (VPN), and Virtual Private LAN Service (VPLS). You’ll receive practical guidance and deployment scenarios that can be enhanced by re-creation of the setups and configurations demonstrated within this book. You’ll move quickly from a brief overview of MPLS technology and basic MPLS configuration on Cisco® routers to more advanced topics. Several chapters provide instruction on VPN connectivity options, including implementing Border Gateway Protocol (BGP) in MPLS VPNs. You’ll receive configuration guidelines for advanced MPLS implementations such as MPLS TE, quality of service (QoS), and extranet VPNs. You’ll learn about implementation of Layer 2 VPNs versus Layer 3 VPNs with Cisco Any Transport over MPLS (AToM). And you’ll see demonstrations of implementing VPLS on Cisco routers complete with the configurations and platform support. “I highly recommendMPLS Configuration on Cisco IOS Softwareas required reading for those in search of practical guidance of the technology and nuances of configuring MPLS for next-generation networks for voice, video, data, and application service offerings across a wide variety of deployment scenarios.” –Carlos Dominguez, Senior Vice President, Worldwide Service Provider Operations, Cisco Systems® This book is part of the Networking Technology Series from Cisco Press®, which offers networking professionals valuable information for constructing efficient networks, understanding new technologies, and building successful careers.
Helping readers master important IP and MPLS concepts, this instructive resource is written by a technical leader for the MPLS Group from Cisco Systems Internet Technologies Division. The book guides networking professionals as they design fault tolerant networks.
This revised version of the bestselling first edition provides a self-study complement to the Cisco CCIP training course implementing Cisco MPLS. Extensive case studies guide readers through the design and deployment of real-world MPLS/VPN networks MPLS and VPN Architectures.
Field-proven MPLS designs covering MPLS VPNs, pseudowire, QoS, traffic engineering, IPv6, network recovery, and multicast Understand technology applications in various service provider and enterprise topologies via detailed design studies Benefit from the authors’ vast experience in MPLS network deployment and protocol design Visualize real-world solutions through clear, detailed illustrations Design studies cover various operator profiles including an interexchange carrier (IXC), a national telco deploying a multiservice backbone carrying Internet and IP VPN services as well as national telephony traffic, an international service provider with many POPs all around the globe, and a large enterprise relying on Layer-3 VPN services to control communications within and across subsidiaries Design studies are thoroughly explained through detailed text, sample configurations, and network diagrams Definitive MPLS Network Designs provides examples of how to combine key technologies at the heart of IP/MPLS networks. Techniques are presented through a set of comprehensive design studies. Each design study is based on characteristics and objectives common to a given profile of network operators having deployed MPLS and discusses all the corresponding design aspects. The book starts with a technology refresher for each of the technologies involved in the design studies. Next, a series of design studies is presented, each based on a specific hypothetical network representative of service provider and enterprise networks running MPLS. Each design study chapter delivers four elements. They open with a description of the network environment, including the set of supported services, the network topology, the POP structure, the transmission facilities, the basic IP routing design, and possible constraints. Then the chapters present design objectives, such as optimizing bandwidth usage. Following these are details of all aspects of the network design, covering VPN, QoS, TE, network recovery, and—where applicable—multicast, IPv6, and pseudowire. The chapters conclude with a summary of the lessons that can be drawn from the design study so that all types of service providers and large enterprise MPLS architects can adapt aspects of the design solution to their unique network environment and objectives. Although network architects have many resources for seeking information on the concepts and protocols involved with MPLS, there is no single resource that illustrates how to design a network that optimizes their benefits for a specific operating environment. The variety of network environments and requirements makes it difficult to provide a one-size-fits-all design recommendation. Definitive MPLS Network Designs fills this void. “This book comes as a boon to professionals who want to understand the power of MPLS and make full use of it.” -Parantap Lahiri, Manager, IP Network Infrastructure Engineering, MCI Includes a FREE 45-Day Online Edition This book is part of the Networking Technology Series from Cisco Press®, which offers networking professionals valuable information for constructing efficient networks, understanding new technologies, and building successful careers.
