Mixed-mode Crack Behavior
Author: Keith John Miller
Publisher: ASTM International
Published: 1999
Total Pages: 340
ISBN-13: 0803126026
DOWNLOAD EBOOKPosts
Multiaxial Fatigue and Fracture
Author: E. Macha
Publisher: Elsevier
Published: 1999-09-06
Total Pages: 289
ISBN-13: 008053712X
DOWNLOAD EBOOKThis volume contains 18 papers selected from 90 presented at the Fifth International Conference on Biaxial/Multiaxial Fatigue and Fracture held in Cracow, Poland 8-12 September 1997. The papers in this book deal with theoretical, computational and experimental aspects of the multiaxial fatigue and fracture of engineering materials and structures. The papers are divided into the following four categories: 1. Proportional cyclic loading 2. Non-proportional cyclic loading 3. Variable amplitude and random loading 4. Crack growthMost papers in this publication talk about the behaviour of constructional materials and elements of machines under non-proportional loading and under variable amplitude and random loading, which are more realistic load histories met in industrial practice. Variable amplitude loading under cyclic load with basic frequency and random loading under load with a continuous band of frequency is classified here. This book gives a review of the latest world success and directions of investigations on multiaxial fatigue and fracture. More and more often publications are results of the co-operation of researchers from different laboratories and countries. Seven out of eighteen papers included here were worked out by international authors teams. This is a symptom of the times, when science and investigations know no borders.
Biaxial/Multiaxial Fatigue and Fracture
Author: Andrea Carpinteri
Publisher: Elsevier
Published: 2003-03-19
Total Pages: 517
ISBN-13: 0080527817
DOWNLOAD EBOOKThe European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.
Handbook of Fatigue Crack Propagation in Metallic Structures
Author: A. Carpinteri
Publisher: Newnes
Published: 2012-12-02
Total Pages: 834
ISBN-13: 0444600329
DOWNLOAD EBOOKThe purpose of this Handbook is to provide a review of the knowledge and experiences in the field of fatigue fracture mechanics. It is well-known that engineering structures can fail due to cyclic loading. For instance, a cyclically time-varying loading reduces the structure strength and can provoke a fatigue failure consisting of three stages: (a) crack initiation (b) crack propagation and (c) catastrophic failure. Since last century many scientists have tried to understand the reasons for the above-mentioned failures and how to prevent them. This Handbook contains valuable contributions from leading experts within the international scientific community and covers many of the important problems associated with the fatigue phenomena in civil, mechanical and nuclear engineering.
Notch Effects in Fatigue and Fracture
Author: G. Pluvinage
Publisher: Springer Science & Business Media
Published: 2012-12-06
Total Pages: 361
ISBN-13: 9401008809
DOWNLOAD EBOOKAs Directors of this NATO Workshop, we welcome this opportunity to record formally our thanks to the NATO Scientific Affairs Division for making our meeting possible through generous financial support and encouragement. This meeting has two purposes: the first obvious one because we have collected scientists from East, far East and west to discuss new development in the field of fracture mechanics: the notch fracture mechanics. The second is less obvious but perhaps in longer term more important that is the building of bridges between scientists in the frame of a network called Without Walls Institute on Notch Effects in Fatigue and Fracture". Physical perception of notch effects is not so easy to understand as the presence of a geometrical discontinuity as a worst effect than the simple reduction of cross section. Notch effects in fatigue and fracture is characterised by the following fundamental fact: it is not the maximum local stress or stress which governs the phenomena of fatigue and fracture. The physic shows that a process volume is needed probably to store the necessary energy for starting and propagating the phenomenon. This is a rupture of the traditional "strength of material" school which always give the prior importance of the local maximum stress. This concept of process volume was strongly affirmed during this workshop.
Multiaxial Fatigue and Deformation Testing Techniques
Author: Sreeramesh Kalluri
Publisher: ASTM International
Published: 1997
Total Pages: 310
ISBN-13: 0803120451
DOWNLOAD EBOOKFourteen papers from the May 1995 symposium focus on the advances that new materials testing equipment and digital computers have made possible. Representative topics: testing facilities for multiaxial loading of tubular specimens, biaxial deformation experiments over multiple string regimes, charac
Fracture Mechanics Testing Methods for Polymers, Adhesives and Composites
Author: D.R. Moore
Publisher: Elsevier
Published: 2001-03-09
Total Pages: 389
ISBN-13: 0080531962
DOWNLOAD EBOOKThis book is an overview of ESIS Technical Committee 4's activities since the mid-1980s. A wide range of tests is described and the numerous authors is a reflection of the wide and enthusiastic support we have had. With the establishment of the Technical Committee 4, two major areas were identified as appropriate for the activity. Firstly there was an urgent need for standard, fracture mechanics based, test methods to be designed for polymers and composites. A good deal of academic work had been done, but the usefulness to industry was limited by the lack of agreed standards. Secondly there was a perceived need to explore the use of such data in the design of plastic parts. Some modest efforts were made in early meetings to explore this, but little progress was made. In contrast things moved along briskly in the standards work and this has dominated the activity for the last fourteen years. The design issue remains a future goal.
Fracture Mechanics: Applications and Challenges
Author: M. Fuentes
Publisher: Elsevier
Published: 2000-09-13
Total Pages: 275
ISBN-13: 0080531997
DOWNLOAD EBOOKThis book contains 15 fully peer-reviewed Invited Papers which were presented at the 13th Biennial European Conference on Fracture and is a companion to the CD-ROM http://www.elsevier.com/locate/isbn/008043701xProceedings. The organisers of the ECF 13 opted from the very beginning for an application-orientated conference, and consequently, this book contributes to the understanding of fracture phenomena, and disseminates fracture concepts and their application to the solution of engineering problems to practitioners in a wide range of fields. The fields covered in this book can be broadly classified into: elastic-plastic fracture mechanics, fracture dynamics, fatigue and interactive processes, failure, structural integrity, coatings and materials, with applications to the following industrial sectors: transport, aerospace engineering, civil engineering, pipelines and automotive engineering.
Application of Fracture Mechanics to Polymers, Adhesives and Composites
Author: D R Moore
Publisher: Elsevier
Published: 2003-12-04
Total Pages: 299
ISBN-13: 0080553079
DOWNLOAD EBOOKApplication of Fracture Mechanics to Polymers, Adhesives and Composites
Fracture of Polymers, Composites and Adhesives
Author: A Pavan
Publisher: Elsevier
Published: 2000-10-10
Total Pages: 439
ISBN-13: 0080532004
DOWNLOAD EBOOKThis book contains a selection of fully peer-reviewed papers which were presented at the 2nd ESIS TC4 Conference, held in Les Diablerets, Switzerland 13 - 15 September 1999. The meeting was designed to reflect the activities of the Committee over the last 15 years, and to plan future activities. The papers have been divided into four chapters under the headings of Composites, Elastic-Plastic Fracture, Adhesion, and Impact and General Fracture. These are convenient groupings, but there are many interactions between the areas, with the common theme of Fracture Mechanics underlying it all.
