Methods of Measuring Moisture in Building Materials and Structures
Methods of Measuring Moisture in Building Materials and Structures

Author: Lars-Olof Nilsson

Publisher: Springer

Published: 2018-04-13

Total Pages: 285

ISBN-13: 3319742310

DOWNLOAD EBOOK

RILEM TC 248-MMB was established in 2012 with the main aim to improve and distribute knowledge related to moisture measurement in construction materials in various scientific and industrial applications. Properties and performance of building materials and structures are influenced to a large extent by the moisture conditions in the materials. Obvious examples are heat conductivity, shrinkage and creep, transport properties, most types of deterioration, discoloration etc. For research and applications the moisture conditions must be quantified, by measurements in the laboratory or under field conditions. There is much variation in methods being used, even within the same topic, in different countries, both with regard to materials and to applications. No consensus whatsoever does exist. For the construction industry it is important to be able to quantify the moisture conditions in an accurate way in various applications. This state-of-the-art report is divided into two parts, Principles and Applications, with altogether 28 chapters on various moisture measuring principles and a number of applications.

Damp Indoor Spaces and Health
Damp Indoor Spaces and Health

Author: Institute of Medicine

Publisher: National Academies Press

Published: 2004-10-01

Total Pages: 369

ISBN-13: 0309091934

DOWNLOAD EBOOK

Almost all homes, apartments, and commercial buildings will experience leaks, flooding, or other forms of excessive indoor dampness at some point. Not only is excessive dampness a health problem by itself, it also contributes to several other potentially problematic types of situations. Molds and other microbial agents favor damp indoor environments, and excess moisture may initiate the release of chemical emissions from damaged building materials and furnishings. This new book from the Institute of Medicine examines the health impact of exposures resulting from damp indoor environments and offers recommendations for public health interventions. Damp Indoor Spaces and Health covers a broad range of topics. The book not only examines the relationship between damp or moldy indoor environments and adverse health outcomes but also discusses how and where buildings get wet, how dampness influences microbial growth and chemical emissions, ways to prevent and remediate dampness, and elements of a public health response to the issues. A comprehensive literature review finds sufficient evidence of an association between damp indoor environments and some upper respiratory tract symptoms, coughing, wheezing, and asthma symptoms in sensitized persons. This important book will be of interest to a wide-ranging audience of science, health, engineering, and building professionals, government officials, and members of the public.

Methods of Measuring Moisture in Building Materials and Structures
Methods of Measuring Moisture in Building Materials and Structures

Author: Lars-Olof Nilsson

Publisher:

Published: 2018

Total Pages: 280

ISBN-13: 9783319742328

DOWNLOAD EBOOK

RILEM TC 248-MMB was established in 2012 with the main aim to improve and distribute knowledge related to moisture measurement in construction materials in various scientific and industrial applications. Properties and performance of building materials and structures are influenced to a large extent by the moisture conditions in the materials. Obvious examples are heat conductivity, shrinkage and creep, transport properties, most types of deterioration, discoloration etc. For research and applications the moisture conditions must be quantified, by measurements in the laboratory or under field conditions. There is much variation in methods being used, even within the same topic, in different countries, both with regard to materials and to applications. No consensus whatsoever does exist. For the construction industry it is important to be able to quantify the moisture conditions in an accurate way in various applications. This state-of-the-art report is divided into two parts, Principles and Applications, with altogether 28 chapters on various moisture measuring principles and a number of applications. .

Fundamental Building Technology
Fundamental Building Technology

Author: Andrew J. Charlett

Publisher: Routledge

Published: 2013-01-25

Total Pages: 372

ISBN-13: 1136579818

DOWNLOAD EBOOK

Fundamental Building Technology introduces the technology, methods, and processes fundamental to construction by focussing on what is involved in building a typical low-rise house. Written with the novice in mind, this textbook is the ideal starting point for any construction student, as it fully supports the reader all the way to understanding the functional requirements of each element of the building, and how to take these into account through the building process itself. This second edition is expanded to cover even more relevant topics, and is supported by more resources for use by the student and lecturer. Now included are: An introduction to the planning process and the building regulations How to incorporate a sustainable approach, in the selection of materials and elsewhere A companion site with lecturer’s answers manual and illustrated lecture notes 150 labelled diagrams throughout the book, and multiple self-study questions in every chapter A students’ section of the companion site with multiple choice quizzes and 250 full-colour photos linked to chapters of the book Concise, focussed and the most student-friendly guide to this topic available, Fundamental Building Technology is the perfect textbook for those taking construction technology modules at undergraduate or HNC/HND level.

