Modelling, Simulation and Control of Urban Wastewater Systems

Modelling, Simulation and Control of Urban Wastewater Systems

Author: Manfred Schütze

Publisher: Springer Science & Business Media

Published: 2011-06-27

Total Pages: 371

ISBN-13: 144710157X

DOWNLOAD EBOOK

by Professor Poul Harremoes Environmental engineering has been a discipline dominated by empirical approaches to engineering. Historically speaking, the development of urban drainage structures was very successful on the basis of pure empiricism. Just think of the impressive structures built by the Romans long before the discipline of hydraulics came into being. The fact is that the Romans did not know much about the theories of hydraulics, which were discovered as late as the mid-1800s. However, with the Renaissance came a new era. Astronomy (Galileos) and basic physics (Newton) started the scientific revolution and in the mid-1800s Navier and Stokes developed the application of Newtons laws to hydrodynamics, and later, St. Venant the first basic physics description of the motion of water in open channels. The combination of basic physical understanding of the phenomena involved in the flow of water in pipes and the experience gained by "trial and error", the engineering approach to urban drainage improved the design and performance of the engineering drainage infrastructure. However, due to the mathematical complications of the basic equations, solutions were available only to quite simple cases of practical significance until the introduction of new principles of calculation made possible by computers and their ability to crunch numbers. Now even intricate hydraulic phenomena can be simulated with a reasonable degree of confidence that the simulations are in agreement with performance in practice, if the models are adequately calibrated with sample performance data.


Optimization of Urban Wastewater Systems using Model Based Design and Control

Optimization of Urban Wastewater Systems using Model Based Design and Control

Author: Carlos Alberto Velez Quintero

Publisher: CRC Press

Published: 2020-11-25

Total Pages: 250

ISBN-13: 1000116425

DOWNLOAD EBOOK

A considerable amount of scientific evidence has been collected leading to the conclusion that urban wastewater components should be designed as one integrated system, in order to protect the receiving waters cost-effectively. Moreover, there is a need to optimize the design and operation of the sewerage network and wastewater treatment plant (WwTP) considering the dynamic interactions between them and the receiving waters. This book introduces a method called Model Based Design and Control (MoDeCo) for the optimum design and control of urban wastewater components. The book presents a detailed description of the integration of modelling tools for the sewer, the wastewater treatment plants and the rivers. The complex modelling structure used for the integrated model challenge previous applications of integrated modelling approaches presented in scientific literature. The combination of modelling tools and multi-objective evolutionary algorithms demonstrated in this book represent an excellent tool for designers and managers of urban wastewater infrastructure. This book also presents two alternatives to solve the computing demand of the optimization of integrated systems in practical applications: the use of surrogate modelling tools and the use of cloud computer infrastructure for parallel computing.


Urban Water Management

Urban Water Management

Author: Roumen Arsov

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 362

ISBN-13: 9401000573

DOWNLOAD EBOOK

Urban population growth dramatically alters material and energy fluxes in the affected areas, with concomitant changes in landscape, altered fluxes of water, sediment, chemicals and pathogens and increased releases of waste heat. These changes then impact on urban ecosystems, including water resources and result in their degradation. Such circumstances make the provision of water services to urban populations even more challenging. Changing weather patterns, rising temperature and large variations in precipitation contr- ute to increased damages, caused by weather related disasters, including floods. Ones of the major contributors to increasing flood peaks are land use changes and particularl- urban development. Consequently, there is a need to look for low environmental impact land development and to manage runoff in urban areas by storm water management. Much progress in the management of urban waters has been achieved in the most - vanced jurisdictions, but much more remains to be done. In this respect the EC Water Framework Directive can provide some guidance. Urban water management issues are particularly important in the countries in transition in Central and Eastern Europe. During the last decade political, economical and social changes in the countries under transition have influenced almost every element of the public sector, including water services. There is an urgent need for exchange of information among various countries on this issue and for identification of best approaches to achieving this transition.


Urban Water Management for Future Cities

Urban Water Management for Future Cities

Author: Stephan Köster

Publisher: Springer

Published: 2019-01-21

Total Pages: 495

ISBN-13: 3030014886

DOWNLOAD EBOOK

This book features expert contributions on key sustainability aspects of urban water management in Chinese agglomerations. Both technical and institutional pathways to sustainable urban water management are developed on the basis of a broad, interdisciplinary problem analysis.


Model Predictive Control of Wastewater Systems

Model Predictive Control of Wastewater Systems

Author: Carlos Ocampo-Martinez

Publisher: Springer Science & Business Media

Published: 2010-10-01

Total Pages: 236

ISBN-13: 1849963533

DOWNLOAD EBOOK

The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies ..., new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. The water and wastewater industry has undergone many changes in recent years. Of particular importance has been a renewed emphasis on improving resource management with tighter regulatory controls setting new targets on pricing, industry efficiency and loss reduction for both water and wastewater with more stringent environmental discharge conditions for wastewater. Meantime, the demand for water and wastewater services grows as the population increases and wishes for improved living conditions involving, among other items, domestic appliances that use water. Consequently, the installed infrastructure of the industry has to be continuously upgraded and extended, and employed more effectively to accommodate the new demands, both in throughput and in meeting the new regulatory conditions. Investment in fixed infrastructure is capital-intensive and slow to come on-stream. One outcome of these changes and demands is that the industry is examining the potential benefits of, and in many cases using, more advanced control systems.


Identification and Control

Identification and Control

Author: Ricardo S. Sánchez-Peña

Publisher: Springer Science & Business Media

Published: 2007-06-28

Total Pages: 330

ISBN-13: 1846288991

DOWNLOAD EBOOK

This book meets head-on the difficulty of making practical use of new systems theory, presenting a selection of varied applications together with relevant theory. It shows how workable identification and control solutions can be derived by adapting and extrapolating from the theory. Each chapter has a common structure: a brief presentation of theory; the description of a particular application; experimental results; and a section highlighting, explaining and laying out solutions to the discrepancy between the theoretical and the practical.


Urban Drainage Modeling

Urban Drainage Modeling

Author: Robert W. Brashear

Publisher:

Published: 2001

Total Pages: 970

ISBN-13:

DOWNLOAD EBOOK

This collection contains 91 papers presented at a specialty symposium on urban drainage modeling at the World Water and Environmental Resources Congress, held in Orlando, Florida, May 20-24, 2001.


Guidelines for Using Activated Sludge Models

Guidelines for Using Activated Sludge Models

Author: Leiv Rieger

Publisher: IWA Publishing

Published: 2012-09-14

Total Pages: 287

ISBN-13: 1843391740

DOWNLOAD EBOOK

Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22


Water-Wise Cities and Sustainable Water Systems

Water-Wise Cities and Sustainable Water Systems

Author: Xiaochang C. Wang

Publisher: IWA Publishing

Published: 2020-12-15

Total Pages: 400

ISBN-13: 9781789060751

DOWNLOAD EBOOK

Building water-wise cities is a pressing need nowadays in both developed and developing countries. This is mainly due to the limitation of the available water resources and aging infrastructure to meet the needs of adapting to social and environmental changes and for urban liveability. This is the first book to provide comprehensive insights into theoretical, systematic, and engineering aspects of water-wise cities with a broad coverage of global issues. The book aims to (1) provide a theoretical framework of water-wise cities and associated sustainable water systems including key concepts and principles, (2) provide a brand-new thinking on the design and management of sustainable urban water systems of various scales towards a paradigm shift under the resource and environmental constraints, and (3) provide a technological perspective with successful case studies of technology selection, integration, and optimization on the “fit-for-purpose” basis.