This highly informative and carefully presented book covers the most recent advances as well as comprehensive reviews addressing novel and state-of-the-art topics from active researchers in innovative advanced materials and hybrid materials, concerning not only their synthesis, preparation, and characterization but especially focusing on the applications of such materials with outstanding performance.
Advanced materials for energy and environmental applications (such as rapid heating, anti-fouling/anti-virus surface, chemical sensor, textile/stretchable sensor, fuel cell, and lithium-ion batteries) have been extensively investigated in the academic and industrial fields. The advent of cabon-based nano-materials (carbon nanotubes, graphene, and carbon black) and inonganic nano-materials (Ag wire/particles, Cu mesh, and transition metal dichalcogenide) has accelerated research interest in energy and environmental applications. This book is focused on the emerging concept and improvement of energy and environmental basic research, as well as in the characterization and analysis of novel energy and environmental base materials. The contents of the book are as below: - Theoretical and experimental studies on advanced conducting nanocomposites; - Electrical properties of nanocomposites under various conditions (dynamic mode, aspect ratio, alignment, and contents) and its applications; - Advanced material for energy applications; - Analysis and materials for environmental applications.
In the realm of human innovation, few pursuits have captured our imagination quite like the quest for fusion power. It is a journey marked by scientific curiosity, technological ingenuity, and the aspiration for a sustainable energy future. From the intricacies of plasma physics to the engineering marvels of containment vessels, the pursuit of fusion has spurred collaboration across disciplines and nations, offering tantalizing promises of clean, abundant energy. This book seeks to unravel the complexities surrounding fusion power, providing a comprehensive overview of its science, technology, and potential impact on our world. It delves into the fundamental principles that govern fusion reactions, explores the various approaches to achieving controlled fusion, and examines the challenges that lie ahead on the path to practical fusion energy. While the concept of fusion has been studied for decades, recent advancements in fusion research have brought us closer than ever to realizing its potential. Breakthroughs in materials science, computational modeling, and fusion reactor design have reignited optimism within the scientific community and sparked renewed interest from policymakers and industry leaders. However, the road to fusion energy is not without obstacles. Technical hurdles, funding constraints, and public perception issues pose formidable barriers to overcome. Yet, with perseverance and innovation, the dream of harnessing the power of the stars in a controlled manner is within reach. As we stand on the brink of a new era in energy production, it is imperative that we confront the challenges of our time with resolve and determination. Fusion power represents a beacon of hope in our quest for a sustainable future, offering the promise of clean, reliable energy for generations to come. This book serves as a testament to the remarkable progress made in the field of fusion research and a call to action for continued investment and collaboration. By exploring the science, technology, and potential of fusion power, we hope to inspire readers to join us on this transformative journey towards a brighter tomorrow. Welcome to the fusion revolution.
Innovation in Nano-polysaccharides for Eco-sustainability: From Science to Industrial Applications presents fundamentals, advanced preparation methods, and novel applications for polysaccharide-based nanomaterials. Sections cover the fundamental aspects of polysaccharides and nano-polysaccharides, including their structure and properties, surface modification, processing and characterization. Key considerations are explained in detail, including the connection between the substituents of polysaccharides and their resulting physical properties, renewable resources, their sustainable utilization, and specific high value applications, such as pharmaceuticals, photocatalysts, energy, and wastewater treatment, and more. This is a valuable resource for researchers, scientists, and advanced students across bio-based polymers, nanomaterials, polymer chemistry, sustainable materials, biology, materials science and engineering, and chemical engineering. In industry, this book will support scientists, R&D, and engineers looking to utilize bio-based materials in advanced industrial applications. - Covers the fundamentals, mechanisms, preparation methods, unique properties and performance of nano-polysaccharide materials - Explores sustainable applications of nano-polysaccharides in areas such as pharmaceuticals, energy and wastewater treatment - Addresses key challenges, including the implementation of sustainable concepts in chemical design and paths to scalability and commercialization
This compendium reports fundamental science and engineering advances of the US Army Research Labratory (ARL) within the area of Energy and Power technologies. Although, in general, ARL's Materials Research encompasses a broad range of materials technologies (e.g.: Photonics, Electronics, Biological and Bio-inspired Materials, Structural Materials, High Strain and Ballistic Materials, and Manufacturing Science), this publication specifically addresses selected energy and power material related work at ARL. While this work includes electrochemical energy storage (batteries and capacitors) and electrochemical energy conversion (fuel cells, photoelectrochemistry, and photochemistry), special emphasis is given on electrochemical energy storage: • Micro Electro-Mechanical Systems (MEMS): Power density, efficiency, and robustness of motors, generators, and actuators while also reducing their life cycle costs. • Energy Storage: Electrical and electrochemical energy storage devices to