Plastics possess properties that have revolutionized the manufacture of products in the 20th century and beyond. It remains critical to understand their behavior throughout their life cycle, from manufacture to use and eventually to reclamation and disposal. This volume highlights the most prominent tools in physical and chemical analysis techniques and applications. A practical reference for performing measurements, solving problems, and investigating behavioral phenomena, the editors advocate a phenomenological approach, relying on case studies and illustrations to represent possible outcomes of each technique and presenting the basic governing equations where necessary.
Polymers have undoubtedly changed the world through many products that improve our lives. However, additives used to modify the overall characteristics of these materials may not be fully disclosed or understood. These additives may present possible environmental and health hazards. It is important to monitor consumer products for these compounds u
The selection and application of engineered materials is an integrated process that requires an understanding of the interaction between materials properties, manufacturing characteristics, design considerations, and the total life cycle of the product. This reference book on engineering plastics provides practical and comprehensive coverage on how the performance of plastics is characterized during design, property testing, and failure analysis. The fundamental structure and properties of plastics are reviewed for general reference, and detailed articles describe the important design factors, properties, and failure mechanisms of plastics. The effects of composition, processing, and structure are detailed in articles on the physical, chemical, thermal, and mechanical properties. Other articles cover failure mechanisms such as: crazing and fracture; impact loading; fatigue failure; wear failures, moisture related failure; organic chemical related failure; photolytic degradation; and microbial degradation. Characterization of plastics in failure analysis is described with additional articles on analysis of structure, surface analysis, and fractography.
Written in easy-to-read and -use format, this book updates and revises its bestselling predecessor to become the most complete, comprehensive resource on plastics testing. This book has an emphasis on significance of test methods and interpretation of results. The book covers all aspects of plastics testing, failure analysis, and quality assurance - including chapters on identification analysis, failure analysis, and case studies. The book concludes with a substantial appendix with useful data, charts and tables for ready reference. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.
With 588 images and associated analyses for avoidance of damage to plastics, this manual is aimed at both professionals and students. Many technical terms and colloquial descriptions, explanations, and interconnections with related areas, together with the images, facilitate the reader in determining and describing the exact type of damage of a given sample. The images, from microscopic quality and damage analysis of molding materials, semi-finished products, and molded parts, are divided into 74 subject areas of plastics processing and application, and are classified based on over 2620 industry-standard technical terms. The analyses were performed with various light microscopes and a scanning electron microscope.
An outstanding and thorough presentation of the complete field of plastics processing Handbook of Plastic Processes is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given product while enabling users to better understand the performance characteristics of each process. The authors, all experts in their fields, explain in clear, concise, and practical terms the advantages, uses, and limitations of each process, as well as the most modern and up-to-date technologies available in their application. Coverage includes chapters on: Injection molding Compression and transfer molding Sheet extrusion Blow molding Calendering Foam processing Reinforced plastics processing Liquid resin processing Rotational molding Thermoforming Reaction injection molding Compounding, mixing, and blending Machining and mechanical fabrication Assembly, finishing, and decorating Each chapter details a particular process, its variations, the equipment used, the range of materials utilized in the process, and its advantages and limitations. Because of its increasing impact on the industry, the editor has also added a chapter on nanotechnology in plastics processing.
Plastics have become increasingly important in the products used in our society, ranging from housing to packaging, transportation, business machines and especially in medicine and health products. Designing plastic parts for this wide range of uses has become a major activity for designers, architects, engineers, and others who are concerned with product development. Because plastics are unique materials with a broad range of proper ties they are adaptable to a variety of uses. The uniqueness of plastics stems from their physical characteristics which are as different from metals, glasses, and ceramics as these materials are different from each other. One major concern is the design of structures to take loads. Metals as well as the other materials are assumed to respond elastically and to recover completely their original shape after the load is removed. Based on this simple fact, extensive litera ture on applied mechanics of materials has been developed to enable designers to predict accurately the performance of structures under load. Many engineers depend on such texts as Timoshenko's Strength of Materials as a guide to the performance of structures. Using this as a guide, generations of engineers have designed economical and safe structural parts. Unfortunately, these design principles must be modified when designing with plastics since they do not respond elastically to stress and undergo permanent deformation with sus tained loading.
How easy life would be if only moldings were the same size and shape as the mold. But they never are, as molders, toolmakers, designers and end users know only too well. Shrinkage means that the size is always different; warpage often changes the shape too. The effects are worse for some plastics than others. Why is that? What can you do about it? The Handbook of Molded Part Shrinkage and Warpage is the first and only book to deal specifically with this fundamental problem. Jerry Fischer’s Handbook explains in plain terms why moldings shrink and warp, shows how additives and reinforcements change the picture, sets out the effect of molding process conditions, and explains why you never can have a single ‘correct’ shrinkage value. It goes on to demonstrate how to alleviate the problem through careful design of the molded part and the mold, and by proper material selection. It also examines computer-aided methods of forecasting shrinkage and warpage. And most important of all, the Handbook gives you the data you need to work with. Authoritative and rooted in extensive industrial experience, the expert guidance contained in this handbook offers practical understanding to novices, and new insights to readers already skilled in the art of injection molding and mold making Contains the answers to common problems and detailed advice on how to control mold and post-mold shrinkage and warpage Case Studies illustrate and enrich the text; Data tables provide the empirical data that is essential for success, but hard to come by
This comprehensive book provides guidelines for maximizing plastics proc essing efficiency in the manufacture of all types of products, using all types of plastics. A practical approach is employed to present fundamental, yet comprehensive, coverage of processing concepts. The information and data presented by the many tables and figures interrelate the different variables that affect injection molding, extrusion, blow molding, thermoforming, compression molding, reinforced plastics molding, rotational molding, re action injection molding, coining, casting, and other processes. The text presents a great number of problems pertaining to different phases of processing. Solutions are provided that will meet product per formance requirements at the lowest cost. Many of the processing variables and their behaviors in the different processes are the same, as they all in volve basic conditions of temperature, time, and pressure. The book begins with information applicable to all processes, on topics such as melt soft ening flow and controls; all processes fit into an overall scheme that re quires the interaction and proper control of systems. Individual processes are reviewed to show the effects of changing different variables to meet the goal of zero defects. The content is arranged to provide a natural progres sion from simple to complex situations, which range from control of a sin gle manual machine to simulation of sophisticated computerized processes that interface with many different processing functions.
Biopolymers and Biodegradable Plastics are a hot issue across the Plastics industry, and for many of the industry sectors that use plastic, from packaging to medical devices and from the construction indusry to the automotive sector. This book brings together a number of key biopolymer and biodegradable plastics topics in one place for a broad audience of engineers and scientists, especially those designing with biopolymers and biodegradable plastics, or evaluating the options for switching from traditional plastics to biopolymers. Topics covered include preparation, fabrication, applications and recycling (including biodegradability and compostability). Applications in key areas such as films, coatings controlled release and tissue engineering are discussed. Dr Ebnesajjad provides readers with an in-depth reference for the plastics industry – material suppliers and processors, bio-polymer producers, bio-polymer processors and fabricators – and for industry sectors utilizing biopolymers – automotive, packaging, construction, wind turbine manufacturers, film manufacturers, adhesive and coating industries, medical device manufacturers, biomedical engineers, and the recycling industry. Essential information and practical guidance for engineers and scientists working with bioplastics, or evaluating a migration to bioplastics. Includes key published material on biopolymers, updated specifically for this Handbook, and new material including coverage of PLA and Tissue Engineering Scaffolds. Coverage of materials and applications together in one handbook enables engineers and scientists to make informed design decisions.
