Fault Analysis and Protection System Design for DC Grids
Fault Analysis and Protection System Design for DC Grids

Author: Abhisek Ukil

Publisher: Springer Nature

Published: 2020-04-13

Total Pages: 402

ISBN-13: 9811529779

DOWNLOAD EBOOK

This book offers a comprehensive reference guide to the important topics of fault analysis and protection system design for DC grids, at various voltage levels and for a range of applications. It bridges a much-needed research gap to enable wide-scale implementation of energy-efficient DC grids. Following an introduction, DC grid architecture is presented, covering the devices, operation and control methods. In turn, analytical methods for DC fault analysis are presented for different types of faults, followed by separate chapters on various DC fault identification methods, using time, frequency and time-frequency domain analyses of the DC current and voltage signals. The unit and non-unit protection strategies are discussed in detail, while a dedicated chapter addresses DC fault isolation devices. Step-by-step guidelines are provided for building hardware-based experimental test setups, as well as methods for validating the various algorithms. The book also features several application-driven case studies.

IEEE Guide for Protective Relay Applications to Transmission Lines
IEEE Guide for Protective Relay Applications to Transmission Lines

Author:

Publisher:

Published: 2000

Total Pages: 107

ISBN-13: 9780738118314

DOWNLOAD EBOOK

This newly developed guide compiles information on the application considerations of protective relays to ac transmission lines. The guide describes accepted transmission line protection schemes and the different electrical system parameters and situations that affect their application. Its purpose is to provide a reference for the selection of relay schemes and to assist less experienced protective relaying engineers in their application.

Index to IEEE Publications
Index to IEEE Publications

Author: Institute of Electrical and Electronics Engineers

Publisher:

Published: 1988

Total Pages: 496

ISBN-13:

DOWNLOAD EBOOK

Issues for 1973- cover the entire IEEE technical literature.

IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems
IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems

Author: IEEE Industry Applications Society. Power Systems Engineering Committee

Publisher: Inst of Elect & Electronic

Published: 1992

Total Pages: 234

ISBN-13: 9781559371414

DOWNLOAD EBOOK

The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and disadvantages of grounded versus ungrounded systems are discussed. Information is given on how to ground the system, where the system should be grounded, and how to select equipment for the grounding of the neutral circuits. Connecting the frames and enclosures of electric apparatus, such as motors, switchgear, transformers, buses, cables conduits, building frames, and portable equipment, to a ground system is addressed. The fundamentals of making the interconnection or ground-conductor system between electric equipment and the ground rods, water pipes, etc. are outlined. The problems of static electricity(how it is generated, what processes may produce it, how it is measured, and what should be done to prevent its generation or to drain the static charges to earth to prevent sparking(are treated. Methods of protecting structures against the effects of lightning are also covered. Obtaining a low-resistance connection to the earth, use of ground rods, connections to water pipes, etc, are discussed. A separate chapter on sensitive electronic equipment is included.

IEEE Recommended Practice for Electric Power Distribution for Industrial Plants
IEEE Recommended Practice for Electric Power Distribution for Industrial Plants

Author: Institute of Electrical and Electronics Engineers

Publisher: Institute of Electrical & Electronics Engineers(IEEE)

Published: 1994

Total Pages: 776

ISBN-13:

DOWNLOAD EBOOK

A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an overall system to achieve safety of life and preservation of property; reliability; simplicity of operation; voltage regulation in the utilization of equipment within the tolerance limits under all load conditions; care and maintenance; and flexibility to permit development and expansion. Recommendations are made regarding system planning; voltage considerations; surge voltage protection; system protective devices; fault calculations; grounding; power switching, transformation, and motor-control apparatus; instruments and meters; cable systems; busways; electrical energy conservation; and cost estimation.

IEEE Standard Dictionary of Electrical and Electronics Terms
IEEE Standard Dictionary of Electrical and Electronics Terms

Author: Institute of Electrical and Electronics Engineers

Publisher: Institute of Electrical & Electronics Engineers(IEEE)

Published: 1977

Total Pages: 902

ISBN-13:

DOWNLOAD EBOOK

Dictionary of terms used in electronics and electrical engineering - includes a list of abbreviations. Diagrams, graphs and references.

Integration of Distributed Generation in the Power System
Integration of Distributed Generation in the Power System

Author: Math H. J. Bollen

Publisher: John Wiley & Sons

Published: 2011-08-04

Total Pages: 526

ISBN-13: 111802902X

DOWNLOAD EBOOK

The integration of new sources of energy like wind power, solar-power, small-scale generation, or combined heat and power in the power grid is something that impacts a lot of stakeholders: network companies (both distribution and transmission), the owners and operators of the DG units, other end-users of the power grid (including normal consumers like you and me) and not in the least policy makers and regulators. There is a lot of misunderstanding about the impact of DG on the power grid, with one side (including mainly some but certainly not all, network companies) claiming that the lights will go out soon, whereas the other side (including some DG operators and large parks of the general public) claiming that there is nothing to worry about and that it's all a conspiracy of the large production companies that want to protect their own interests and keep the electricity price high. The authors are of the strong opinion that this is NOT the way one should approach such an important subject as the integration of new, more environmentally friendly, sources of energy in the power grid. With this book the authors aim to bring some clarity to the debate allowing all stakeholders together to move to a solution. This book will introduce systematic and transparent methods for quantifying the impact of DG on the power grid.

IEEE Guide for AC Motor Protection
IEEE Guide for AC Motor Protection

Author:

Publisher:

Published: 2000

Total Pages: 106

ISBN-13: 9780738124964

DOWNLOAD EBOOK

Generally accepted methods of protection for ac motors are provided. This guide identifies and summarizes the functions necessary for adequate protection of motors based on type, size, and application. This guide does not purport to detail the protective requirements if all motors in every situation.