Design, configure, and manage MPLS TE to optimize network performance Almost every busy network backbone has some congested links while others remain underutilized. That's because shortest-path routing protocols send traffic down the path that is shortest without considering other network parameters, such as utilization and traffic demands. Using Traffic Engineering (TE), network operators can redistribute packet flows to attain more uniform distribution across all links. Forcing traffic onto specific pathways allows you to get the most out of your existing network capacity while making it easier to deliver consistent service levels to customers at the same time. Cisco(r) Multiprotocol Label Switching (MPLS) lends efficiency to very large networks, and is the most effective way to implement TE. MPLS TE routes traffic flows across the network by aligning resources required by a given flow with actual backbone capacity and topology. This constraint-based routing approach feeds the network route traffic down one or more pathways, preventing unexpected congestion and enabling recovery from link or node failures. Traffic Engineering with MPLSprovides you with information on how to use MPLS TE and associated features to maximize network bandwidth. This book focuses on real-world applications, from design scenarios to feature configurations to tools that can be used in managing and troubleshooting MPLS TE. Assuming some familiarity with basic label operations, this guide focuses mainly on the operational aspects of MPLS TE-how the various pieces work and how to configure and troubleshoot them. Additionally, this book addresses design and scalability issues along with extensive deployment tips to help you roll out MPLS TE on your own network. Understand the background of TE and MPLS, and brush up on MPLS forwarding basics Learn about router information distribution and how to bring up MPLS TE tunnels in a network Understand MPLS TE's Constrained Shortest Path First (CSPF) and mechanisms you can use to influence CSPF's path calculation Use the Resource Reservation Protocol (RSVP) to implement Label-Switched Path setup Use various mechanisms to forward traffic down a tunnel Integrate MPLS into the IP quality of service (QoS) spectrum of services Utilize Fast Reroute (FRR) to mitigate packet loss associated with link and node failures Understand Simple Network Management Protocol (SNMP)-based measurement and accounting services that are available for MPLS Evaluate design scenarios for scalable MPLS TE deployments Manage MPLS TE networks by examining common configuration mistakes and utilizing tools for troubleshooting MPLS TE problems "Eric and Ajay work in the development group at Cisco that built Traffic Engineering. They are among those with the greatest hands-on experience with this application. This book is the product of their experience." -George Swallow, Cisco Systems, Architect for Traffic Engineering Co-Chair, IETF MPLS Working Group Eric Osborne, CCIE(r) #4122, has been doing Internet engineering of one sort or another since 1995. He joined Cisco in 1998 to work in the Cisco Technical Assistance Center (TAC), moved from there to the ISP Expert team and then to the MPLS Deployment team. He has been involved in MPLS since the Cisco IOS(r) Software Release 11.1CT days. Ajay Simha, CCIE #2970, joined the Cisco TAC in 1996. He then went on to support tier 1 and 2 ISPs as part of Cisco's ISP Expert team. Ajay has been working as an MPLS deployment engineer since October 1999, and he has first-hand experience in troubleshooting, designing, and deploying MPLS.
An in-depth guide to understanding advanced MPLS implementation, including packet-based VPNs, ATM-based VPNs, traffic engineering, and quality of service "Advanced MPLS Design and Implementation" enables you to: Understand MPLS through a detailed analysis of MPLS architecture and operationDesign and implement packet-based MPLS Virtual Private Networks (VPNs) using label switching routers (LSRs)Design and implement ATM-based MPLS VPNs using WAN-switched ATM LSRsImplement MPLS traffic engineering on your core network and optimize traffic flows dynamicallyImplement MPLS QoS and provide hard service guarantees with multiple classes of serviceAcquire practical design and implementation knowledge of real-world MPLS VPNs, TE, and QoS through case studies and configuration examples Multiprotocol Label Switching (MPLS) is a highly scalable, high-performance forwarding technology that has multiple applications in the service provider and enterprise environment. This book is intended for internetwork engineers and administrators who are responsible for designing, implementing, and supporting service provider or enterprise MPLS backbone networks. It contains a broad range of technical details on MPLS and its associated protocols, packet-based MPLS, ATM-based MPLS, MPLS traffic engineering, MPLS QoS, MPLS design, and advanced MPLS architectures. This book contains MPLS theory, design, configuration, and various case studies. Use this book as a reference and guide for designing, implementing, and supporting an MPLS network. Even if you're not using Cisco(r) equipment, this book can increase your awareness and understanding of MPLS technology as well as provide you with detailed designconcepts and rules for building scalable MPLS networks. "Advanced MPLS Design and Implementation" is your guide to understanding, designing, and implementing MPLS VPNs, WAN-switched MPLS VPNs, MPLS traffic engineering, and MPLS QoS.
