Introduction to Optical Testing
Introduction to Optical Testing

Author: Joseph M. Geary

Publisher: SPIE Press

Published: 1993

Total Pages: 168

ISBN-13: 9780819413772

DOWNLOAD EBOOK

This volume in the SPIE Tutorial Text series presents a practical approach to optical testing, with emphasis on techniques, procedures, and instrumentation rather than mathematical analysis. The author provides the reader with a basic understanding of the measurements made and the tools used to make those measurements. Detailed information is given on how to measure and characterize imaging systems, perform optical bench measurements to determine first- and third-order properties of optical systems, set up and operate a Fizeau interferometer and evaluate fringe data, conduct beam diagnostics (such as wavefront sensing), and perform radiometric calibrations.

Introduction to Optical Metrology
Introduction to Optical Metrology

Author: Rajpal S. Sirohi

Publisher: CRC Press

Published: 2017-07-12

Total Pages: 449

ISBN-13: 1482236117

DOWNLOAD EBOOK

Introduction to Optical Metrology examines the theory and practice of various measurement methodologies utilizing the wave nature of light. The book begins by introducing the subject of optics, and then addresses the propagation of laser beams through free space and optical systems. After explaining how a Gaussian beam propagates, how to set up a collimator to get a collimated beam for experimentation, and how to detect and record optical signals, the text: Discusses interferometry, speckle metrology, moiré phenomenon, photoelasticity, and microscopy Describes the different principles used to measure the refractive indices of solids, liquids, and gases Presents methods for measuring curvature, focal length, angle, thickness, velocity, pressure, and length Details techniques for optical testing as well as for making fiber optic- and MEMS-based measurements Depicts a wave propagating in the positive z-direction by ei(ωt – kz), as opposed to ei(kz – ωt) Featuring exercise problems at the end of each chapter, Introduction to Optical Metrology provides an applied understanding of essential optical measurement concepts, techniques, and procedures.

Optical Specification, Fabrication, and Testing
Optical Specification, Fabrication, and Testing

Author: Jim Schwiegerling

Publisher:

Published: 2014

Total Pages: 216

ISBN-13: 9781628413670

DOWNLOAD EBOOK

This book connects the dots between geometrical optics, interference and diffraction, and aberrations to illustrate the development of an optical system. It focuses on initial layout, design and aberration analysis, fabrication, and, finally, testing and verification of the individual components and the system performance. It also covers more specialized topics such as fitting Zernike polynomials, representing aspheric surfaces with the Forbes Q polynomials, and testing with the Shack-Hartmann wavefront sensor. These topics are discussed in more detail than is found in other textbooks, and the techniques are developed to the point where readers can pursue their own analyses or modify to their particular situations.

Introduction to the Optical Transfer Function
Introduction to the Optical Transfer Function

Author: Charles Sumner Williams

Publisher: SPIE Press

Published: 2002

Total Pages: 436

ISBN-13: 9780819443366

DOWNLOAD EBOOK

This work covers spatial frequency, spread function, wave aberration, and transfer function - and how these concepts are related in an optical system, how they are measured and calculated, and how they may be useful.

Optical Imaging and Aberrations
Optical Imaging and Aberrations

Author: Virendra N. Mahajan

Publisher: SPIE-International Society for Optical Engineering

Published: 2011

Total Pages: 0

ISBN-13: 9780819486998

DOWNLOAD EBOOK

Ten years have passed since the publication of the first edition of this classic text in April 2001. Considerable new material amounting to 100 pages has been added in this second edition. Each chapter now contains a Summary section at the end. The new material in Chapter 4 consists of a detailed comparison of Gaussian apodization with a corresponding beam, determination of the optimum value of the Gaussian radius relative to that of the pupil to yield maximum focal-point irradiance, detailed discussion of standard deviation, aberration balancing, and Strehl ratio for primary aberrations, derivation of the aberration-free and defocused OTF, discussion of an aberrated beam yielding higher axial irradiance in a certain defocused region than its aberration-free focal-point value, illustration that aberrated PSFs lose the advantage of Gaussian apodizaton in reducing the secondary maxima of a PSF, and a brief description of the characterization of the width of a multimode beam. In Chapter 5, the effect of random longitudinal defocus on a PSF is included. The coherence length of atmospheric turbulence is calculated for looking both up and down through the atmosphere. Also discussed are the angle of arrival of a light wave propagating through turbulence, and lucky imaging where better-quality short-exposure images are selected, aligned, and added to obtain a high-quality image.

