Glass Formulation Development for the Vitrification of Oak Ridge Tank Waste
Glass Formulation Development for the Vitrification of Oak Ridge Tank Waste

Author:

Publisher:

Published: 1998

Total Pages: 6

ISBN-13:

DOWNLOAD EBOOK

Radioactive waste from four different Oak Ridge tank farms will be immobilized. The sludges in these tanks contain transuranic radionuclides and RCRA metals at levels which will make the final waste from both TRU and mixed. The final waste form in the immobilization of these sludges may be glass because of its ability to accept a wide variety of components into its network structure. The results of these tests indicate that sufficient waste loadings can be obtained in the glass to significantly reduce the waste volume. This paper will present the results of the glass formulation efforts.

Research Needs for High-Level Waste Stored in Tanks and Bins at U.S. Department of Energy Sites
Research Needs for High-Level Waste Stored in Tanks and Bins at U.S. Department of Energy Sites

Author: National Research Council

Publisher: National Academies Press

Published: 2001-10-05

Total Pages: 146

ISBN-13: 0309075653

DOWNLOAD EBOOK

The United States Department of Energy (DOE) has approximately 400 million liters (100 million gallons) of liquid high-level waste (HLW) stored in underground tanks and approximately 4,000 cubic meters of solid HLW stored in bins. The current DOE estimate of the cost of converting these liquid and solid wastes into stable forms for shipment to a geological repository exceeds $50 billion to be spent over several decades (DOE, 2000). The Committee on Long-Term Research Needs for Radioactive High-Level Waste at Department of Energy Sites was appointed by the National Research Council (NRC) to advise the Environmental Management Science Program (EMSP) on a long-term research agenda addressing the above problems related to HLW stored in tanks and bins at DOE sites.

Enhanced LAW Glass Correlation - Phase 1
Enhanced LAW Glass Correlation - Phase 1

Author:

Publisher:

Published: 2016

Total Pages: 199

ISBN-13:

DOWNLOAD EBOOK

About 50 million gallons of high-level mixed waste is currently stored in underground tanks at the United States Department of Energy's (DOE's) Hanford site in the State of Washington. The Hanford Tank Waste Treatment and Immobilization Plant (WTP) will provide DOE's Office of River Protection (ORP) with a means of treating this waste by vitrification for subsequent disposal. The tank waste will be separated into low- and high-activity waste fractions, which will then be vitrified respectively into Immobilized Low Activity Waste (ILAW) and Immobilized High Level Waste (IHLW) products. The ILAW product will be disposed in an engineered facility on the Hanford site while the IHLW product is designed for acceptance into a national deep geological disposal facility for high-level nuclear waste. The ILAW and IHLW products must meet a variety of requirements with respect to protection of the environment before they can be accepted for disposal. Acceptable glass formulations for vitrification of Hanford low activity waste (LAW) must meet a variety of product quality, processability, and waste loading requirements. To this end, The Vitreous State Laboratory (VSL) at The Catholic University of America (CUA) developed and tested a number of glass formulations during Part A, Part B1 and Part B2 of the WTP development program. The testing resulted in the selection of target glass compositions for the processing of eight of the Phase I LAW tanks. The selected glass compositions were tested at the crucible scale to confirm their compliance with ILAW performance requirements. Duramelter 100 (DM100) and LAW Pilot Melter tests were then conducted to demonstrate the viability of these glass compositions for LAW vitrification at high processing rates.

Radioactive Waste Forms for the Future
Radioactive Waste Forms for the Future

Author: Werner Lutze

Publisher: North Holland

Published: 1988

Total Pages: 802

ISBN-13:

DOWNLOAD EBOOK

This volume presents a compilation of important information on the full range of radioactive waste forms that have been developed, or at least suggested, for the incorporation of high-level nuclear waste. Many of the results were published in the ''gray literature'' of final reports of national laboratories or in various, generally less available, proceedings volumes. This is the first publication to draw information on nuclear waste forms for high-level wastes together into a single volume. Although borosilicate glass has become the standard waste form, additional research in this compound is still necessary. With improved technology (particularly processing technologies) and with a more detailed knowledge of repository conditions, glasses and second generation waste forms with improved performance properties can be developed. Sustained research programs on nuclear waste form development will yield results that can only add to public confidence and the final, safe disposal of nuclear waste. The aim of this volume is to provide a 'spring board' for these future research efforts. A detailed presentation is given on the properties and performance of non-crystalline waste forms (borosilicate glass, sintered glass, and lead-iron phosphate glass), and crystalline waste forms (Synroc, tailored ceramics, TiO 2 - ceramic matrix, glass-ceramics and FUETAP concrete). A chapter on Novel Waste Forms reviews a number of methods that warrant further development because of their potential superior performance and unique applications. The final chapter includes a tabulated comparison of important waste form properties and an extended discussion on the corrosion process and radiation damage effects for each waste form. Of particular interest is a performance assessment of nuclear waste borosilicate glass and the crystalline ceramic Synroc. This is the first detailed attempt to compare these two important waste forms on the basis of their materials properties. The discussion emphasizes the difficulties in making such a comparison and details the types of data that are required. Each chapter has been written by an expert and includes a current compilation of waste form properties with an extensive list of references. This volume will provide a stimulus for future research as well as useful reference material for scientists working in the field of nuclear waste disposal and materials science.