This comprehensive reference for engineers, consultants, and public administration officials is recognized as the most complete, practical guide to water pipe corrosion, its health effects, and how to control it.
This comprehensive reference for engineers, consultants, and public administration officials is recognized as the most complete, practical guide to water pipe corrosion, its health effects, and how to control it.
This AWWA manual of practice provides information on the factors that influence pipe corrosion, assessing corrosion-related impacts, water quality and implementation, and maintenance of an effective corrosion control program.
Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.
Updated throughout for this new edition, Water Distribution System Monitoring describes the latest water quality monitoring approaches, techniques, and equipment that will assist water utilities for compliance with the "Lead and Copper Rule" as well as address numerous other water quality issues. Water quality data are obtained using the appro
The researchers warn that their findings may not apply in every situation, and that much more research needs to be done. They inquire into such questions as whether polyphosphate reversion is likely to be significant in water distribution systems, how important particulate lead and copper corrosion
Part of Metals and Related Substances in Drinking Water Set - buy all five books together to save over 30%! This Code of Practice is concerned with metal pick-up by drinking water within the water supply chain, particularly from water mains and from domestic and institutional pipe-work systems. The principal metals of interest are copper, iron, and lead, and to a lesser extent nickel and zinc. The emphasis is on cold drinking water at its point of use by consumers. Metals arising from water sources and hot water systems are not considered. The intention is that this Code of Practice establishes an international standard for the control of internal corrosion of water supply systems. It provides a basis for identifying both problems and sustainable solutions in a manner which is sound scientifically and will help operators to achieve due diligence. It provides a template for improving internal corrosion control in countries, cities or towns where this has been neglected or poorly implemented. Internal Corrosion Control of Water Supply Systems is deliberately brief in its presentation of a wide array of complex information, in order to provide direction to practitioners that can be more easily related to their specific circumstances. The book also provides a series of check-lists and criteria to be used in risk assessment. Editor: Dr Colin R Hayes, University of Swansea, UK, Chair of IWA Specialist Group on Metals and Related Substances in Drinking Water.
Water Supply has been the most comprehensive guide to the design, construction and operation of water supply systems for more than 40 years. The combined experience of its authors make it an unparalleled resource for professionals and students alike. This new sixth edition has been fully updated to reflect the latest WHO, European, UK and US standards, including the European Water Framework Directive. The structure of the book has been changed to give increased emphasis to environmental aspects of water supply, in particular the critical issue of waste reduction and conservation of supplies. Written for both the professionals and students, this book is essential reading for anyone working in water engineering. - Comprehensive coverage of all aspects of public water supply and treatment - Details of US, European and WHO standards and practice - Based on decades of practical professional experience