The definitive overview of the science and metallurgy of aluminum, magnesium, titanium and beryllium alloys, this is the only book available covering the background materials science, properties, manufacturing processes and applications of these key engineering metals in a single accessible volume. Use of these metals is now more widespread than ever, and they are routinely found in motor vehicles and aircraft. New material includes materials characteristics and applications; heat treatment properties; fabrication; microstructure/property relationships; new applications and processes. The definitive single volume overview New material on processing, characteristics and applications of these essential metals Covers the latest applications and processes in the auto and aero industries
The growing use of light alloys in industries such as aerospace, sports equipment and biomedical devices is driving research into surface engineering technologies to enhance their properties for the desired end use. Surface engineering of light alloys: Aluminium, magnesium and titanium alloys provides a comprehensive review of the latest technologies for modifying the surfaces of light alloys to improve their corrosion, wear and tribological properties.Part one discusses surface degradation of light alloys with chapters on corrosion behaviour of magnesium alloys and protection techniques, wear properties of aluminium-based alloys and tribological behaviour of titanium alloys. Part two reviews surface engineering technologies for light alloys including anodising, plasma electrolytic oxidation, thermal spraying, cold spraying, physical vapour deposition, plasma assisted surface treatment, PIII/PSII treatments, laser surface modification, ceramic conversion and duplex treatments. Part three covers applications for surface engineered light alloys including sports equipment, biomedical devices and plasma electrolytic oxidation and anodised aluminium alloys for spacecraft applications.With its distinguished editor and international team of contributors, Surface engineering of light alloys: Aluminium, magnesium and titanium alloys is a standard reference for engineers, metallurgists and materials scientists looking for a comprehensive source of information on surface engineering of aluminium, magnesium and titanium alloys. - Discusses surface degradation of light alloys considering corrosion behaviour and wear and tribological properties - Examines surface engineering technologies and modification featuring plasma electrolytic oxidation treatments and both thermal and cold spraying - Reviews applications for engineered light alloys in sports equipment, biomedical devices and spacecraft
Thoroughly revised and updated, this third edition of lan Polmear’s Light Alloys provides the definitive overview of the metallurgy of aluminum, magnesium and titanium alloys. The emphasis remains on manufacturing processes and application areas, in which there have been significant advances in recent years. The extraction of each metal is considered briefly, followed by its casting characteristics and alloying behavior. Sections on heat treatment properties, fabrication and major applications have been expanded to give more comprehensive coverage of the subjects. Particular attention has been paid to microstructure/property relationships as well as to the role of the individual alloying elements, and new materials and novel processes are reviewed in an additional chapter. This succinct and informative introduction to the physical metallurgy of the light alloys will be essential reading for advanced undergraduates in metallurgy, materials science, manufacturing and mechanical engineering. It will also prove invaluable to metallu## gists and engineers in industry seeking to expand on their knowledge. Other Titles of Interest Steels: Microstructure and Properties Second Edition R W K Honeycombe and H K D H Bhadeshia ISBN 0340589469 Properties of Engineering Materials Second Edition R A Higgins ISBN 0 340 60033 0 Engineering Metallurgy: Applied Physical Metallurgy Sixth Edition R H Higgins ISBN 0 340 56830 5
Lightweight alloys have become of great importance in engineering for construction of transportation equipment. At present, the metals that serve as the base of the principal light alloys are aluminum and magnesium. One of the most important lightweight alloys are the aluminum alloys in use for several applications (structural components wrought aluminum alloys, parts and plates). However, some casting parts that have low cost of production play important role in aircraft parts. Magnesium and its alloys are among the lightest of all metals and the sixth most abundant metal on earth. Magnesium is ductile and the most machinable of all metals. Many of these light weight alloys have appropriately high strength to warrant their use for structural purposes, and as a result of their use, the total weight of transportation equipment has been considerably decreased.
This book addresses methods used in the synthesis of light alloys and composites for industrial applications. It begins with a broad introduction to virtually all aspects of the technology of light alloys and composite materials for aircraft and aerospace applications. The basic theory of fiber and particle reinforcements; light metallic material characteristics and composite systems; components forms, and manufacturing techniques and processes are discussed. The book then progresses to describe the production of alloys and composites by unconventional techniques, such as powder metallurgy, sandwich technique, severe plastic deformation, additive manufacturing, and thermal spray, making it appropriate for researchers in both academia and industry. It will be of special interest to aerospace engineers. Provides a broad introduction to the technology used in manufacturing light alloys and composite materials; Describes the current technologies employed in synthesizing light alloys made from advanced materials; Focuses on unconventional techniques used to produce light alloys and composites in aerospace applications.
Light Alloys Directory and Databook is a world-wide directory of the properties and suppliers of light alloys used in, or proposed for, numerous engineering applications. Alloys covered will include aluminium alloys, magnesium alloys, titanium alloys, beryllium. For the metals considered each section will consist of: a short introduction; a table comparing basic data and a series of comparison sheets. The book will adopt standardised data in order to help the reader in finding and comparing different materials and identifying the required information. All comparison sheets are cross-referenced, so that the user will be able to locate data on a specific product or compare properties easily. The book is designed to complement the existing publications on high performance materials.
An expert exposition of the structural and mechanical properties of light alloys and composites, bridging the gap between scientists and industrial engineers in its consideration of advanced light materials, their structure, properties, technology and application. Includes basic problems of alloy constitution and phase transformations. The aluminium alloys are the main topic of the book, consideration being given to their properties, casting technology, thermomechanical treatment and structure. Attention is also given to the magnesium alloys, particularly those having rare earth metal constituents. Both commercial titanium alloys and intermetallic compounds are discussed, as are metallic composites. The latest engineering techniques are discussed in both theoretical and practical terms.
An expert exposition of the structural and mechanical properties of light alloys and composites, bridging the gap between scientists and industrial engineers in its consideration of advanced light materials, their structure, properties, technology and application. Includes basic problems of alloy constitution and phase transformations. The aluminium alloys are the main topic of the book, consideration being given to their properties, casting technology, thermomechanical treatment and structure. Attention is also given to the magnesium alloys, particularly those having rare earth metal constituents. Both commercial titanium alloys and intermetallic compounds are discussed, as are metallic composites. The latest engineering techniques are discussed in both theoretical and practical terms.
Aluminium, magnesium and titanium are alloys of special interest for engineering applications in a wide range of sectors such as aeronautics, automotive and medical. Their low density, along with sufficient mechanical properties, makes them especially adequate for sectors such as transportation allowing diminishing weight less fuel consumption and emissions to the atmosphere. Nowadays, machining is still one the most important manufacturing processes, not only for metal parts, but also for specially designed hybrid parts for more demanding new applications. A wide range of valuable research has been done on the machining of conventional engineering materials. However, when dealing with light alloys and hybrid materials containing them, they need to face new challenges. Particularly, it is important to analyse the suitability of the machining of these alloys in the current context of Industry 4.0, focusing on the development of cost-effective and sustainable processes. This book is a comprehensive source on the machining of light alloys, presenting a collection of both experimental and review studies. The work is arranged in eight chapters, presented by a group of international scholars, which analyse the main problems related to the machining of these alloys from different perspectives. Key Features A comprehensive state-of-the-art reference source on machining of light alloys Provides research on conventional and non-conventional machining process Offers current research topics on sustainable machining Presents research on the machining of hybrid materials using light alloys Includes applications for Industry 4.0 environments Machining of Light Alloys: Aluminum, Titanium, and Magnesium The aim of the book is to serve as a tool for helping researchers and practitioners to face machining challenges and facilitating the development of new industrial applications for light alloys.