Several trends are hastening the use of MPLS-based VPNs in broadband networks. With this rapid evolution, networking professionals need resources like this new volume.
Understand the business case for deploying MPLS-based services and solutions * Provides network managers and architects a precise MPLS primer * Defines MPLS service problems and their associated solutions * Includes ROI models for MPLS-based solutions * Discusses pros and cons of various options for each MPLS service Network managers often question the value that MPLS brings to their business environment. This book provides them with a precise guide for evaluating the benefits of MPLS-based applications and solutions. The book guides the network manager through the business case for MPLS by exploring other technology alternatives, including their applications, benefits, and deficiencies. Understanding the service creation process as the basis for MPLS-based solutions is pivotal when describing the benefits that MPLS offers. Furthermore, the book explores MPLS technology and its components, providing an overview of the architecture necessary to reap the true advantages that MPLS brings to a service provider or enterprise network. These advantages include new revenue opportunities and a total cost of ownership reduction that positively impacts a company`s bottom-line. ROI models and case study examples further confirm the business impact and help decision-makers create a blueprint for MPLS service creation. Specific aspects such as security, network management, advanced services and the future of the technology complete the book, helping decision makers assess MPLS as a candidate for implementation. In short, you can use this comprehensive guide to understand and build a business case for the inclusion of MPLS in your network.
A comprehensive guide to implementing QoS in IP/MPLS networks using Cisco IOS and Cisco IOS XR Software Understand IP QoS architectures and how they apply to MPLS Take a detailed look at traffic management using policing, shaping, scheduling, and active queue management Study Cisco QoS behavioral model and the modular QoS command-line interface (MQC) Learn the operation of MPLS TE with its DiffServ extensions and applicability as a traffic-protection alternative Find multiple configuration and verification examples illustrating the implementation of MPLS TE, DS-TE, and FRR Review the different designs, ranging from a best-effort backbone to the most elaborate scenarios combining DiffServ, DS-TE, and FRR Quality of service (QoS) plays a key role in the implementation of IP and MPLS networks today. However, QoS can be one of the most complex aspects of networking. The industry efforts to achieve convergence have generated a need for increased levels of traffic differentiation. Today’s networks need to meet an array of QoS requirements to support distinct applications (such as voice, video, and data) and multiple network services (such as IP, Ethernet, and ATM) on a single converged, multiservice network. QoS has therefore has become an integral part of network design, implementation, and operation. QoS for IP/MPLS Networks is a practical guide that will help you facilitate the design, deployment, and operation of QoS using Cisco® IOS® Software and Cisco IOS XR Software. The book provides a thorough explanation of the technology behind MPLS QoS and related technologies, including the different design options you can use to build an MPLS network with strict performance requirements. This book discusses MPLS Traffic Engineering (MPLS TE) as a tool to complement MPLS QoS and enhance the performance characteristics of the network. You’ll learn technology, configuration, and operational details, including the essentials facts about the behavior and configuration of the rich MPLS QoS and related MPLS TE functionality. To get the most out of this book, you should have a basic understanding of both IP and MPLS, including the basics of IP addressing and routing and the basics of MPLS forwarding.
