Authors have tried to strike a balance between a short book chapter and a very detailed book for subject experts. There were three prime reasons behind doing so: first, the field is quite interdisciplinary and requires simplified presentation for a person from non-parent discipline. Second reason for this short-version of a full book is that both the authors have seen students and technically oriented people, searching for this type of book on wind energy. Third reason and motivation was considering engineers who are starting their career in wind industry. This book is targeted to present a good starting background to such professionals.
Unlike conventional power plants, wind plants emit no air pollutants or greenhouse gases—and wind energy is a free, renewable resource. However, the induction machines commonly used as wind generators have stability problems similar to the transient stability of synchronous machines. To minimize power, frequency, and voltage fluctuations caused by network faults or random wind speed variations, control mechanisms are necessary. Wind Energy Systems: Solutions for Power Quality and Stabilization clearly explains how to solve stability and power quality issues of wind generator systems. Covering fundamental concepts of wind energy conversion systems, the book discusses several means to enhance the transient stability of wind generator systems. It also explains the methodologies for minimizing fluctuations of power, frequency, and voltage. Topics covered include: An overview of wind energy and wind energy conversion systems Fundamentals of electric machines and power electronics Types of wind generator systems Challenges in integrating wind power into electricity grids Solutions for power quality problems Methods for improving transient stability during network faults Methods for minimizing power fluctuations of variable-speed wind generator systems This accessible book helps researchers and engineers understand the relative effectiveness of each method and select a suitable tool for wind generator stabilization. It also offers students an introduction to wind energy conversion systems, providing insights into important grid integration and stability issues.
Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)
Wind Power Generation is a concise, up-to-date and readable guide providing an introduction to one of the leading renewable power generation technologies. It includes detailed descriptions of on and offshore generation systems, and demystifies the relevant wind energy technology functions in practice as well as exploring the economic and environmental risk factors. Engineers, managers, policymakers and those involved in planning and delivering energy resources will find this reference a valuable guide, to help establish a reliable power supply address social and economic objectives. - Focuses on the evolution and developments in wind energy generation - Evaluates the economic and environmental viability of the systems with concise diagrams and accessible explanations
The second edition of the highly acclaimed Wind Power in Power Systems has been thoroughly revised and expanded to reflect the latest challenges associated with increasing wind power penetration levels. Since its first release, practical experiences with high wind power penetration levels have significantly increased. This book presents an overview of the lessons learned in integrating wind power into power systems and provides an outlook of the relevant issues and solutions to allow even higher wind power penetration levels. This includes the development of standard wind turbine simulation models. This extensive update has 23 brand new chapters in cutting-edge areas including offshore wind farms and storage options, performance validation and certification for grid codes, and the provision of reactive power and voltage control from wind power plants. Key features: Offers an international perspective on integrating a high penetration of wind power into the power system, from basic network interconnection to industry deregulation; Outlines the methodology and results of European and North American large-scale grid integration studies; Extensive practical experience from wind power and power system experts and transmission systems operators in Germany, Denmark, Spain, UK, Ireland, USA, China and New Zealand; Presents various wind turbine designs from the electrical perspective and models for their simulation, and discusses industry standards and world-wide grid codes, along with power quality issues; Considers concepts to increase penetration of wind power in power systems, from wind turbine, power plant and power system redesign to smart grid and storage solutions. Carefully edited for a highly coherent structure, this work remains an essential reference for power system engineers, transmission and distribution network operator and planner, wind turbine designers, wind project developers and wind energy consultants dealing with the integration of wind power into the distribution or transmission network. Up-to-date and comprehensive, it is also useful for graduate students, researchers, regulation authorities, and policy makers who work in the area of wind power and need to understand the relevant power system integration issues.
