Hot Cracking Phenomena in Welds II
Hot Cracking Phenomena in Welds II

Author: Thomas Böllinghaus

Publisher: Springer Science & Business Media

Published: 2008-08-07

Total Pages: 458

ISBN-13: 3540786287

DOWNLOAD EBOOK

Failure of welded components can occur during service as well as during fabrication. Most common, analyses of the resistance of welded components against failure are targeted at crack avoidance. Such evaluations are increasingly carried out by modern weldability studies, i. e. considering interactions between the selected base and filler materials, structural design and welding process. Such weldability investigations are particularly targeted to prevent hot cracking, as one of the most common cracking phenomena occurring during weld fabrication. To provide an international information and discussion platform to combat hot cracking, an international workshop on Hot Cracking Phenomena in Welds has been created, based on an initiative of the Institute for Materials and Joining Technology at the Otto-von-Guericke University in Magdeburg and the Division V. 5 – Safety of Joined Components at the Federal Institute for Materials Research and Testing (BAM) in Berlin, Germany. The first workshop was organized in Berlin under the topics mechanisms and phenomena, metallurgy and materials, modelling and simulations as well as testing and standardization. It consisted of 20 individual contributions from eight countries, which were compiled in a book that found a very ready market, not only in the welding community. As a consequence of increasing interest, it has been decided to establish the Workshop on Hot Cracking Phenomena in Welds as a regular event every three years embedded in the International Institute of Welding (IIW). Attached to the IIW Commission IX and II Spring intermediate meetings, the second workshop was organized in March 2007.

Hot Cracking Phenomena in Welds
Hot Cracking Phenomena in Welds

Author: Thomas Böllinghaus

Publisher: Springer Science & Business Media

Published: 2005-10-20

Total Pages: 398

ISBN-13: 354027460X

DOWNLOAD EBOOK

Although the avoidance of hot cracking still represents a major topic in modern fabrication welding components, the phenomena have not yet been fully understood. Through the 20 individual contributions from experts all over the world the present state of knowledge about hot cracking during welding is defined, and the subject is approached from four different viewpoints. The first chapter provides an overview of the various hot cracking phenomena. Different mechanisms of solidification cracking proposed in the past decades are summarized and new insight is particularly given into the mechanism of ductility dip cracking. The effects of different alloying elements on the hot cracking resistance of various materials are shown in the second chapter and, as a special metallurgical effect, the initiation of stress corrosion cracking at hot cracks has been highlighted. The third chapter outlines how numerical analyses and other modelling techniques can be utilized to describe hot cracking phenomena and how such results might contribute to the explanation of the mechanisms. Various hot cracking test procedures are presented in the final chapter with a special emphasis on standardization. For the engineering and natural scientists in research and development the book provides both, new insight and a comprehensive overview of hot cracking phenomena in welds. The contributions additionally give numerous individual solutions and helpful advice for international welding engineers to avoid hot cracking in practice. Furthermore, it represents a very helpful tool for upper level metallurgical and mechanical engineering students.

Hot Cracking Phenomena in Welds III
Hot Cracking Phenomena in Welds III

Author: John Lippold

Publisher: Springer Science & Business Media

Published: 2011-05-03

Total Pages: 439

ISBN-13: 3642168647

DOWNLOAD EBOOK

This is the third in a series of compendiums devoted to the subject of weld hot cracking. It contains 22 papers presented at the 3rd International Hot Cracking Workshop in Columbus, Ohio USA in March 2010. In the context of this workshop, the term “hot cracking” refers to elevated temperature cracking associated with either the weld metal or heat-affected zone. These hot cracking phenomena include weld solidification cracking, HAZ and weld metal liquation cracking, and ductility-dip cracking. The book is divided into three major sections based on material type; specifically aluminum alloys, steels, and nickel-base alloys. Each of these sections begins with a keynote paper from prominent researchers in the field: Dr. Sindo Kou from the University of Wisconsin, Dr. Thomas Böllinghaus from BAM and the University of Magdeburg, and Dr. John DuPont from Lehigh University. The papers contained within include the latest insight into the mechanisms associated with hot cracking in these materials and methods to prevent cracking through material selection, process modification, or other means. The three Hot Cracking Phenomena in Welds compendiums combined contain a total of 64 papers and represent the best collection of papers on the topic of hot cracking ever assembled.

Cracking Phenomena in Welds IV
Cracking Phenomena in Welds IV

Author: Thomas Böllinghaus

Publisher: Springer

Published: 2016-02-10

Total Pages: 502

ISBN-13: 3319284347

DOWNLOAD EBOOK

This is the fourth volume in the well-established series of compendiums devoted to the subject of weld hot cracking. It contains the papers presented at the 4th International Cracking Workshop held in Berlin in April 2014. In the context of this workshop, the term “cracking” refers to hot cracking in the classical and previous sense, but also to cold cracking, stress-corrosion cracking and elevated temp. solid-state cracking. A variety of different cracking subjects are discussed, including test standards, crack prediction, weldability determination, crack mitigation, stress states, numerical modelling, and cracking mechanisms. Likewise, many different alloys were investigated such as aluminum alloys, copper-aluminum dissimilar metal, austenitic stainless steel, nickel base alloys, duplex stainless steel, creep resistant steel, and high strength steel.

