"Introduction to Embedded System Design Using Field Programmable Gate Arrays" provides a starting point for the use of field programmable gate arrays in the design of embedded systems. The text considers a hypothetical robot controller as an embedded application and weaves around it related concepts of FPGA-based digital design. The book details: use of FPGA vis-à-vis general purpose processor and microcontroller; design using Verilog hardware description language; digital design synthesis using Verilog and Xilinx® SpartanTM 3 FPGA; FPGA-based embedded processors and peripherals; overview of serial data communications and signal conditioning using FPGA; FPGA-based motor drive controllers; and prototyping digital systems using FPGA. The book is a good introductory text for FPGA-based design for both students and digital systems designers. Its end-of-chapter exercises and frequent use of example can be used for teaching or for self-study.
This book presents the methodologies and for embedded systems design, using field programmable gate array (FPGA) devices, for the most modern applications. Coverage includes state-of-the-art research from academia and industry on a wide range of topics, including applications, advanced electronic design automation (EDA), novel system architectures, embedded processors, arithmetic, and dynamic reconfiguration.
Embedded Design Using Programmable Gate Arrays Dennis Silage This text describes modern embedded processing systems using the Field Programmable Gate Array. This new paradigm in embedded design utilizes the Verilog Hardware Description Language behavioral synthesis of controller and datapath constructs and the Finite State Machine for Digital Signal Processing, communications and control with the FPGA, external hard core peripherals, custom internal soft core peripherals and the soft core processor. Review materials and references for DSP place the embedded design projects in perspective. This text features the Xilinx Spartan-3E Starter Board, the Xilinx ISE WebPACK EDA, Xilinx LogiCORE blocks and the Xilinx PicoBlaze soft core processor. Embedded Design Using Programmable Gate Arrays is intended as a supplementary text and laboratory manual for undergraduate students in a contemporary course in digital logic and embedded systems. Professionals who have not had an exposure to the fine grained FPGA, the Verilog HDL, an EDA software tool or the new paradigm of the controller and datapath and the FSM will find that this text and the Xilinx Spartan-3E Starter Board provides the necessary experience in this emerging area of electrotechnology.
Embedded Systems Design with Platform FPGAs introduces professional engineers and students alike to system development using Platform FPGAs. The focus is on embedded systems but it also serves as a general guide to building custom computing systems. The text describes the fundamental technology in terms of hardware, software, and a set of principles to guide the development of Platform FPGA systems. The goal is to show how to systematically and creatively apply these principles to the construction of application-specific embedded system architectures. There is a strong focus on using free and open source software to increase productivity. Each chapter is organized into two parts. The white pages describe concepts, principles, and general knowledge. The gray pages provide a technical rendition of the main issues of the chapter and show the concepts applied in practice. This includes step-by-step details for a specific development board and tool chain so that the reader can carry out the same steps on their own. Rather than try to demonstrate the concepts on a broad set of tools and boards, the text uses a single set of tools (Xilinx Platform Studio, Linux, and GNU) throughout and uses a single developer board (Xilinx ML-510) for the examples. - Explains how to use the Platform FPGA to meet complex design requirements and improve product performance - Presents both fundamental concepts together with pragmatic, step-by-step instructions for building a system on a Platform FPGA - Includes detailed case studies, extended real-world examples, and lab exercises
Focusing on resource awareness in field-programmable gate array (FPGA) design, Applications of Field-Programmable Gate Arrays in Scientific Research covers the principle of FPGAs and their functionality. It explores a host of applications, ranging from small one-chip laboratory systems to large-scale applications in "big science." The book first de
Field Programmable Gate Arrays (FPGAs) are devices that provide a fast, low-cost way for embedded system designers to customize products and deliver new versions with upgraded features, because they can handle very complicated functions, and be reconfigured an infinite number of times. In addition to introducing the various architectural features available in the latest generation of FPGAs, The Design Warrior's Guide to FPGAs also covers different design tools and flows.This book covers information ranging from schematic-driven entry, through traditional HDL/RTL-based simulation and logic synthesis, all the way up to the current state-of-the-art in pure C/C++ design capture and synthesis technology. Also discussed are specialist areas such as mixed hardward/software and DSP-based design flows, along with innovative new devices such as field programmable node arrays (FPNAs). Clive "Max" Maxfield is a bestselling author and engineer with a large following in the electronic design automation (EDA)and embedded systems industry. In this comprehensive book, he covers all the issues of interest to designers working with, or contemplating a move to, FPGAs in their product designs. While other books cover fragments of FPGA technology or applications this is the first to focus exclusively and comprehensively on FPGA use for embedded systems. - First book to focus exclusively and comprehensively on FPGA use in embedded designs - World-renowned best-selling author - Will help engineers get familiar and succeed with this new technology by providing much-needed advice on choosing the right FPGA for any design project
This book introduces a modern approach to embedded system design, presenting software design and hardware design in a unified manner. It covers trends and challenges, introduces the design and use of single-purpose processors ("hardware") and general-purpose processors ("software"), describes memories and buses, illustrates hardware/software tradeoffs using a digital camera example, and discusses advanced computation models, controls systems, chip technologies, and modern design tools. For courses found in EE, CS and other engineering departments.
