Describes the systematic procedure for using process and mechanical design information to select construction materials suitable for a range of chemical and hydrocarbon processing plants. The volume features tables for locating the American Society for Testing and Materials (ASTM) product form specifications for construction materials that have code-allowable design stresses. It analyzes threshold values for degradation phenomena involving thermal damage.
Describes the systematic procedure for using process and mechanical design information to select construction materials suitable for a range of chemical and hydrocarbon processing plants. The volume features tables for locating the American Society for Testing and Materials (ASTM) product form specifications for construction materials that have code-allowable design stresses. It analyzes threshold values for degradation phenomena involving thermal damage.
The petroleum and chemical industries contain a wide variety of corrosive environments, many of which are unique to these industries. Oil and gas production operations consume a tremendous amount of iron and steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost of corrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs – natural resources, potential hazards, and lost opportunity. Wasting natural resources is a direct contradiction to the growing need for sustainable development. By selecting the correct material and applying proper corrosion protection methods, these costs can be reduced, or even eliminated. This book provides a minimum design requirement for consideration when designing systems in order to prevent or control corrosion damage safely and economically, and addresses: • Corrosion problems in petroleum and chemical industries • Requirements for corrosion control • Chemical control of corrosive environments • Corrosion inhibitors in refineries and petrochemical plants • Materials selection and service life of materials • Surface preparation, protection and maintainability • Corrosion monitoring - plant inspection techniques and laboratory corrosion testing techniques Intended for engineers and industry personnel working in the petroleum and chemical industries, this book is also a valuable resource for research and development teams, safety engineers, corrosion specialists and researchers in chemical engineering, engineering and materials science.
The petroleum and chemical industries contain a wide variety of corrosive environments, many of which are unique to these industries. Oil and gas production operations consume a tremendous amount of iron and steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost of corrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs – natural resources, potential hazards, and lost opportunity. Wasting natural resources is a direct contradiction to the growing need for sustainable development. By selecting the correct material and applying proper corrosion protection methods, these costs can be reduced, or even eliminated. This book provides a minimum design requirement for consideration when designing systems in order to prevent or control corrosion damage safely and economically, and addresses: • Corrosion problems in petroleum and chemical industries • Requirements for corrosion control • Chemical control of corrosive environments • Corrosion inhibitors in refineries and petrochemical plants • Materials selection and service life of materials • Surface preparation, protection and maintainability • Corrosion monitoring - plant inspection techniques and laboratory corrosion testing techniques Intended for engineers and industry personnel working in the petroleum and chemical industries, this book is also a valuable resource for research and development teams, safety engineers, corrosion specialists and researchers in chemical engineering, engineering and materials science.
Powders and bulk solids, handled widely in the chemical, pharmaceutical, agriculture, smelting, and other industries present unique fire, explosion, and toxicity hazards. Indeed, substances which are practically inert in consolidated form may become quite hazardous when converted to powders and granules. The U.S. Chemical Safety and Hazard Investigation Board is currently investigating dust explosions that occured in 2003 at WestPharma, CTA Acoustics, and Hayes-Lemmerz, and is likely to recommend that companies that handle powders or whose operations produce dust pay more attention to understanding the hazards that may exist at their facility. This new CCPS guidelines book will discuss the types of hazards that can occur in a wide range of process equipment and with a wide range of substances, and will present measures to address these hazards.
Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world's chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O'Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
