This book provides readers with up-to-date coverage of fault location algorithms in transmission and distribution networks. The algorithms will help readers track down the exact location of a fault in the shortest possible time. Furthermore, voltage and current waveforms recorded by digital relays, digital fault recorders, and other intelligent electronic devices contain a wealth of information. Knowledge gained from analysing the fault data can help system operators understand what happened, why it happened and how it can be prevented from happening again. The book will help readers convert such raw data into useful information and improve power system performance and reliability.
This book reports on various techniques for fault location on cross bonded cables, identifies the best method and describes the construction of a full fault locator system. The developed system is able of pinpointing the fault location on long cross-bonded cable systems and will be installed in Danish substations for monitoring the coming cable-based transmission grid. The work was conducted as part of a collaborative project between the department of energy technology at Aalborg University and the Danish transmission system operator for electricity and natural gas, Energinet.dk.
Electrical codes, standards, recommended practices and regulations can be complex subjects, yet are essential in both electrical design and life safety issues.This book demystifies their usage.It is a handbook of codes, standards, recommended practices and regulations in the United States involving electrical safety and design. Many engineers and electrical safety professionals may not be aware of all of those documents and their applicability. This book identifies those documents by category, allowing the ready and easy access to the relevant requirements. Because these documents may be updated on a regular basis, this book was written so that its information is not reliant on the latest edition or release of those codes, standards, recommended practices or regulations.No single document on the market today attempts to not only list the majority of relevant electrical design and safety codes, standards, recommended practices and regulations, but also explain their use and updating cycles. This book, one-stop-information-center for electrical engineers, electrical safety professionals, and designers, does. - Covers the codes, standards, recommended practices and regulations in the United States involving electrical safety and design, providing a comprehensive reference for engineers and electrical safety professionals - Documents are identified by category, enabling easy access to the relevant requirements - Not version-specific; information is not reliant on the latest edition or release of the codes, standards, recommended practices or regulations
The book starts from the existed problems in fault analysis of the lumped-parameter circuit model. It firstly introduces the basic electromagnetic phenomenon, uniform transmission line guided electromagnetic waves, multi-conductor system guided electromagnetic waves, fault generated travelling waves; then it introduces series of the traveling waves based protections, which includes principle, technology and application in practical power grid; it also discusses the travelling waves based fault location and the travelling waves based fault feeder selector in China. It systemically reveals the essential features of the fault traveling wave and concludes the analytical solutions of the transient fault traveling waves and the modulus maxima representation of the dyadic wavelet transform of fault traveling waves. Finally, the book analyzes the acquisition of traveling waves and the sensor’s characteristics. A unique fault travelling wave test device has been invented based on the theories of the book and will be applied in real systems.
This book offers a comprehensive reference guide to the important topics of fault analysis and protection system design for DC grids, at various voltage levels and for a range of applications. It bridges a much-needed research gap to enable wide-scale implementation of energy-efficient DC grids. Following an introduction, DC grid architecture is presented, covering the devices, operation and control methods. In turn, analytical methods for DC fault analysis are presented for different types of faults, followed by separate chapters on various DC fault identification methods, using time, frequency and time-frequency domain analyses of the DC current and voltage signals. The unit and non-unit protection strategies are discussed in detail, while a dedicated chapter addresses DC fault isolation devices. Step-by-step guidelines are provided for building hardware-based experimental test setups, as well as methods for validating the various algorithms. The book also features several application-driven case studies.
This newly developed guide compiles information on the application considerations of protective relays to ac transmission lines. The guide describes accepted transmission line protection schemes and the different electrical system parameters and situations that affect their application. Its purpose is to provide a reference for the selection of relay schemes and to assist less experienced protective relaying engineers in their application.
Proceedings on International Conference on Recent Advances in Applied Sciences conducted on February 11-13, 2016 by the Science and Humanities Association of St.Peter's University, Avadi , Chennai and Indian Spectrophysics Association, Chennai in corporate association with Scientific Communications Research Academy(SCRA), Chennai, India.
Fault Location on Power Lines enables readers to pinpoint the location of a fault on power lines following a disturbance. The nine chapters are organised according to the design of different locators. The authors do not simply refer the reader to manufacturers’ documentation, but instead have compiled detailed information to allow for in-depth comparison. Fault Location on Power Lines describes basic algorithms used in fault locators, focusing on fault location on overhead transmission lines, but also covering fault location in distribution networks. An application of artificial intelligence in this field is also presented, to help the reader to understand all aspects of fault location on overhead lines, including both the design and application standpoints. Professional engineers, researchers, and postgraduate and undergraduate students will find Fault Location on Power Lines a valuable resource, which enables them to reproduce complete algorithms of digital fault locators in their basic forms.
A comprehensive review of the development, challenges and utilisation of magnetic field measurement Magnetic Field Measurement with Applications to Modern Power Grids offers an authoritative review of the development of magnetic field measurement and the application of the technology to the smart grid. The authors, noted experts in the field, present the challenges to the field of magnetics and explore the use of cutting-edge magnetic technology in the development of the smart grid. In addition, the authors discussed the applications of magnetic field measurements in substations, generations systems, transmission systems and distribution systems. The specialized applications of magnetic field measurements in these venues are explored including the typical sensors used, the field strength levels and spectral frequencies involved and the mathematics that are needed to process data measurements. The book presents the complex topic of electromagnetics in clear and understandable terms. Magnetic Field Measurement with Applications to Modern Power Grids offers researchers in the magnetic community a guide to the progress of the smart grid and helps to inspire innovation of magnetic technologies in the smart grid. The technologies of measurement are a bridge between mathematical models and application oriented practice. The book is a guide to that bridge and: Offers a comprehensive review of the development of magnetic field measurement Shows how magnetic field measurement applies to the smart grid Outlines the challenges, trends and needs for future magnetic measurement systems Includes information on the need for levels of standardisation, smart grid applications and innovative sensors Written for researchers in smart grid, power engineers, power grid companies and professionals in the measurement and test industries, Magnetic Field Measurement with Applications to Modern Power Grids is an authoritative guide that offers a clear understanding of the relationship between the magnetic field measurement and power grids.
Power System Relaying An updated edition of the gold standard in power system relaying texts In the newly revised fifth edition of Power System Relaying, a distinguished team of engineers delivers a thorough update to an essential text used by countless univer??sities and industry courses around the world. The book explores the fundamentals of relaying and power system phenomena, including stability, protection, and reliability. The latest edition provides readers with substantial updates to transformer protection, rotating machinery protection, nonpilot distance protection of transmission and distribution lines, power system phenomena, and bus, reactor, and capacitor protection. It also includes an expanded introduction to the elements of protection systems. Problems and solutions round out the new material and offer an indispensable self-contained study environment. Readers will also find: A thorough introduction to protective relaying, including discussions of effective grounding and power system bus configurations In-depth explorations of relay operating principles and current and voltage transformers Fulsome discussions of nonpilot overcurrent and distance protection of transmission and distribution lines, as well as pilot protection of transmission lines Comprehensive treatments of rotating machinery protection and bus, reactor, and capacitor protection Perfect for undergraduate and graduate students studying power system engineering, Power System Relaying is an ideal resource for practicing engineers involved with power systems and academic researchers studying power system protection.