Optical Shop Testing
Optical Shop Testing

Author: Daniel Malacara

Publisher: John Wiley & Sons

Published: 2007-07-16

Total Pages: 882

ISBN-13: 0471484040

DOWNLOAD EBOOK

The purpose of this third edition is to bring together in a single book descriptions of all tests carried out in the optical shop that are applicable to optical components and systems. This book is intended for the specialist as well as the non-specialist engaged in optical shop testing. There is currently a great deal of research being done in optical engineering. Making this new edition very timely.

Diffractive Optics
Diffractive Optics

Author: Donald C. O'Shea

Publisher: SPIE Press

Published: 2004

Total Pages: 266

ISBN-13: 9780819451712

DOWNLOAD EBOOK

This book provides the reader with the broad range of materials that were discussed in a series of short courses presented at Georgia Tech on the design, fabrication, and testing of diffractive optical elements (DOEs). Although there are not long derivations or detailed methods for specific engineering calculations, the reader should be familiar and comfortable with basic computational techniques. This text is not a 'cookbook' for producing DOEs, but it should provide readers with sufficient information to assess whether this technology would benefit their work, and to understand the requirements for using the concepts and techniques presented by the authors.

Introduction to Optical Microscopy
Introduction to Optical Microscopy

Author: Jerome Mertz

Publisher: Cambridge University Press

Published: 2019-08

Total Pages: 475

ISBN-13: 1108428304

DOWNLOAD EBOOK

Presents a fully updated, self-contained textbook covering the core theory and practice of both classical and modern optical microscopy techniques.

Introduction to Infrared and Electro-Optical Systems, Third Edition
Introduction to Infrared and Electro-Optical Systems, Third Edition

Author: Ronald G. Driggers

Publisher: Artech House

Published: 2022-08-31

Total Pages: 739

ISBN-13: 163081833X

DOWNLOAD EBOOK

This newly revised and updated edition offers a current and complete introduction to the analysis and design of Electro-Optical (EO) imaging systems. The Third Edition provides numerous updates and several new chapters including those covering Pilotage, Infrared Search and Track, and Simplified Target Acquisition Model. The principles and components of the Linear Shift-Invariant (LSI) infrared and electro-optical systems are detailed in full and help you to combine this approach with calculus and domain transformations to achieve a successful imaging system analysis. Ultimately, the steps described in this book lead to results in quantitative characterizations of performance metrics such as modulation transfer functions, minimum resolvable temperature difference, minimum resolvable contrast, and probability of object discrimination. The book includes an introduction to two-dimensional functions and mathematics which can be used to describe image transfer characteristics and imaging system components. You also learn diffraction concepts of coherent and incoherent imaging systems which show you the fundamental limits of their performance. By using the evaluation procedures contained in this desktop reference, you become capable of predicting both sensor test and field performance and quantifying the effects of component variations. The book contains over 800 time-saving equations and includes numerous analyses and designs throughout. It also includes a reference link to special website prepared by the authors that augments the book in the classroom and serves as an additional resource for practicing engineers. With its comprehensive coverage and practical approach, this is a strong resource for engineers needing a bench reference for sensor and basic scenario performance calculations. Numerous analyses and designs are given throughout the text. It is also an excellent text for upper-level students with an interest in electronic imaging systems.

Photodetection and Measurement
Photodetection and Measurement

Author: Mark Johnson

Publisher: McGraw Hill Professional

Published: 2003-07-22

Total Pages: 316

ISBN-13: 0071433481

DOWNLOAD EBOOK

MAKE OPTICAL MEASUREMENTS WITH MAXIMUM ACCURACY AND MINIMUM COST The "opto-electronics revolution" has made the art and science of making sensitive, accurate, and inexpensive optical measurements must-know information for legions of electronic engineers and research students. And there’s no faster or easier way to master photodetection and measurement techniques than with this hands-on tutorial written by a teacher with experience enough to know the questions you would ask. A clear, easy-to-understand "rules-of-thumb" approach shows you how to make high-performance optical measurements by getting the fundamentals right, often with simple, inexpensive equipment commonly found in laboratories. It includes treatment of: * Photodetectors * Amplifiers * LED sources * Electronic modulation and demodulation * Interference avoidance * Data acquisition and basic DSP You’ll also gain a firm understanding of noise-reduction techniques and the essentials of building-in speed, sensitivity,and stability. If you want to learn the secret of making sound optical measurements without expensive equipment, this is the one resource you shouldn’t work without.