decrease device size, weight, and cost as well as increase their capabilities in extreme temperatures and operating conditions. • Power Control and Distribution: Tactical, deployable power systems using conventional fuels, alternative fuels, and energy harvested from renewable/ambient sources. • Power Generation/Energy Conversion: Smart energy networks for platforms, forward operating bases, and facilities using modeling and simulation tools as well as new, greater capability and efficiency components. • Thermal Transport and Control: Heat and higher power density systems, advanced components, system modeling, and adaptive or hybrid-cycle technologies. Keywords: Electrochemical Energy Storage, Batteries, Capacitors, Electrochemical Energy Conversion, Fuel Cells, Photoelectrochemistry, Photochemistry, High Voltage Electrolytes, Li-ion Batteries, Li-ion Chemistry, Lithium–Sulphur Batteries, Nuclear Metastables, Pyroelectric Energy Conversion, Charged Quantum Dots, High-Efficiency Photovoltaics, IR Sensing, GaN Power Schottky Diodes, Threshold-Voltage Instability, Reliability Testing, SiC MOSFETs, Power Electronics Packaging, High Voltage 4H-SiC GTOs, Silicon Carbide, Avalanche Breakdown Diode, SiC PiN Diodes, Thyristor Protection, Compact DC-DC Battery Chargers
Chapters Chapter 1: Reimagining Integrated Circuits: Designing for Tomorrow's Demands Chapter 2: Advancements in Communication Systems: Connecting the Unconnected Chapter 3: The Rise of Artificial Intelligence: From Hardware to Intelligent Systems
This book provides a comprehensive introduction to the current status and future trends of materials and component design for fifth-generation (5G) wireless communications and beyond. Necessitated by rapidly increasing numbers of mobile devices and data volumes, and acting as a driving force for innovation in information technology, 5G networks are broadly characterized by ubiquitous connectivity, extremely low latency, and very high-speed data transfer. Such capabilities are facilitated by nanoscale and massive multi-input multi-output (MIMO) with extreme base station and device densities, as well as unprecedented numbers of antennas. This book covers semiconductor solutions for 5G electronics, design and performance enhancement for 5G antennas, high frequency PCB materials and design requirements, materials for high frequency filters, EMI shielding materials and absorbers for 5G systems, thermal management materials and components, and protective packaging and sealing materials for 5G devices. It explores fundamental physics, design, and engineering aspects, as well as the full array of state-of-the-art applications of 5G-and-beyond wireless communications. Future challenges and potential trends of 5G-and-beyond applications and related materials technologies are also addressed. Throughout this book, illustrations clarify core concepts, techniques, and processes. At the end of each chapter, references serve as a gateway to the primary literature in the field. This book is essential reading for today’s students, scientists, engineers and professionals who want to understand the current status and future trends in materials advancement and component design in 5G and beyond, and acquire skills for selecting and using materials and 5G component design that takes economic and regulatory aspects into account.
Innovations in Materials Chemistry, Physics, and Engineering Research is an all-encompassing book edited by Eugene de Silva, the Head of Multi-disciplinary Research in Applied Science (MRAS), and Pramudi Abeydeera, a prominent figure in polymer chemistry. The book explores the latest research and innovations in materials chemistry, physics, engineering, and other related areas. It seeks to inform researchers, policymakers, and the wider public about the most recent theoretical and experimental research in the field. The book covers many topics, including the fundamental mechanisms of reactions, applications, synthesis, properties, and innovations in materials chemistry. It also contains critical reviews of past and current research, which provides the reader with a comprehensive understanding of the subject matter. By doing so, the book promotes collaborative research by facilitating the sharing of information and directing research toward new avenues in research and industrial development. It is an indispensable resource for universities, colleges, research centers, and industries. This book is particularly relevant for polymer scientists who find the latest research on materials chemistry, physics, engineering, and allied fields beneficial for their research endeavors.
Engineer Travel: A Mechanical Engineer's Guide to World Travel bridges the gap between mechanical engineering and global exploration, offering a unique perspective on how engineering principles shape our travel experiences. This engaging book delves into transportation systems, architectural wonders, and sustainable tourism infrastructure, revealing the intricate mechanics behind modern travel and inspiring innovative approaches to journeys. The book progresses logically, introducing fundamental concepts before exploring their applications in real-world scenarios. It examines high-speed trains and aircraft, analyzes iconic structures worldwide, and culminates in a discussion of cutting-edge sustainable tourism solutions. By combining technical analysis with cultural and historical insights, the author provides a holistic view of each engineering marvel, making complex concepts accessible to a general audience while maintaining depth for those with technical backgrounds. What sets Engineer Travel apart is its innovative blend of engineering knowledge and practical travel advice, offering readers a fresh lens through which to view popular destinations. It encourages a deeper appreciation for the engineering feats that enable global exploration, while addressing crucial debates about balancing technological advancement with environmental preservation in tourism development. This approach makes Engineer Travel a valuable resource for engineering students, travel enthusiasts, and tourism professionals alike.
