For more than 50 years, the Springer VDI Heat Atlas has been an indispensable working means for engineers dealing with questions of heat transfer. Featuring 50% more content, this new edition covers most fields of heat transfer in industrial and engineering applications. It presents the interrelationships between basic scientific methods, experimental techniques, model-based analysis and their transfer to technical applications.
Today's frustrations and anxieties resulting from two energy crises in only one decade, show us the problems and fragility of a world built on high energy consumption, accustomed to the use of cheap non-renewable energy and to the acceptance of eXisting imbalances between the resources and demands of countries. Despite all these stressing factors, our world is still hesitatins about the urgency of undertaking new and decisive research that could stabilize our future, Could this trend change in the near future? In our view, two different scenarios are possible. A renewed energy tension could take place with an unpredictable timing mostly related to political and economic factors, This could bring again scientists and technologists to a new state of shock and awaken our talents, A second interesting and beneficial scenario could result from the positive influence of a new generation of researchers that with or without immediate crisis, acting both in industry and academia, will face the challenge of developing technologies and processes to pave the way to a less vulnerable society, Because Chemical Reactor Design and Technology activities are at the heart of these required new technologies the timeliness of the NATO-Advanced Study Institute at the University of Western Ontario, London, was very appropriate.
Packed bed columns are largely employed for absorption, desorption, rectification and direct heat transfer processes in chemical and food industry, environmental protection and also processes in thermal power stations like water purification, flue gas heat utilization and SO2 removal. These Separation processes, are estimated to account for 40%-70% of capital and operating costs in process industry. Packed bed columns are widely employed in this area. Their usage also for direct heat transfer between gas and liquid, enlarge their importance. They are the best apparatuses, from thermodynamical point of view, for mass and heat transfer processes between gas and liquid phase. Their wide spreading is due to low capital investments and operating costs. Since 1995 there has not been published a specialised book in this area, and this is a period of quick development of packed columns. Packed Bed Columns reflects the state of this field including the author's experience on creating and investigating of new packings, column internals and industrial columns. - Considers the theories of mass transfer processes and shows how they help the construction of highly effective packings - Complete information about the performance characteristics of different modern types of highly effective packings - Considers the models for calculation and areas of their application
This concise professional reference provides a fundamental framework for the design and operation of solid-state fermentation bioreactors, enabling researchers currently working at laboratory scale to scale up their processes. The authors survey bioreactor types in common use, and describe in depth how to plan a project, and model heat transfer phenomena. The book includes case studies, and a review of practical issues involved in bioreactor performance.
Process Intensification: Engineering for Efficiency, Sustainability and Flexibility is the first book to provide a practical working guide to understanding process intensification (PI) and developing successful PI solutions and applications in chemical process, civil, environmental, energy, pharmaceutical, biological, and biochemical systems. Process intensification is a chemical and process design approach that leads to substantially smaller, cleaner, safer, and more energy efficient process technology. It improves process flexibility, product quality, speed to market and inherent safety, with a reduced environmental footprint. This book represents a valuable resource for engineers working with leading-edge process technologies, and those involved research and development of chemical, process, environmental, pharmaceutical, and bioscience systems. - No other reference covers both the technology and application of PI, addressing fundamentals, industry applications, and including a development and implementation guide - Covers hot and high growth topics, including emission prevention, sustainable design, and pinch analysis - World-class authors: Colin Ramshaw pioneered PI at ICI and is widely credited as the father of the technology
Interest in structured catalysts is steadily increasing due to the already proven, as well as potential, advantages of these catalysts. Updating the comprehensive coverage of the first edition published in 1998 with the latest science and applications, Structured Catalysts and Reactors, Second Edition gives detailed information on all aspect
to increase the use of direct contact processes, the National Science Foundation sup ported a workshop on direct contact heat transfer at the Solar Energy Research Insti tute in the summer of 1985. We served as organizers for this workshop, which em phasized an area of thermal engineering that, in our opinion, has great promise for the future, but has not yet reached the point of wide-spread commercial application. Hence, a summary of the state of knowledge at this point is timely. The workshop had a dual objective: 1. To summarize the current state of knowledge in such a form that industrial practi tioners can make use of the available information. 2. To indicate the research and development needed to advance the state-of-the-art, indicating not only what kind of research is needed, but also the industrial poten tial that could be realized if the information to be obtained through the proposed research activities were available.
Three different models of bulk-stored agricultural products with air flow through the bulk, predicting the temperature profiles or the velocity of natural convection, are developed. The temperature distribution in a cylindrical container with insulated walls and open top and bottom, filled with heat-generating model material is studied experimentally, used to calculate the velocity of natural convection and compared with model predictions. A two-dimensional two-phase model of temperature and moisture distribution during cooling and storage of agricultural products in a cylindrical container is developed. The influence of convective transport (natural and forced convection), heat generation, heat conduction, evaporation, condensation and moisture diffusion is incorporated in the model equations. A sensitivity analyses with this model is presented. The model calculations are compared with the measured temperature course during self-heating of potatoes or model material. Three-dimensional natural convection in a closed container filled with heat-generating products is modelled with a three-dimensional one-phase model. Temperature measurements in a rectangular container filled with model material, potatoes or Brussels sprouts are discussed and compared with the model calculations. Literature on natural convection in porous media with or without heat generation and on models of bulk-stored agricultural products is reviewed.
This volume is concerned with the transport of thermal energy in flows of practical significance. The temperature distributions which result from convective heat transfer, in contrast to those associated with radiation heat transfer and conduction in solids, are related to velocity characteristics and we have included sufficient information of momentum transfer to make the book self-contained. This is readily achieved because of the close relation ship between the equations which represent conservation of momentum and energy: it is very desirable since convective heat transfer involves flows with large temperature differences, where the equations are coupled through an equation of state, as well as flows with small temperature differences where the energy equation is dependent on the momentum equation but the momentum equation is assumed independent of the energy equation. The equations which represent the conservation of scalar properties, including thermal energy, species concentration and particle number density can be identical in form and solutions obtained in terms of one dependent variable can represent those of another. Thus, although the discussion and arguments of this book are expressed in terms of heat transfer, they are relevant to problems of mass and particle transport. Care is required, however, in making use of these analogies since, for example, identical boundary conditions are not usually achieved in practice and mass transfer can involve more than one dependent variable.