Welding Metallurgy and Weldability of Nickel-Base Alloys
Welding Metallurgy and Weldability of Nickel-Base Alloys

Author: John C. Lippold

Publisher: John Wiley & Sons

Published: 2011-09-20

Total Pages: 370

ISBN-13: 1118210034

DOWNLOAD EBOOK

The most up-to-date coverage of welding metallurgy aspects and weldability issues associated with Ni-base alloys Welding Metallurgy and Weldability of Nickel-Base Alloys describes the fundamental metallurgical principles that control the microstructure and properties of welded Ni-base alloys. It serves as a practical how-to guide that enables engineers to select the proper alloys, filler metals, heat treatments, and welding conditions to ensure that failures are avoided during fabrication and service. Chapter coverage includes: Alloying additions, phase diagrams, and phase stability Solid-solution strengthened Ni-base alloys Precipitation strengthened Ni-base alloys Oxide dispersion strengthened alloys and nickel aluminides Repair welding of Ni-base alloys Dissimilar welding Weldability testing High-chromium alloys used in nuclear power applications With its excellent balance between the fundamentals and practical problem solving, the book serves as an ideal reference for scientists, engineers, and technicians, as well as a textbook for undergraduate and graduate courses in welding metallurgy.

Resistance Welding
Resistance Welding

Author: Hongyan Zhang

Publisher: CRC Press

Published: 2011-12-13

Total Pages: 465

ISBN-13: 1466556412

DOWNLOAD EBOOK

Drawing on state-of-the-art research results, Resistance Welding: Fundamentals and Applications, Second Edition systematically presents fundamental aspects of important processes in resistance welding and discusses their implications on real-world welding applications. This updated edition describes progress made in resistance welding research and

Welding Metallurgy and Weldability
Welding Metallurgy and Weldability

Author: John C. Lippold

Publisher: John Wiley & Sons

Published: 2014-11-24

Total Pages: 418

ISBN-13: 1118230701

DOWNLOAD EBOOK

Describes the weldability aspects of structural materials used in a wide variety of engineering structures, including steels, stainless steels, Ni-base alloys, and Al-base alloys Welding Metallurgy and Weldability describes weld failure mechanisms associated with either fabrication or service, and failure mechanisms related to microstructure of the weldment. Weldability issues are divided into fabrication and service related failures; early chapters address hot cracking, warm (solid-state) cracking, and cold cracking that occur during initial fabrication, or repair. Guidance on failure analysis is also provided, along with examples of SEM fractography that will aid in determining failure mechanisms. Welding Metallurgy and Weldability examines a number of weldability testing techniques that can be used to quantify susceptibility to various forms of weld cracking. Describes the mechanisms of weldability along with methods to improve weldability Includes an introduction to weldability testing and techniques, including strain-to-fracture and Varestraint tests Chapters are illustrated with practical examples based on 30 plus years of experience in the field Illustrating the weldability aspects of structural materials used in a wide variety of engineering structures, Welding Metallurgy and Weldability provides engineers and students with the information needed to understand the basic concepts of welding metallurgy and to interpret the failures in welded components.

Welding Metallurgy of Stainless Steels
Welding Metallurgy of Stainless Steels

Author: Erich Folkhard

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 289

ISBN-13: 3709189659

DOWNLOAD EBOOK

When considering the operational performance of stainless steel weldments the most important points to consider are corrosion resistance, weld metal mechanical properties and the integrity ofthe weldedjoint. Mechanical and corrosion resistance properties are greatly influenced by the metallurgical processes that occur during welding or during heat treatment of welded components. This book is aimed, there fore, at providing information on the metallurgical problems that may be encountered during stainless steel welding. In this way we aim to help overcome a certain degree of insecurity that is often encountered in welding shops engaged in the welding of stainless steels and is often the cause of welding problems which may in some instances lead to the premature failure of the welded component. The metallurgical processes that occur during the welding of stainless steel are of a highly intricate nature. The present book focuses in particular on the signif icance of constitution diagrams, on the processes occurring during the solidification of weld metal and on the recrystallization and precipitation phenomena which take place in the area of the welds. There are specific chapters covering the hot cracking resistance during welding and the practical welding of a number of different stainless steel grades. In addition, recommendations are given as to the most suitable procedures to be followed in order to obtain maximum corrosion resistance and mechanical properties from the weldments.

Theory of Thermomechanical Processes in Welding
Theory of Thermomechanical Processes in Welding

Author: Andrzej Sluzalec

Publisher: Springer Science & Business Media

Published: 2005-12-05

Total Pages: 173

ISBN-13: 1402029918

DOWNLOAD EBOOK

The main purpose of this book is to provide a unified and systematic continuum approach to engineers and applied physicists working on models of deformable welding material. The key concept is to consider the welding material as an thennodynamic system. Significant achievements include thermodynamics, plasticity, fluid flow and numerical methods. Having chosen point of view, this work does not intend to reunite all the information on the welding thermomechanics. The attention is focused on the deformation of welding material and its coupling with thermal effects. Welding is the process where the interrelation of temperature and deformation appears throughout the influence of thermal field on material properties and modification of the extent of plastic zones. Thermal effects can be studied with coupled or uncoupled theories of thermomechanical response. A majority of welding problems can be satisfactorily studied within an uncoupled theory. In such an approach the temperature enters the stress-strain relation through the thennal dilatation and influences the material constants. The heat conduction equation and the relations governing the stress field are considered separately. In welding a material is either in solid or in solid and liquid states. The flow of metal and solidification phenomena make the welding process very complex. The automobile, aircraft, nuclear and ship industries are experiencing a rapidly-growing need for tools to handle welding problems. The effective solutions of complex problems in welding became possible in the last two decades, because of the vigorous development of numerical methods for thermal and mechanical analysis.