• • Learn the 'whys and hows' of digital system design with FPGAs from this thorough treatment. • Up-to-date information and comparison of different modern FPGA devices. • IEEE Fellow Wayne Wolf brings all related aspects of VLSI to FPGA system design in this thorough introduction.
Explore the complete process of developing systems based on field-programmable gate arrays (FPGAs), including the design of electronic circuits and the construction and debugging of prototype embedded devices Key FeaturesLearn the basics of embedded systems and real-time operating systemsUnderstand how FPGAs implement processing algorithms in hardwareDesign, construct, and debug custom digital systems from scratch using KiCadBook Description Modern digital devices used in homes, cars, and wearables contain highly sophisticated computing capabilities composed of embedded systems that generate, receive, and process digital data streams at rates up to multiple gigabits per second. This book will show you how to use Field Programmable Gate Arrays (FPGAs) and high-speed digital circuit design to create your own cutting-edge digital systems. Architecting High-Performance Embedded Systems takes you through the fundamental concepts of embedded systems, including real-time operation and the Internet of Things (IoT), and the architecture and capabilities of the latest generation of FPGAs. Using powerful free tools for FPGA design and electronic circuit design, you'll learn how to design, build, test, and debug high-performance FPGA-based IoT devices. The book will also help you get up to speed with embedded system design, circuit design, hardware construction, firmware development, and debugging to produce a high-performance embedded device – a network-based digital oscilloscope. You'll explore techniques such as designing four-layer printed circuit boards with high-speed differential signal pairs and assembling the board using surface-mount components. By the end of the book, you'll have a solid understanding of the concepts underlying embedded systems and FPGAs and will be able to design and construct your own sophisticated digital devices. What you will learnUnderstand the fundamentals of real-time embedded systems and sensorsDiscover the capabilities of FPGAs and how to use FPGA development toolsLearn the principles of digital circuit design and PCB layout with KiCadConstruct high-speed circuit board prototypes at low costDesign and develop high-performance algorithms for FPGAsDevelop robust, reliable, and efficient firmware in CThoroughly test and debug embedded device hardware and firmwareWho this book is for This book is for software developers, IoT engineers, and anyone who wants to understand the process of developing high-performance embedded systems. You'll also find this book useful if you want to learn about the fundamentals of FPGA development and all aspects of firmware development in C and C++. Familiarity with the C language, digital circuits, and electronic soldering is necessary to get started.
Dr Donald Bailey starts with introductory material considering the problem of embedded image processing, and how some of the issues may be solved using parallel hardware solutions. Field programmable gate arrays (FPGAs) are introduced as a technology that provides flexible, fine-grained hardware that can readily exploit parallelism within many image processing algorithms. A brief review of FPGA programming languages provides the link between a software mindset normally associated with image processing algorithms, and the hardware mindset required for efficient utilization of a parallel hardware design. The design process for implementing an image processing algorithm on an FPGA is compared with that for a conventional software implementation, with the key differences highlighted. Particular attention is given to the techniques for mapping an algorithm onto an FPGA implementation, considering timing, memory bandwidth and resource constraints, and efficient hardware computational techniques. Extensive coverage is given of a range of low and intermediate level image processing operations, discussing efficient implementations and how these may vary according to the application. The techniques are illustrated with several example applications or case studies from projects or applications he has been involved with. Issues such as interfacing between the FPGA and peripheral devices are covered briefly, as is designing the system in such a way that it can be more readily debugged and tuned. Provides a bridge between algorithms and hardware Demonstrates how to avoid many of the potential pitfalls Offers practical recommendations and solutions Illustrates several real-world applications and case studies Allows those with software backgrounds to understand efficient hardware implementation Design for Embedded Image Processing on FPGAs is ideal for researchers and engineers in the vision or image processing industry, who are looking at smart sensors, machine vision, and robotic vision, as well as FPGA developers and application engineers. The book can also be used by graduate students studying imaging systems, computer engineering, digital design, circuit design, or computer science. It can also be used as supplementary text for courses in advanced digital design, algorithm and hardware implementation, and digital signal processing and applications. Companion website for the book: www.wiley.com/go/bailey/fpga
