Safeguarded Copy function that is available with IBM® Spectrum Virtualize Version 8.4.2 supports the ability to create cyber-resilient point-in-time copies of volumes that cannot be changed or deleted through user errors, malicious actions, or ransomware attacks. The system integrates with IBM Copy Services Manager to provide automated backup copies and data recovery. This IBM Redpaper® publication introduces the features and functions of Safeguarded Copy function by using several examples. This document is aimed at pre-sales and post-sales technical support specialists and storage administrators.
The focus of this document is to demonstrate an early threat detection by using IBM® QRadar® and the Safeguarded Copy feature that is available as part of IBM FlashSystem® and IBM SAN Volume Controller. Such early detection protects and quickly recovers the data if a cyberattack occurs. This document describes integrating IBM FlashSystem audit logs with IBM QRadar, and the configuration steps for IBM FlashSystem and IBM QRadar. It also explains how to use the IBM QRadar's device support module (DSM) editor to normalize events and assign IBM QRadar identifier (QID) map to the events. Post IBM QRadar configuration, we review configuring Safeguarded Copy on the application volumes by using volume groups and applying Safeguarded backup polices on the volume group. Finally, we demonstrate the use of orchestration software IBM Copy Services Manager to start a recovery, restore operations for data restoration on online volumes, and start a backup of data volumes.
This document is intended to facilitate the solution for Safeguarded Copy for cyber resiliency and logical air gap solution for IBM FlashSystem and SAN Volume Controller. The document showcases the configuration and end-to-end architecture for configuring the logical air-gap solution for cyber resiliency by using the Safeguarded Copy feature in IBM FlashSystem and IBM SAN Volume Control storage. The information in this document is distributed on an "as is" basis without any warranty that is either expressed or implied. Support assistance for the use of this material is limited to situations where IBM FlashSystem or IBM SAN Volume Controller storage devices are supported and entitled and where the issues are specific to a blueprint implementation.
This IBM® Redbooks® Product Guide publication describes the IBM FlashSystem® 5200 solution, which is a next-generation IBM FlashSystem control enclosure. It is an NVMe end-to-end platform that is targeted at the entry and midrange market and delivers the full capabilities of IBM FlashCore® technology. It also provides a rich set of software-defined storage (SDS) features that are delivered by IBM Spectrum® Virtualize, including the following features: Data reduction and deduplication Dynamic tiering Thin provisioning Snapshots Cloning Replication Data copy services Transparent Cloud Tiering IBM HyperSwap® including 3-site replication for high availability (HA) Scale-out and scale-up configurations further enhance capacity and throughput for better availability. The IBM FlashSystem 5200 is a high-performance storage solution that is based on a revolutionary 1U form factor. It consists of 12 NVMe Flash Devices in a 1U storage enclosure drawer with full redundant canister components and no single point of failure. It is designed for businesses of all sizes, including small, remote, branch offices and regional clients. It is a smarter, self-optimizing solution that requires less management, which enables organizations to overcome their storage challenges. Flash has come of age and price point reductions mean that lower parts of the storage market are seeing the value of moving over to flash and NVMe--based solutions. The IBM FlashSystem 5200 advances this transition by providing incredibly dense tiers of flash in a more affordable package. With the benefit of IBM FlashCore Module compression and new QLC flash-based technology becoming available, a compelling argument exists to move away from Nearline SAS storage and on to NVMe. With the release of IBM FlashSystem 5200 Software V8.4, extra functions and features are available, including support for new Distributed RAID1 (DRAID1) features, GUI enhancements, Redirect-on-write for Data Reduction Pool (DRP) snapshots, and 3-site replication capabilities. This book is aimed at pre-sales and post-sales technical support and marketing and storage administrators.
This IBM® Redbooks® publication captures several of the preferred practices and describes the performance gains that can be achieved by implementing the IBM FlashSystem® products that are powered by IBM Spectrum® Virtualize Version 8.4.2. These practices are based on field experience. This book highlights configuration guidelines and preferred practices for the storage area network (SAN) topology, clustered system, back-end storage, storage pools and managed disks, volumes, Remote Copy services, and hosts. It explains how you can optimize disk performance with the IBM System Storage Easy Tier® function. It also provides preferred practices for monitoring, maintaining, and troubleshooting. This book is intended for experienced storage, SAN, IBM FlashSystem, SAN Volume Controller, and IBM Storwize® administrators and technicians. Understanding this book requires advanced knowledge of these environments.
This IBM® Redbooks® publication captures several of the preferred practices and describes the performance gains that can be achieved by implementing the IBM SAN Volume Controller powered by IBM Spectrum® Virtualize Version 8.4.2. These practices are based on field experience. This book highlights configuration guidelines and preferred practices for the storage area network (SAN) topology, clustered system, back-end storage, storage pools and managed disks, volumes, Remote Copy services and hosts. It explains how you can optimize disk performance with the IBM System Storage Easy Tier® function. It also provides preferred practices for monitoring, maintaining, and troubleshooting. This book is intended for experienced storage, SAN, IBM FlashSystem®, IBM SAN Volume Controller, and IBM Storwize® administrators and technicians. Understanding this book requires advanced knowledge of these environments.
This IBM® Redbooks® publication helps you plan, install, configure, and manage Copy Services on the IBM DS8000® operating in an IBM Z® or Open Systems environment. This book helps you design and implement a new Copy Services installation or migrate from an existing installation. It includes hints and tips to maximize the effectiveness of your installation, and information about tools and products to automate Copy Services functions. It is intended for anyone who needs a detailed and practical understanding of the DS8000 Copy Services. This edition is an update for the DS8900 Release 9.1. Note that the Safeguarded Copy feature is covered in IBM DS8000 Safeguarded Copy, REDP-5506.
IBM® FlashSystem 9100 combines the performance of flash and Non-Volatile Memory Express (NVMe) with the reliability and innovation of IBM FlashCore® technology and the rich features of IBM SpectrumTM Virtualize — all in a powerful 2U storage system. Providing intensive data driven multi-cloud storage capacity, FlashSystem 9100 is deeply integrated with the software-defined capabilities of IBM Spectrum StorageTM, which allows you to easily add the multi-cloud solutions that best support your business. In this IBM Redbooks® publication, we discuss the product's features and planning steps, architecture, installation, configuration, and hints and tips.
This IBM® Redbooks® publication details the configuration and best practices for using the IBM FlashSystem® family of storage products within a VMware environment. The first version of this book was published in 2021 and specifically addressed IBM Spectrum® Virtualize Version 8.4 with VMware vSphere 7.0. This second version of this book includes all the enhancements that are available with IBM Spectrum Virtualize 8.5. Topics illustrate planning, configuring, operations, and preferred practices that include integration of IBM FlashSystem storage systems with the VMware vCloud suite of applications: VMware vSphere Web Client (vWC) vSphere Storage APIs - Storage Awareness (VASA) vSphere Storage APIs – Array Integration (VAAI) VMware Site Recovery Manager (SRM) VMware vSphere Metro Storage Cluster (vMSC) Embedded VASA Provider for VMware vSphere Virtual Volumes (vVols) This book is intended for presales consulting engineers, sales engineers, and IBM clients who want to deploy IBM FlashSystem storage systems in virtualized data centers that are based on VMware vSphere.
