This book discusses hydrodynamic lubrication in detail, based on the author’s own researches. Although this subject plays an important role in mechanical engineering, few books have been published on the subject. The first four chapters of this book are preparations for the following five. This book was written with graduate students, researchers and designers in view.
Hydrodynamic Lubrication is the culmination of over 20 years close, collaborative work by the five authors and discusses the practical use of the formalization of low pressure lubrication. The work concentrates on the developments to journal and thrust bearings and includes subjects such as: • the dynamic behaviour of plain and tilting-pads • the thermal aspects • the positive and negative effects of non-cyclindricity and shape defects resulting from manufacturing or operation • the effects of inertia • the appearance of Taylor's vortices and of turbulence and their repercussions. The book contains an abundance of test results objectively compared with theoretical conclusions and a chapter on "technical considerations" to ensure that draft mechanisms will work satisfactorily under the imposed conditions. Hydrodynamic Lubrication is an essential reference book for future and practising engineers who want to put hydrodynamic and hydrostatic journal bearings and thrust bearings into operation under conditions of total safety.
Elasto-Hydrodynamic Lubrication deals with the mechanism of elasto-hydrodynamic lubrication, that is, the lubrication regime in operation over the small areas where machine components are in nominal point or line contact. The lubrication of rigid contacts is discussed, along with the effects of high pressure on the lubricant and bounding solids. The governing equations for the solution of elasto-hydrodynamic problems are presented. Comprised of 13 chapters, this volume begins with an overview of elasto-hydrodynamic lubrication and representation of contacts by cylinders, followed by a discussion on equations relevant to lubrication, including the Reynolds equation. The reader is then introduced to lubrication of rigid cylinders; the importance of film thickness in highly loaded rigid contacts; the elasticity of solids in contact; and the theory of elasto-hydrodynamic lubrication. Subsequent chapters focus on apparatus and measurements of film thickness and film shape; friction and viscosity; and lubrication of gears and roller bearings. This book will be of interest to tribologists.
Specifically focusing on fluid film, hydrodynamic, and elastohydrodynamic lubrication, this edition studies the most important principles of fluid film lubrication for the correct design of bearings, gears, and rolling operations, and for the prevention of friction and wear in engineering designs. It explains various theories, procedures, and equations for improved solutions to machining challenges. Providing more than 1120 display equations and an introductory section in each chapter, Fundamentals of Fluid Film Lubrication, Second Edition facilitates the analysis of any machine element that uses fluid film lubrication and strengthens understanding of critical design concepts.
Hydrodynamic Lubrication of Non-Newtonian Fluids covers basic theory, lubrication failure and numerical methods and procedures. The title offers a feasible method for solving the hydrodynamic lubrication problem for non-Newtonian fluids. Whereas hydrodynamic lubrication in Newtonian fluids can be solved using the existing Reynolds equation, hydrodynamic lubrication in non-Newtonian fluid is much more difficult to solve because the non-Newtonian constitutive equation is nonlinear. Engineers and technicians working on non-Newtonian fluid lubrication calculation and analysis will find this to be an invaluable reference on the latest thinking on hydrodynamic lubrication. This book presents a unified solution to hydrodynamic lubrication in non-Newtonian fluids, proposing a flow separation method. In addition, the title gives methods and insights into viscosity in non-Newtonian fluids, the lubrication failure mechanism and fluid lubrication mechanism carrying capacity. Offers a solution to hydrodynamic lubrication in non-Newtonian fluids Covers a new separation method and sets up an integral differential equation towards a unified method Provides insights into the viscosity of non-Newtonian fluids, putting forward incremental and full viscosity as important concepts Analyzes the lubrication failure mechanism and fluid lubrication mechanism carrying capacity Presents researchers with a way of calculating and analyzing fluid dynamic pressure lubrication, flap lubrication and hot-bounce lubrication of common non-Newtonian fluids
Covers the latest developments in modeling elastohydrodynamic lubrication (EHL) problems using the finite element method (FEM) This comprehensive guide introduces readers to a powerful technology being used today in the modeling of elastohydrodynamic lubrication (EHL) problems. It provides a general framework based on the finite element method (FEM) for dealing with multi-physical problems of complex nature (such as the EHL problem) and is accompanied by a website hosting a user-friendly FEM software for the treatment of EHL problems, based on the methodology described in the book. Finite Element Modeling of Elastohydrodynamic Lubrication Problems begins with an introduction to both the EHL and FEM fields. It then covers Standard FEM modeling of EHL problems, before going over more advanced techniques that employ model order reduction to allow significant savings in computational overhead. Finally, the book looks at applications that show how the developed modeling framework could be used to accurately predict the performance of EHL contacts in terms of lubricant film thickness, pressure build-up and friction coefficients under different configurations. Finite Element Modeling of Elastohydrodynamic Lubrication Problems offers in-depth chapter coverage of Elastohydrodynamic Lubrication and its FEM Modeling, under Isothermal Newtonian and Generalized-Newtonian conditions with the inclusion of Thermal Effects; Standard FEM Modeling; Advanced FEM Modeling, including Model Order Reduction techniques; and Applications, including Pressure, Film Thickness and Friction Predictions, and Coated EHL. This book: Comprehensively covers the latest technology in modeling EHL problems Focuses on the FEM modeling of EHL problems Incorporates advanced techniques based on model order reduction Covers applications of the method to complex EHL problems Accompanied by a website hosting a user-friendly FEM-based EHL software Finite Element Modeling of Elastohydrodynamic Lubrication Problems is an ideal book for researchers and graduate students in the field of Tribology.
This Series provides the necessary elements to the development and validation of numerical prediction models for hydrodynamic bearings. This book describes the thermo-hydrodynamic and the thermo-elasto-hydrodynamic lubrication. The algorithms are methodically detailed and each section is thoroughly illustrated.