Advances and Trends in Engineering Sciences and Technologies III
Advances and Trends in Engineering Sciences and Technologies III

Author: Mohamad Al Ali

Publisher: CRC Press

Published: 2019-03-25

Total Pages: 746

ISBN-13: 0429667159

DOWNLOAD EBOOK

These are the proceedings of the 3rd International Conference on Engineering Sciences and Technologies (ESaT 2018), held from 12th - 14th September 2018 in the High Tatras Mountains, Tatranské Matliare, Slovak Republic. ESaT 2018 was organized under the auspices of the Faculty of Civil Engineering, Technical University of Košice - Slovak Republic in collaboration with Peter the Great St. Petersburg Polytechnic University - Russia after the successful organization with excellent feedback of the previous international conferences ESaT 2015 and ESaT 2016. The proceedings is covering various topics and disciplines in civil engineering sciences, such as Buildings and Architectural Engineering, Bearing Structures, Material and Environmental Engineering, Construction Technology and Management, Building Physics and Facilities, Geodesy, Surveying and Mapping, Geotechnics and Traffic Engineering. The proceedings report on new and original progress and trends in various fields of engineering sciences that will be of interest to a wide range of academics and professionals from university and industry. 116 papers originating from more than 10 countries have been accepted for publication in the conference proceedings. Each accepted paper was reviewed by two reviewers, selected according to the scientific area and orientation of the paper, which guarantees topicality, quality and an advanced level of the presented results.

Advances on Testing and Experimentation in Civil Engineering
Advances on Testing and Experimentation in Civil Engineering

Author: Carlos Chastre

Publisher: Springer Nature

Published: 2023-03-28

Total Pages: 403

ISBN-13: 3031238885

DOWNLOAD EBOOK

This book presents the most recent advances on testing and experimentation in civil engineering, especially in the branches of materials, structures, and buildings, complementing the authors’ publication Advances on Testing and Experimentation in Civil Engineering - Geotechnics, Transportation, Hydraulics and Natural Resources. It includes advances in physical modelling, monitoring techniques, data acquisition and analysis, and provides an invaluable contribution to the installation of new civil engineering experimental facilities. The first part of the book covers the latest advances in the testing and experimentation of key domains of materials, such as bio-cementation and self-healing, durability, and recycled materials, as well as the new environmental requirements related to the presence of hazardous substances in construction materials. Furthermore, laboratory and in situ tests, together with equipment needed to estimate the behaviour and durability of construction materials are presented, updating the most important technological advances. The second part of the book highlights the relevance of testing and monitoring in structures, including in situ tests related to static load tests, dynamic tests, and long-term monitoring strategies, as well as laboratory tests of adhesive joints. Experimental tests on shake tables and blast-resistant structures are also described. Recent applications of drone technologies for the inspection and monitoring of civil structures are another important theme developed. Finally, in its third part, the book presents new developments in the characterisation of building testing, with the support of modelling, to assess building pathology and new requirements, acoustic comfort, fire safety, visual comfort, and energy consumption.

Research in Building Physics
Research in Building Physics

Author: J. Carmeliet

Publisher: CRC Press

Published: 2020-12-17

Total Pages: 1037

ISBN-13: 1000108147

DOWNLOAD EBOOK

This text provides a broad view of the research performed in building physics at the start of the 21st century. The focus of this conference was on combined heat and mass flow in building components, performance-based design of building enclosures, energy use in buildings, sustainable construction, users' comfort and health, and the urban micro-climate.