Induced Seismicity Potential in Energy Technologies
Induced Seismicity Potential in Energy Technologies

Author: National Research Council

Publisher: National Academies Press

Published: 2013-08-14

Total Pages: 238

ISBN-13: 0309253705

DOWNLOAD EBOOK

In the past several years, some energy technologies that inject or extract fluid from the Earth, such as oil and gas development and geothermal energy development, have been found or suspected to cause seismic events, drawing heightened public attention. Although only a very small fraction of injection and extraction activities among the hundreds of thousands of energy development sites in the United States have induced seismicity at levels noticeable to the public, understanding the potential for inducing felt seismic events and for limiting their occurrence and impacts is desirable for state and federal agencies, industry, and the public at large. To better understand, limit, and respond to induced seismic events, work is needed to build robust prediction models, to assess potential hazards, and to help relevant agencies coordinate to address them. Induced Seismicity Potential in Energy Technologies identifies gaps in knowledge and research needed to advance the understanding of induced seismicity; identify gaps in induced seismic hazard assessment methodologies and the research to close those gaps; and assess options for steps toward best practices with regard to energy development and induced seismicity potential.

Well Completion Design
Well Completion Design

Author: Jonathan Bellarby

Publisher: Elsevier

Published: 2009-04-13

Total Pages: 726

ISBN-13: 0080932525

DOWNLOAD EBOOK

Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. - Course book based on course well completion design by TRACS International - Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world - Full colour

Applied Well Cementing Engineering
Applied Well Cementing Engineering

Author: Gefei Liu

Publisher: Gulf Professional Publishing

Published: 2021-03-25

Total Pages: 640

ISBN-13: 0128219483

DOWNLOAD EBOOK

Applied Well Cementing Engineering delivers the latest technologies, case studies, and procedures to identify the challenges, understand the framework, and implement the solutions for today's cementing and petroleum engineers. Covering the basics and advances, this contributed reference gives the complete design, flow and job execution in a structured process. Authors, collectively, bring together knowledge from over 250 years of experience in cementing and condense their knowledge into this book. Real-life successful and unsuccessful case studies are included to explain lessons learned about the technologies used today. Other topics include job simulation, displacement efficiency, and hydraulics. A practical guide for cementing engineer, Applied Well Cementing Engineering, gives a critical reference for better job execution. - Provides a practical guide and industry best practices for both new and seasoned engineers - Independent chapters enable the readers to quickly access specific subjects - Gain a complete framework of a cementing job with a detailed road map from casing equipment to plug and abandonment

Underground Injection Science and Technology
Underground Injection Science and Technology

Author: C-F. Tsang

Publisher: Elsevier

Published: 2005-12-28

Total Pages: 731

ISBN-13: 0080457908

DOWNLOAD EBOOK

Chapters by a distinguished group of international authors on various aspects of Underground Injection Science and Technology are organized into seven sections addressing specific topics of interest. In the first section the chapters focus on the history of deep underground injection as well regulatory issues, future trends and risk analysis. The next section contains ten chapters dealing with well testing and hydrologic modeling. Section 3, consisting of five chapters, addresses various aspects of the chemical processes affecting the fate of the waste in the subsurface environment. Consideration is given here to reactions between the waste and the geologic medium, and reactions that take place within the waste stream itself. The remaining four sections deal with experience relating to injection of, respectively, liquid wastes, liquid radioactive wastes in Russia, slurried solids, and compressed carbon dioxide. Chapters in Section 4, cover a diverse range of other issues concerning the injection of liquid wastes including two that deal with induced seismicity. In Section 5, Russian scientists have contributed several chapters revealing their knowledge and experience of the deep injection disposal of high-level radioactive liquid processing waste. Section 6 consists of five chapters that cover the technology surrounding the injection disposal of waste slurries. Among the materials considered are drilling wastes, bone meal, and biosolids. Finally, four chapters in Section 7 deal with questions relating to carbon dioxide sequestration in deep sedimentary aquifers. This subject is particularly topical as nations grapple with the problem of controlling the buildup of carbon dioxide in the atmosphere.* Comprehensive coverage of the state of the art in underground injection science and technology* Emerging subsurface waste disposal technologies* International scope

Introduction to Permanent Plug and Abandonment of Wells
Introduction to Permanent Plug and Abandonment of Wells

Author: Mahmoud Khalifeh

Publisher: Springer Nature

Published: 2020-01-27

Total Pages: 285

ISBN-13: 3030399702

DOWNLOAD EBOOK

This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.

Advanced Well Completion Engineering
Advanced Well Completion Engineering

Author: Renpu Wan

Publisher: Gulf Professional Publishing

Published: 2011-08-23

Total Pages: 737

ISBN-13: 0123858690

DOWNLOAD EBOOK

Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. - One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. - Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. - Matchless in-depth technical advice for achieving operational excellence with advance solutions.

Modern Well Design
Modern Well Design

Author: Bernt S. Aadnoy

Publisher: CRC Press

Published: 2010-09-15

Total Pages: 311

ISBN-13: 0203836138

DOWNLOAD EBOOK

Modern Well Design - Second Edition presents a unified approach to the well design process and drilling operations. Following an introduction to the field, the second chapter addresses drilling fluids, as well as optimal mud weight, hole cleaning, hydraulic optimization, and methods to handle circulation losses. A relatively large chapter on geomec