Lateral Load Resistance of Diaphragms in Prestressed Concrete Girder Bridges

Lateral Load Resistance of Diaphragms in Prestressed Concrete Girder Bridges

Author: R. E. Abendroth

Publisher:

Published: 1991

Total Pages: 214

ISBN-13:

DOWNLOAD EBOOK

Each year several prestressed concrete girder bridges in Iowa and other states are struck and damaged by vehicles with loads too high to pass under the bridge. Whether or not intermediate diaphragms play a significant role in reducing the effect of these unusual loading conditions has often been a topic of discussion. A study of the effects of the type and location of intermediate diaphragms in prestressed concrete girder bridges when the bridge girder flanges were subjected to various levels of vertical and horizontal loading was undertaken. The purpose of the research was to determine whether steel diaphragms of any conventional configuration can provide adequate protection to minimize the damage to prestressed concrete girders caused by lateral loads, similar to the protection provided by the reinforced concrete intermediate diaphragms presently being used by the Iowa Department of Transportation. The research program conducted and described in this report included the following: A comprehensive literature search and survey questionnaire were undertaken to define the state-of-the-art in the use of intermediate diaphragms in prestressed concrete girder bridges. A full scale, simple span, restressed concrete girder bridge model, containing three beams was constructed and tested with several types of intermediate diaphragms located at the one-third points of the span or at the mid-span. Analytical studies involving a three-dimensional finite element analysis model were used to provide additional information on the behavior of the experimental bridge. The performance of the bridge with no intermediate diaphragms was quite different than that with intermediate diaphragms in place. All intermediate diaphragms tested had some effect in distributing the loads to the slab and other girders, although some diaphragm types performed better than others. The research conducted has indicated that the replacement of the reinforced concrete intermediate diaphragms currently being used in Iowa with structural steel diaphragms may be possible.


Structural & Construction Conference

Structural & Construction Conference

Author: Conference Editor

Publisher: CRC Press

Published: 2003-01-01

Total Pages: 936

ISBN-13: 9789058096012

DOWNLOAD EBOOK

Objective of conference is to define knowledge and technologies needed to design and develop project processes and to produce high-quality, competitive, environment- and consumer-friendly structures and constructed facilities. This goal is clearly related to the development and (re)-use of quality materials, to excellence in construction management and to reliable measurement and testing methods.


Masters Theses in the Pure and Applied Sciences

Masters Theses in the Pure and Applied Sciences

Author: Wade H. Shafer

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 427

ISBN-13: 1461303931

DOWNLOAD EBOOK

Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 39 (thesis year 1994) a total of 13,953 thesis titles from 21 Canadian and 159 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 39 reports theses submitted in 1994, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.


Field/laboratory Testing of Damaged Prestressed Concrete Girder Bridges

Field/laboratory Testing of Damaged Prestressed Concrete Girder Bridges

Author:

Publisher:

Published: 1999

Total Pages: 282

ISBN-13:

DOWNLOAD EBOOK

Due to frequent accidental damage to prestressed concrete (P/C) bridges caused by impact from overheight vehicles, a project was initiated to evaluate the strength and load distribution characteristics of damaged P/C bridges. A comprehensive literature review was conducted. It was concluded that only a few references pertain to the assessment and repair of damaged P/C beams. No reference was found that involves testing of a damaged bridge(s) as well as the damaged beams following their removal. Structural testing of 2 damaged bridges was conducted in the field.


Development of Design Specifications and Commentary for Horizontally Curved Concrete Box-girder Bridges

Development of Design Specifications and Commentary for Horizontally Curved Concrete Box-girder Bridges

Author: Nutt, Redfield, and Valentine

Publisher: Transportation Research Board

Published: 2008

Total Pages: 97

ISBN-13: 030911750X

DOWNLOAD EBOOK

This report provides specifications, commentary, and examples for the design of horizontally curved concrete box-girder highway bridges. The report details the development of the design procedures. Recommended Load and Resistance Factor Design (LRFD) specifications and design examples illustrating the application of the design methods and specifications are included in appendixes (available on the TRB website at http://trb.org/news/blurb_detail.asp?id=9596).