PHM Society established International Journal of Prognostics and Health Management (IJPHM) in 2009 to facilitate archival publication of peer-reviewed results from research and development in the area of PHM. As a journal solely dedicated to the emerging field of PHM IJPHM is the first of its kind and has been a focal point for dissemination of peer-reviewed PHM knowledge. While for the first few years the journal maintained only an online presence, the printed volumes will now be available and can be obtained upon request.
PHM Society established International Journal of Prognostics and Health Management (IJPHM) in 2009 to facilitate archival publication of peer-reviewed results from research and development in the area of PHM. As a journal solely dedicated to the emerging field of PHM IJPHM is the first of its kind and has been a focal point for dissemination of peer-reviewed PHM knowledge. While for the first few years the journal maintained only an online presence, the printed volumes will now be available and can be obtained upon request. The first IJPHM volume came out in 2010 with three research papers that discussed the key issue of PHM performance that is still relevant to the maturing field of PHM.
International Journal of Prognostics and Health Management (IJPHM) was established in 2009 to facilitate archival publication of peer-reviewed results from research and development in the area of PHM. As a journal solely dedicated to the emerging field of PHM IJPHM is the first of its kind and has been a focal point for dissemination of peer-reviewed PHM knowledge. While for the first few years the journal maintained only an online presence, the printed volumes will now be available and can be obtained upon request. IJPHM is dedicated to all aspects of PHM: technical, management, economic, and social. In addition to regular periodic volumes IJPHM also publishes special issues with quality papers dedicated to focused topics.
IJPHM Special issue on Wind Turbine PHM is the first special issue that discusses the state-of-the-art in PHM of wind turbine systems. This Special Issue contains 14 excellent papers that highlight a wide range of current research and application topics related to wind turbine PHM. Fault diagnostics is an important aspect of wind turbine PHM. Eight papers included in this special issue deal with fault diagnostics of different parts of a wind turbine. Each of these papers presents different fault diagnostic techniques and sensing technologies.
This book introduces the methods for predicting the future behavior of a system’s health and the remaining useful life to determine an appropriate maintenance schedule. The authors introduce the history, industrial applications, algorithms, and benefits and challenges of PHM (Prognostics and Health Management) to help readers understand this highly interdisciplinary engineering approach that incorporates sensing technologies, physics of failure, machine learning, modern statistics, and reliability engineering. It is ideal for beginners because it introduces various prognostics algorithms and explains their attributes, pros and cons in terms of model definition, model parameter estimation, and ability to handle noise and bias in data, allowing readers to select the appropriate methods for their fields of application.Among the many topics discussed in-depth are:• Prognostics tutorials using least-squares• Bayesian inference and parameter estimation• Physics-based prognostics algorithms including nonlinear least squares, Bayesian method, and particle filter• Data-driven prognostics algorithms including Gaussian process regression and neural network• Comparison of different prognostics algorithms divThe authors also present several applications of prognostics in practical engineering systems, including wear in a revolute joint, fatigue crack growth in a panel, prognostics using accelerated life test data, fatigue damage in bearings, and more. Prognostics tutorials with a Matlab code using simple examples are provided, along with a companion website that presents Matlab programs for different algorithms as well as measurement data. Each chapter contains a comprehensive set of exercise problems, some of which require Matlab programs, making this an ideal book for graduate students in mechanical, civil, aerospace, electrical, and industrial engineering and engineering mechanics, as well as researchers and maintenance engineers in the above fields.
The safe management of the complex distributed systems and critical infrastructures which constitute the backbone of modern industry and society entails identifying and quantifying their vulnerabilities to design adequate protection, mitigation, and emergency action against failure. In practice, there is no fail-safe solution to such problems and various frameworks are being proposed to effectively integrate different methods of complex systems analysis in a problem-driven approach to their solution. Vulnerable Systems reflects the current state of knowledge on the procedures which are being put forward for the risk and vulnerability analysis of critical infrastructures. Classical methods of reliability and risk analysis, as well as new paradigms based on network and systems theory, including simulation, are considered in a dynamic and holistic way. Readers of Vulnerable Systems will benefit from its structured presentation of the current knowledge base on this subject. It will enable graduate students, researchers and safety and risk analysts to understand the methods suitable for different phases of analysis and to identify their criticalities in application.
This book addresses the steps needed to monitor health assessment systems and the anticipation of their failures: choice and location of sensors, data acquisition and processing, health assessment and prediction of the duration of residual useful life. The digital revolution and mechatronics foreshadowed the advent of the 4.0 industry where equipment has the ability to communicate. The ubiquity of sensors (300,000 sensors in the new generations of aircraft) produces a flood of data requiring us to give meaning to information and leads to the need for efficient processing and a relevant interpretation. The process of traceability and capitalization of data is a key element in the context of the evolution of the maintenance towards predictive strategies.
Industrial revolutions have impacted both, manufacturing and service. From the steam engine to digital automated production, the industrial revolutions have conduced significant changes in operations and supply chain management (SCM) processes. Swift changes in manufacturing and service systems have led to phenomenal improvements in productivity. The fast-paced environment brings new challenges and opportunities for the companies that are associated with the adaptation to the new concepts such as Internet of Things (IoT) and Cyber Physical Systems, artificial intelligence (AI), robotics, cyber security, data analytics, block chain and cloud technology. These emerging technologies facilitated and expedited the birth of Logistics 4.0. Industrial Revolution 4.0 initiatives in SCM has attracted stakeholders’ attentions due to it is ability to empower using a set of technologies together that helps to execute more efficient production and distribution systems. This initiative has been called Logistics 4.0 of the fourth Industrial Revolution in SCM due to its high potential. Connecting entities, machines, physical items and enterprise resources to each other by using sensors, devices and the internet along the supply chains are the main attributes of Logistics 4.0. IoT enables customers to make more suitable and valuable decisions due to the data-driven structure of the Industry 4.0 paradigm. Besides that, the system’s ability of gathering and analyzing information about the environment at any given time and adapting itself to the rapid changes add significant value to the SCM processes. In this peer-reviewed book, experts from all over the world, in the field present a conceptual framework for Logistics 4.0 and provide examples for usage of Industry 4.0 tools in SCM. This book is a work that will be beneficial for both practitioners and students and academicians, as it covers the theoretical framework, on the one hand, and includes examples of practice and real world.
The third volume in the Integrated Vehicle Health Management (IVHM) series focuses on the technology that actually supports the implementation of IVHM in real-life situations. Edited by Ian K. Jennions, Director of the IVHM Center at Cranfield University, UK, this book was written collaboratively by twenty-seven authors from industry, academia and governmental research agencies. Topics include: -Sensors, instrumentation and signal processing -Fault detection and diagnostics -Prognostics and metrics -Architecture -Data Management -Vehicle level reasoning systems -System's design -Applications and disruptive technologies Integrated Vehicle Heath Management: The Technology follows two bestsellers, also published by SAE International, which cover the fundamentals aspects of this new body of knowledge (Integrated Vehicle Health Management: Perspectives on an Emerging Field), and the business justification needed so that investments in the technology make sense (Integrated Vehicle Health Management: Business Case Theory and Practice).
