Read and Download eBook Full
Author: Valeriy Vyatkin
Publisher:
Published: 2012
Total Pages: 0
ISBN-13: 9781936007936
DOWNLOAD EBOOKIEC 61499 is the standard for distributed control systems that follows on from the IEC 61131 standard for programmable logic controllers (PLC). This book is a practical guide for component-based development of distributed embedded and control systems as proposed by this international standard.
Author: Valeriy Vyatkin
Publisher:
Published: 2016
Total Pages:
ISBN-13: 9781941546727
DOWNLOAD EBOOKAuthor: Alois Zoitl
Publisher: CRC Press
Published: 2017-12-19
Total Pages: 521
ISBN-13: 1351830937
DOWNLOAD EBOOKDistributed Control Applications: Guidelines, Design Patterns, and Application Examples with the IEC 61499 discusses the IEC 61499 reference architecture for distributed and reconfigurable control and its adoption by industry. The book provides design patterns, application guidelines, and rules for designing distributed control applications based on the IEC 61499 reference model. Moreover, examples from various industrial domains and laboratory environments are introduced and explored.
Author: Martin Hirsch
Publisher: Logos Verlag Berlin GmbH
Published: 2010
Total Pages: 116
ISBN-13: 3832526072
DOWNLOAD EBOOKAktuell gibt es grosse neue Herausforderungen an die Hersteller von Automatisierungslosungen, um die vom Markt geforderte Flexibilitat gewahrleisten zu konnen. So mussen zum Einen Spezifikationstechniken entwickelt und angewendet werden, die der Komplexitat verteilter Systeme gerecht werden und nicht schon in der Phase der Spezifizierung fur erhohte Verwirrung sorgen. Zum Anderen mussen aber auch aktuelle Losungen fur die softwaretechnische Realisierung der Automatisierung nach und nach durch neuere, flexiblere Ansatze ersetzt werden. Die Moglichkeit der Verifizierbarkeit von Automatisierungslosungen sollte in diesem Kontext auch nicht ausser Acht gelassen werden. In den letzten Jahren haben sich hierzu verschiedene Technologien zum modellbasierten Steuerungsentwurf herausgebildet, auf welche in dieser Arbeit eingegangen wird. Diese Technologien werden methodisch miteinander verknupft, um eine glatte Ingenieursarbeit ohne Bruchstellen zu gewahrleisten. In dieser Arbeit wird speziell auf Vorgehensweisen zum verteilten Steuerungsentwurf eingegangen, die die Wiederverwendbarkeit von Steuerungskomponenten im Besonderen gewahrleisten.
Author: Khalgui, Mohamed
Publisher: IGI Global
Published: 2010-11-30
Total Pages: 651
ISBN-13: 1609600886
DOWNLOAD EBOOK"This book addresses the development of reconfigurable embedded control systems and describes various problems in this important research area, which include static and dynamic (manual or automatic) reconfigurations, multi-agent architectures, modeling and verification, component-based approaches, architecture description languages, distributed reconfigurable architectures, real-time and low power scheduling, execution models, and the implementation of such systems"--
Author: Christian Gerber
Publisher: Logos Verlag Berlin GmbH
Published: 2011
Total Pages: 131
ISBN-13: 3832528490
DOWNLOAD EBOOKThere exist certain key issues to modern industrial automation as modularity, reusability, portability, flexibility, extendibility and reconfigurability to create optimally coordinated automation solution for manufacturing plants. This will feature the operating companies to react fast and flexible to changed customer demands. An appropriate way to realize these issues is an object-oriented control implementation, which has been quite common since the late 90s. This work is focused on the upcoming standard IEC 61499, which defines an object-oriented and event-driven software model, which can be realised by any hardware the engineer prefers. Furthermore, the control implementation is application-oriented and all parts are mapped to available control devices later on. Thus, it is possible to replace one device by another by easily remapping the application. But, does this possibility need certain care during the development of the control application and how could a control engineer be supported to prove the correctness of the plant behaviour in any case? To answer this question the formal model discrete timed Net Condition/Event Systems is used in this work to model in a modular manner the control system and the plant. Both models are connected in closed loop to perform a reachability analysis. It is shown, how a control engineer can examine in a graphical manner the system behaviour for all possible cases by selecting interesting trajectories and drawing them as Gantt-Charts. Since the model of the plant incorporates all sensors and actuators, the state of the corresponding places can be included into the Gantt-Chart.Even if the control engineer has no deep knowledge about the used formal model, this systematic and tool supported way ensures the possibility to analyse the system behaviour in any case, if he changes the control application or remaps it. This will reduce downtimes during production changes and new plant can be brought faster into service.
Author: Vladimir Marik
Publisher: Springer Science & Business Media
Published: 2007-08-22
Total Pages: 470
ISBN-13: 3540744789
DOWNLOAD EBOOKThis volume constitutes the refereed proceedings of the Third International Conference on Industrial Applications of Holonic and Multi-Agent Systems held in September 2007. The 39 full papers were selected from among 63 submissions. They are organized into topical sections covering theoretical and methodological issues, algorithms and technologies, implementation and validation, applications, and supply chain management.
Author: Gomes, Lu¡s
Publisher: IGI Global
Published: 2009-07-31
Total Pages: 494
ISBN-13: 160566751X
DOWNLOAD EBOOK"This book provides innovative behavior models currently used for developing embedded systems, accentuating on graphical and visual notations"--Provided by publisher.
Author: Li Hsien Yoong
Publisher: Springer
Published: 2014-11-13
Total Pages: 209
ISBN-13: 3319105213
DOWNLOAD EBOOKThis book describes a novel approach for the design of embedded systems and industrial automation systems, using a unified model-driven approach that is applicable in both domains. The authors illustrate their methodology, using the IEC 61499 standard as the main vehicle for specification, verification, static timing analysis and automated code synthesis. The well-known synchronous approach is used as the main vehicle for defining an unambiguous semantics that ensures determinism and deadlock freedom. The proposed approach also ensures very efficient implementations either on small-scale embedded devices or on industry-scale programmable automation controllers (PACs). It can be used for both centralized and distributed implementations. Significantly, the proposed approach can be used without the need for any run-time support. This approach, for the first time, blurs the gap between embedded systems and automation systems and can be applied in wide-ranging applications in automotive, robotics, and industrial control systems. Several realistic examples are used to demonstrate for readers how the methodology can enable them to reduce the time-to-market, while improving the design quality and productivity.
Author: Alois Zoitl
Publisher:
Published: 2009
Total Pages: 0
ISBN-13: 9781934394274
DOWNLOAD EBOOKIEC 61499 is the newly adopted standard for distributed control systems and follows on from the IEC 61131 standard for programmable logic controllers (PLCs). This book discusses real-time execution of the models defined in the IEC 61499 standard with a closer look at predictable, event-triggered real-time systems. Manufacturing industries are experiencing rapidly changing global markets and thus face an increasing demand for flexible adaptable production systems. The text guides the reader in understanding how to design and reconfigure control applications at the real-time control layer of the automation system. The author describes how to introduce reconfiguration to existing as well as new software architectures and how to support reconfiguration in an execution environment. This book targets control, automation, and software engineers intending to develop distributed flexible industrial automation systems, as well as developers of adaptable embedded systems.
