Hardening and Tempering

Hardening and Tempering

Author: E. R. Markham

Publisher: Read Books Ltd

Published: 2017-08-25

Total Pages: 85

ISBN-13: 1473339782

DOWNLOAD EBOOK

This vintage book contains a collection of classic articles on the subject of the hardening and tempering in blacksmithing, taking the reader through the processes in a factory setting. First published in 1909, these articles contain a wealth of timeless information regarding the subject's history. They detail industrial hardening plants, information on chemicals used for heating and hardening, and guides for industrial tool work. Articles featured in this book include: - Hardening Steel – by E. R. Markham - Forging, Hardening and Annealing High-Speed Steel – by W. J. Todd - Local Hardening and Tempering – by William A. Painter A concise volume not to be missed by the modern blacksmithing enthusiasts and is reprinted here by Read & Co. Books with a new, specially commissioned introduction on blacksmithing.


Metallurgy for the Non-Metallurgist, Second Edition

Metallurgy for the Non-Metallurgist, Second Edition

Author: Arthur C. Reardon

Publisher: ASM International

Published: 2011-01-01

Total Pages: 527

ISBN-13: 1615038450

DOWNLOAD EBOOK

The completely revised Second Edition of Metallurgy for the Non-Metallurgist provides a solid understanding of the basic principles and current practices of metallurgy. This major new edition is for anyone who uses, makes, buys or tests metal products. For both beginners and others seeking a basic refresher, the new Second Edition of the popular Metallurgy for the Non-Metallurgist gives an all-new modern view on the basic principles and practices of metallurgy. This new edition is extensively updated with broader coverage of topics, new and improved illustrations, and more explanation of basic concepts. Why are cast irons so suitable for casting? Do some nonferrous alloys respond to heat treatment like steels? Why is corrosion so pernicious? These are questions that can be answered in this updated reference with many new illustrations, examples, and descriptions of basic metallurgy.


Steel and Its Heat Treatment

Steel and Its Heat Treatment

Author: Karl-Erik Thelning

Publisher: Butterworth-Heinemann

Published: 2013-10-22

Total Pages: 585

ISBN-13: 1483163369

DOWNLOAD EBOOK

Steel and its Heat Treatment: Bofors Handbook describes the fundamental metallographic concepts, materials testing, hardenability, heat treatment, and dimensional changes that occur during the hardening and tempering stages of steel. The book explains the boundaries separating the grain contents of steel, which are the low-angle grain boundaries, the high-angle grain boundaries, and the twinning boundaries. Engineers can determine the hardenability of steel through the Grossman test or the Jominy End-Quench test. Special hardening and tempering methods are employed for steel that are going to be fabricated into tools. The different methods of hardening are manual hardening for a small surface (the tip of a screw); spin hardening for objects with a rotational symmetry (gears with 5 modules or less); and progressive hardening (or a combination with spin hardening) for flat surfaces. The hardening and tempering processes cause changes in size and shape of the substance. The text presents examples of dimensional changes during the hardening and tempering of tool steels such as those occurring in plain-carbon steels and low-alloy steels. The book is a source of reliable information needed by engineers, tool and small equipment designers, as well as by metallurgists, structural, and mechanical engineers.


Practical Heat Treating

Practical Heat Treating

Author: Jon L. Dossett

Publisher: ASM International

Published: 2006-01-01

Total Pages: 302

ISBN-13: 1615031103

DOWNLOAD EBOOK

What is heat treatment? This book describes heat treating technology in clear, concise, and nontheoretical language. It is an excellent introduction and guide for design and manufacturing engineers, technicians, students, and others who need to understand why heat treatment is specified and how different processes are used to obtain desired properties. The new Second Edition has been extensively updated and revised by Jon. L. Dossett, who has more than forty years of experience in theat treating operations and management. The update adds important information about new processes and process control techniques that have been developed or refined in recent years. Helpfull appendices have been added on decarburization of steels, boost/diffues cycles for carburizing, and process verification.


Steels: Processing, Structure, and Performance, Second Edition

Steels: Processing, Structure, and Performance, Second Edition

Author: George Krauss

Publisher: ASM International

Published: 2015-03-01

Total Pages: 705

ISBN-13: 1627080848

DOWNLOAD EBOOK

George Krauss, University Emeritus Professor, Colorado School of Mines and author of the best-selling ASM book Steels: Processing, Structure, and Performance, discusses some of the important additions and updates to the new second edition.


Heat Treatment

Heat Treatment

Author: William E. Bryson

Publisher: Hanser

Published: 2015-06-03

Total Pages: 338

ISBN-13: 9781569904855

DOWNLOAD EBOOK

This book focuses on heat-treating by ASM, SME, and AISI standards. The manual has been created for use in student education, as well as to guide professionals who has been heat treating their entire lives. It is written without the typical metallurgical jargon. This book will serve as a training manual from day one in learning how to heat treat a metal, and then also serve as a day to day reference for a lifetime. This manual zeros in on the popular tool steels, alloy steels, heat-treatable stainless steels, case hardening steels, and more. It deals with these metals with up-to-date usage and processing recipes. What is different with this manual from all the others is that it doesn't just deal with the heat-treatment process, it also covers the continuation of the hardening process with cryogenics. Yes, it is written to help those who may want a thorough understanding of what goes on in the process of heat-treating, and how to do it better. However, it also shows how proper heat and cryogenic processing can save your company money. Making money through longer life tooling, decarb-free and stress relief, all while learning how to create a better, finer grain structure. This manual shows the reader that hardness is only an indication of hardness, and that the real money savings is in the fine grained structure. This manual is written for toolmakers, engineers, heat-treaters, procurement, management personnel, and anyone else who is involved in metals. Metals are affected by the entire thermal scale from 2400�F, down to -320�F. That is the complete range of thermally treated metals and that is what this manual covers.


Practical Induction Heat Treating, Second Edition

Practical Induction Heat Treating, Second Edition

Author: Richard E. Haimbaugh

Publisher: ASM International

Published: 2015-08-01

Total Pages: 381

ISBN-13: 1627080902

DOWNLOAD EBOOK

Practical Induction Heat Treating, Second Edition is a quick reference source for induction heaters. This book ties-in the metallurgy, theory, and practice of induction heat treating from a hands-on explanation of what floor people need to know. This book includes practical tables and process analysis of induction heating.


Heat Treater's Guide

Heat Treater's Guide

Author: Harry Chandler

Publisher: ASM International

Published: 1996-01-01

Total Pages: 690

ISBN-13: 9780871705655

DOWNLOAD EBOOK

The material is contained in more than 500 datasheet articles, each devoted exclusively to one particular alloy, a proven format first used in the complementary guide for irons and steels. For even more convenience, the datasheets are arranged by alloy groups: nickel, aluminum, copper, magnesium, titanium, zinc and superalloys. The book provides very worthwhile and practical information in such areas as: compositions, trade names, common names, specifications (both U.S. and foreign), available products forms, typical applications, and properties (mechanical, fabricating, and selected others). This comprehensive resource also covers the more uncommon alloys by groups in the same datasheet format. Included are: refractory metals and alloys (molybdenum, tungsten, niobium, tantalum), beryllium copper alloys, cast and P/M titanium parts, P/M aluminum parts, lead and lead alloys, tin-rich alloys, and sintering copper-base materials (copper-tin, bronze, brass, nickel silvers).