The book addresses the interdisciplinary area of water quality monitoring and binds together interests and competences within sensing technology, system behaviour, business needs, legislation, education, data handling, and artificial response algorithms.
Maintaining the microbial quality in distribution systems and connected installations remains a challenge for the water supply companies all over the world, despite many years of research. This book identifies the main concerns and knowledge gaps related to regrowth and stimulates cooperation in future research. Microbial Growth in Drinking Water Supplies provides an overview of the regrowth issue in different countries and the water quality problems related to regrowth. The book assesses the causes of regrowth in drinking water and the prevention of regrowth by water treatment and distribution. Editors: Dirk van der Kooij and Paul W.J.J. van der Wielen, KWR Watercycle Research Institute, The Netherlands
Heterotrophic Plate Counts and Drinking-water Safety provides a critical assessment of the role of the Heterotrophic Plate Count (HPC) measurement in drinking water quality management. It was developed from an Expert workshop of 32 scientists convened by the World Health Organization and the WHO/NSF International Collaborating Centre for Drinking Water Safety and Treatment in Geneva, Switzerland. Heterotrophs are organisms, including bacteria, yeasts and moulds, that require an external source of organic carbon for growth. The HPC test (or Standard Plate Count), applied in many variants, is the internationally accepted test for measuring the hetrotrophic microorganism population in drinking water, and also other media. It measures only a fraction of the microorganisms actually present and does not distinguish between pathogens and non-pathogens. High levels of microbial growth can affect the taste and odor of drinking water and may indicate the presence of nutrients and biofilms which could harbor pathogens, as well as the possibility that some event has interfered with the normal production of the drinking water. HPC counts also routinely increase in water that has been treated by an in-line device such as a carbon filter or softener, in water-dispensing devices and in bottled waters and indeed in all water that has suitable nutrients, does not have a residual disinfectant, and is kept under sufficient conditions. There is debate among health professionals as to the need, utility or quantitative basis for health-based standards or guidelines relating to HPC-measured regrowth in drinking water. The issues that were addressed in this work include: the relationship between HPC in drinking water (including that derived from in-line treatment systems, dispensers and bottled water) and health risks for the general public the role of HPC as an indirect indicator or index for pathogens of concern in drinking water the role of HPC in assessing the efficacy and proper functioning of water treatment and supply processes the relationship between HPC and the aesthetic acceptability of drinking water. Heterotrophic Plate Counts and Drinking-water Safety provides valuable information on the utility and the limitations of HPC data in the management and operation of piped water systems as well as other means of providing drinking water to the public. It is of particular value to piped public water suppliers and bottled water suppliers, manufacturers and users of water treatment and transmission equipment and inline treatment devices, water engineers, sanitary and clinical microbiologists, and national and local public health officials and regulators of drinking water quality.
Bottled and Packaged Water, Volume Four in The Science of Beverages series, offers great perspectives on current trends in drinking water research, quality control techniques, packaging strategies, and current concerns in the field, thus revealing the most novel standards in the industry. As consumer demand for bottled and packaged water has increased, the need for scientists and researchers to understand how to analyze water quality, safety, and control are essential. This all-encompassing resource for research and development in this flourishing field covers everything from sensory and chemical composition, to materials and manufacturing. - Presents a detailed analysis and sensory characteristics of water to foster research and innovation - Provides the latest technological advancements and microbiological characterization methods in the field - Includes regulatory tools for beverage packaging to help industry personnel maintain compliance
Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.
The best papers from the three-day conference on Safe Drinking Water from Source to Tap June 2009 in Maastricht are published in this book covering the themes of challenges of the water sector and adaptive strategies, treatment, distribution, risk assessment and risk management, sensors and monitoring, small scale systems, simulation, alternative water supply & sources, consumer involvement, and future drinking water. Worldwide, the water supply sector is facing tremendous challenges. Every new emerging contaminants and pathogens and aging infrastructures that are vulnerable for deliberate contamination pose a threat to the quality of water supplies. Shortage of good quality and readily treatable resources is increasing due to global warming, urbanisation and pollution from agriculture and industry. Regulators and consumers are becoming more demanding. Techneau - the largest European project on drinking water - addresses these challenges by developing adaptive supply system options and new and improved treatment and monitoring technologies. Future system options to be studied are flexible, small scale and multi-source supplies, utilising non conventional resources like brackish ground water, treated wastewater and urban groundwater.
Legionnaires' disease, a pneumonia caused by the Legionella bacterium, is the leading cause of reported waterborne disease outbreaks in the United States. Legionella occur naturally in water from many different environmental sources, but grow rapidly in the warm, stagnant conditions that can be found in engineered water systems such as cooling towers, building plumbing, and hot tubs. Humans are primarily exposed to Legionella through inhalation of contaminated aerosols into the respiratory system. Legionnaires' disease can be fatal, with between 3 and 33 percent of Legionella infections leading to death, and studies show the incidence of Legionnaires' disease in the United States increased five-fold from 2000 to 2017. Management of Legionella in Water Systems reviews the state of science on Legionella contamination of water systems, specifically the ecology and diagnosis. This report explores the process of transmission via water systems, quantification, prevention and control, and policy and training issues that affect the incidence of Legionnaires' disease. It also analyzes existing knowledge gaps and recommends research priorities moving forward.
Analytical Methods for Pesticides and Plant Growth Regulators, Volume XIV: Modern Analytical Techniques covers an updated treatment of the most frequently used techniques for pesticide analysis, i.e., thin-layer chromatography, gas chromatography (packed and capillary columns), high-performance liquid chromatography, and mass spectrometry. People involved in the analysis of pesticides will find the book useful.
Expanding water reuse-the use of treated wastewater for beneficial purposes including irrigation, industrial uses, and drinking water augmentation-could significantly increase the nation's total available water resources. Water Reuse presents a portfolio of treatment options available to mitigate water quality issues in reclaimed water along with new analysis suggesting that the risk of exposure to certain microbial and chemical contaminants from drinking reclaimed water does not appear to be any higher than the risk experienced in at least some current drinking water treatment systems, and may be orders of magnitude lower. This report recommends adjustments to the federal regulatory framework that could enhance public health protection for both planned and unplanned (or de facto) reuse and increase public confidence in water reuse.
This book provides an updated evaluation of the characterization and management of taste and odour (T&O) in source and drinking waters. Authored by international experts from the IWA Specialist Group on Off-flavours in the Aquatic Environment, the book represents an important resource that synthesizes current knowledge on the origins, mitigation, and management of aquatic T&O problems. The material provides new knowledge for an increasing widespread degradation of source waters and global demand for high quality potable water. Key topics include early warning, detection and source-tracking, chemical, sensory and molecular diagnosis, treatment options for common odorants and minerals, source management, modelling and risk assessment, and future research directions. Taste and Odour in Source and Drinking Water is directed towards a wide readership of scientists, engineers, technical operators and managers, and presents both practical and theoretical material, including an updated version of the benchmark Drinking Water Taste and Odour Wheel and a new biological wheel to provide a practical and informative tool for the initial diagnosis of the chemical and biological sources of aquatic T&O.