Solid oxide fuel cells offer great prospects for the sustainable, clean and safe conversion of various fuels into electrical energy. In this thesis, the performance-determining loss processes for the cell operation on reformate fuels are elucidated via electrochemical impedance spectroscopy. Model-based analyses reveal the electrochemical fuel oxidation mechanism, the coupling of fuel gas transport and reforming chemistry and the impact of fuel impurities on the degradation of each loss process.
This work presents a numerical FEM framework, capable of predicting SOFC performance under technically relevant, planar stack contacting conditions. A high level of confidence in the model predictions is supplied by using exclusively experimentally determined material/kinetic parameters and by a comprehensive validation. The presented model aids SOFC stack development by pre-evaluating possible material choices and design combinations for cells/interconnectors without any experimental effort.
This work deals with microstructural characterisation, modelling and simulation of SOFC electrodes with the goal of optimizing the electrode microstructures. Methods for a detailed electrode analysis based on focused ion beam (FIB) tomography are presented. A 3D FEM model able to perform simulations of LSCF cathodes based on 3D tomography data is shown. A model generating realistic, yet synthetic microstructures is presented that enables the optimization of microstructural characteristics.
Mixed ionic-electronic conducting (MIEC) ceramics as oxygen transport membranes (OTMs) can provide high oxygen permeation rates at comparably low energy demands. For this purpose, Ba?.?Sr?.?Co?.?Fe?.?O??? (BSCF) shows the best performance under ideal operating conditions. Thermal and chemical stability investigations, electrical behavior ?(T,pO?,t), and oxygen exchange parameter extraction by means of electrical conductivity relaxation resulted in a far better understanding of the BSCF system.
In this book, a new procedure to analyze lithium-ion cells is introduced. The cells are disassembled to analyze their components in experimental cell housings. Then, Electrochemical Impedance Spectroscopy, time domain measurements and the Distribution function of Relaxation Times are applied to obtain a deep understanding of the relevant loss processes. This procedure yields a notable surplus of information about the electrode contributions to the overall internal resistance of the cell.
A complete, up-to-date, introductory guide to fuel cell technology and application Fuel Cell Fundamentals provides a thorough introduction to the principles and practicalities behind fuel cell technology. Beginning with the underlying concepts, the discussion explores fuel cell thermodynamics, kinetics, transport, and modeling before moving into the application side with guidance on system types and design, performance, costs, and environmental impact. This new third edition has been updated with the latest technological advances and relevant calculations, and enhanced chapters on advanced fuel cell design and electrochemical and hydrogen energy systems. Worked problems, illustrations, and application examples throughout lend a real-world perspective, and end-of chapter review questions and mathematical problems reinforce the material learned. Fuel cells produce more electricity than batteries or combustion engines, with far fewer emissions. This book is the essential introduction to the technology that makes this possible, and the physical processes behind this cost-saving and environmentally friendly energy source. Understand the basic principles of fuel cell physics Compare the applications, performance, and costs of different systems Master the calculations associated with the latest fuel cell technology Learn the considerations involved in system selection and design As more and more nations turn to fuel cell commercialization amidst advancing technology and dropping deployment costs, global stationary fuel cell revenue is expected to grow from $1.4 billion to $40.0 billion by 2022. The sector is forecasted to explode, and there will be a tremendous demand for high-level qualified workers with advanced skills and knowledge of fuel cell technology. Fuel Cell Fundamentals is the essential first step toward joining the new energy revolution.
This volume explores the relationship between language and culture while considering its implications for the teaching of modern foreign languages in higher education. Drawing on a comparative empirical study conducted at universities both in the UK and US, this text problematises the impacts of a separation of language and content in German degree programmes. Illustrating the need for a curriculum which fosters the development of intercultural competence and criticality, Parks reconceptualises established models of criticality (Barnett) and intercultural communicative competence (Byram). The chapters in this volume discuss a range of important topics including; language graduates with deep translingual and transcultural competence, observed differences and similarities between British and American universities and faculty and student voices: developing intercultural competence and criticality. Aimed at scholars with research interests in intercultural communication, language education and applied linguistics, this volume provides a thorough discussion for the ways in which modern language programmes in higher education can be improved. Additionally, those carrying out research in the fields of language teaching and language policy in higher education will find Developing Critical Cultural Awareness in Modern Languages to be of great relevance.
This book focuses on the fundamental principles and latest research findings in hydrogen energy fields including: hydrogen production, hydrogen storage, fuel cells, hydrogen safety, economics, and the impact on society. Further, the book introduces the latest development trends in practical applications, especially in commercial household fuel cells and commercial fuel cell vehicles in Japan. This book not only helps readers to further their basic knowledge, but also presents the state of the art of hydrogen-energy-related research and development. This work serves as an excellent reference for beginners such as graduate students, as well as a handbook and systematic summary of entire hydrogen-energy systems for scientists and engineers.
Fuel cells are attractive electrochemical energy converters featuring potentially very high thermodynamic efficiency factors. The focus of this volume of Advances in Chemical Engineering is on quantitative approaches, particularly based on chemical engineering principles, to analyze, control and optimize the steady state and dynamic behavior of low and high temperature fuel cells (PEMFC, DMFC, SOFC) to be applied in mobile and stationary systems. - Updates and informs the reader on the latest research findings using original reviews - Written by leading industry experts and scholars - Reviews and analyzes developments in the field
Design and Operation of Solid Oxide Fuel Cells: The Systems Engineering Vision for Industrial Application presents a comprehensive, critical and accessible review of the latest research in the field of solid oxide fuel cells (SOFCs). As well as discussing the theoretical aspects of the field, the book explores a diverse range of power applications, such as hybrid power plants, polygeneration, distributed electricity generation, energy storage and waste management—all with a focus on modeling and computational skills. Dr. Sharifzadeh presents the associated risks and limitations throughout the discussion, providing a very complete and thorough analysis of SOFCs and their control and operation in power plants. The first of its kind, this book will be of particular interest to energy engineers, industry experts and academic researchers in the energy, power and transportation industries, as well as those working and researching in the chemical, environmental and material sectors. - Closes the gap between various power engineering disciples by considering a diverse variety of applications and sectors - Presents and reviews a variety of modeling techniques and considers regulations throughout - Includes CFD modeling examples and process simulation and optimization programming guidance