The availability of clean, renewable power is without question going to be the defining challenge and goal of the 21st century, and wind will lead the way. Internationally acclaimed wind energy expert Paul Gipe is as soberly critical of past energy mistakes as he is convincingly optimistic about the future. The overwhelming challenge of transforming our world from one of fossil carbon to one of clean power seems daunting at best—and paralyzingly impractical at worst. Wind Energy Basics offers a solution. Wind power can realistically not only replace the lion’s share of oil-, coal-, and naturalgas– fired electrical plants in the U.S., but also can add enough extra power capacity to allow for most of the cars in the nation to run on electricity. Gipe explains why such a startlingly straightforward solution is eminently doable and can be accomplished much sooner than previously thought—and will have the capacity to resuscitate small and regional economies. Wind Energy Basics offers a how-to for home-based wind applications, with advice on which wind turbines to choose and which to avoid. He guides wind-energy installers through considerations such as renewable investment strategies and gives cautionary tales of wind applications gone wrong. And for the activist, he suggests methods of prodding federal, state, and provincial governments to promote energy independence.
The book presents the latest power conversion and control technology in modern wind energy systems. It has nine chapters, covering technology overview and market survey, electric generators and modeling, power converters and modulation techniques, wind turbine characteristics and configurations, and control schemes for fixed- and variable-speed wind energy systems. The book also provides in-depth steady-state and dynamic analysis of squirrel cage induction generator, doubly fed induction generator, and synchronous generator based wind energy systems. To illustrate the key concepts and help the reader tackle real-world issues, the book contains more than 30 case studies and 100 solved problems in addition to simulations and experiments. The book serves as a comprehensive reference for academic researchers and practicing engineers. It can also be used as a textbook for graduate students and final year undergraduate students.
A highly accessible and authoritative account of wind energy’s scientific background, current technology, and international status, with an emphasis on large turbines and wind farms, both onshore and offshore Topics covered include: a brief history of wind energy the nature of the wind turbine aerodynamics, mechanics, and electrics wind farms offshore opportunities and challenges grid integration of wind energy economic and environmental aspects Whilst intellectually rigorous, this is not an academic treatise. Key equations are fully discussed, providing essential theoretical background. The text is supported by copious illustrations and about 50 inspiring full-colour photographs from around the world. This book is aimed at a wide readership including professionals, policy makers and employees in the energy sector in need of a basic appreciation of the underlying principles of wind energy or a quick update. Its style and level will also appeal to second and third year undergraduate and postgraduate students of renewable and wind energy, energy systems and electrical/electronic engineering. It also gives a concise account of the technology for the large and growing number of people who are interested in onshore and offshore wind farms and the contribution they are making to carbon-free electricity generation in the 21st century.
Wind Energy: An Introduction covers wind energy system types, operation, modeling, analysis, integration, and control. Beginning with a history of the development of wind energy, this comprehensive book:Explains the aerodynamic theories that govern the operation of wind turbinesPresents wind energy statistics to address the stochastic nature of win
This book provides in-depth coverage of the latest research and development activities concerning innovative wind energy technologies intended to replace fossil fuels on an economical basis. A characteristic feature of the various conversion concepts discussed is the use of tethered flying devices to substantially reduce the material consumption per installed unit and to access wind energy at higher altitudes, where the wind is more consistent. The introductory chapter describes the emergence and economic dimension of airborne wind energy. Focusing on “Fundamentals, Modeling & Simulation”, Part I includes six contributions that describe quasi-steady as well as dynamic models and simulations of airborne wind energy systems or individual components. Shifting the spotlight to “Control, Optimization & Flight State Measurement”, Part II combines one chapter on measurement techniques with five chapters on control of kite and ground stations, and two chapters on optimization. Part III on “Concept Design & Analysis” includes three chapters that present and analyze novel harvesting concepts as well as two chapters on system component design. Part IV, which centers on “Implemented Concepts”, presents five chapters on established system concepts and one chapter about a subsystem for automatic launching and landing of kites. In closing, Part V focuses with four chapters on “Technology Deployment” related to market and financing strategies, as well as on regulation and the environment. The book builds on the success of the first volume “Airborne Wind Energy” (Springer, 2013), and offers a self-contained reference guide for researchers, scientists, professionals and students. The respective chapters were contributed by a broad variety of authors: academics, practicing engineers and inventors, all of whom are experts in their respective fields.
