Annotation The measurement of performance during an airplane's flight, testing is one of the more important tasks to be accomplished during its development as it impacts on both the airplane's safety and its marketability. This book discusses performance for both propeller-driven and jet aircraft.
Calculation and optimisation of flight performance is required to design or select new aircraft, efficiently operate existing aircraft, and upgrade aircraft. It provides critical data for aircraft certification, accident investigation, fleet management, flight regulations and safety. This book presents an unrivalled range of advanced flight performance models for both transport and military aircraft, including the unconventional ends of the envelopes. Topics covered include the numerical solution of supersonic acceleration, transient roll, optimal climb of propeller aircraft, propeller performance, long-range flight with en-route stop, fuel planning, zero-gravity flight in the atmosphere, VSTOL operations, ski jump from aircraft carrier, optimal flight paths at subsonic and supersonic speed, range-payload analysis of fixed- and rotary wing aircraft, performance of tandem helicopters, lower-bound noise estimation, sonic boom, and more.This book will be a valuable text for undergraduate and post-graduate level students of aerospace engineering. It will also be an essential reference and resource for practicing aircraft engineers, aircraft operations managers and organizations handling air traffic control, flight and flying regulations, standards, safety, environment, and the complex financial aspects of flying aircraft. - Unique coverage of fixed and rotary wing aircraft in a unified manner, including optimisation, emissions control and regulation. - Ideal for students, aeronautical engineering capstone projects, and for widespread professional reference in the aerospace industry. - Comprehensive coverage of computer-based solution of aerospace engineering problems; the critical analysis of performance data; and case studies from real world engineering experience. - Supported by end of chapter exercises
This intriguing book breaks new ground on an emerging subject that has attracted considerable attention: the use of unmanned micro air vehicles (MAVs) to conduct special, limited duration missions. Significant advances in the miniaturization of electronics make it now possible to use vehicles of this type in a detection or surveillance role to carry visual, acoustic, chemical, or biological sensors. Interestingly, many of the advances in MAV technology can be traced directly to annual student competitions, begun in the late 1990s, that use relatively low cost model airplane equipment. The wide variety of configurations entered in these contests and their ongoing success has led to a serious interest in testing the performance of these vehicles for adaptation to practical applications. MAVs present aerodynamic issues unique to their size and the speeds at which they operate. Of particular concern is the aerodynamic efficiency of various fixed wing concepts. Very little information on the performance of low aspect ratio wing planforms existed for this flight regime until MAVs became of interest and the proliferation of fixed wing designs has since expanded. This book presents a brief history of unmanned air vehicles and offers elements of aerodynamics for low aspect ratio wings. Propulsion and the basic concepts for fixed wing MAV design are presented, as is a method for autopilot integration. Three different wing configurations are presented in a series of step-by-step case studies. The goal of the book is to assist both working professionals and students to design, build, and fly MAVs, and do so in a way that will advance the state of the art and lead to the development of even smalleraircraft.
Small Unmanned Fixed-wing Aircraft Design is the essential guide to designing, building and testing fixed wing UAVs (or drones). It deals with aircraft from two to 150 kg in weight and is based on the first-hand experiences of the world renowned UAV team at the UK’s University of Southampton. The book covers both the practical aspects of designing, manufacturing and flight testing and outlines and the essential calculations needed to underpin successful designs. It describes the entire process of UAV design from requirements definition to configuration layout and sizing, through preliminary design and analysis using simple panel codes and spreadsheets to full CFD and FEA models and on to detailed design with parametric CAD tools. Its focus is on modest cost approaches that draw heavily on the latest digital design and manufacturing methods, including a strong emphasis on utilizing off-the-shelf components, low cost analysis, automated geometry modelling and 3D printing. It deliberately avoids a deep theoretical coverage of aerodynamics or structural mechanics; rather it provides a design team with sufficient insights and guidance to get the essentials undertaken more pragmatically. The book contains many all-colour illustrations of the dozens of aircraft built by the authors and their students over the last ten years giving much detailed information on what works best. It is predominantly aimed at under-graduate and MSc level student design and build projects, but will be of interest to anyone engaged in the practical problems of getting quite complex unmanned aircraft flying. It should also appeal to the more sophisticated aero-modeller and those engaged on research based around fixed wing UAVs.
Few technological advances have affected the lives and dreams of individuals and the operations of companies and governments as much as the continuing development of flight. From space exploration to package transport, from military transport to passenger helicopter use, from passenger jumbo jets to tilt-rotor commuter planes, the future of flying is still rapidly developing. The essays in this volume survey the state of progress along several fronts of this constantly evolving frontier. Five eminent authorities assess prospects for the future of rotary-wing aircraft, large passenger aircraft, commercial aviation, manned spaceflight, and defense aerospace in the post-Cold War era.
This title reports on the latest research in the area of aerodynamic efficency of various fixed-wing, flapping wing, and rotary wing concepts. It presents the progress made by over fifty active researchers in the field.
An updated and expanded new edition of an authoritative book on flight dynamics and control system design for all types of current and future fixed-wing aircraft Since it was first published, Flight Dynamics has offered a new approach to the science and mathematics of aircraft flight, unifying principles of aeronautics with contemporary systems analysis. Now updated and expanded, this authoritative book by award-winning aeronautics engineer Robert Stengel presents traditional material in the context of modern computational tools and multivariable methods. Special attention is devoted to models and techniques for analysis, simulation, evaluation of flying qualities, and robust control system design. Using common notation and not assuming a strong background in aeronautics, Flight Dynamics will engage a wide variety of readers, including aircraft designers, flight test engineers, researchers, instructors, and students. It introduces principles, derivations, and equations of flight dynamics as well as methods of flight control design with frequent reference to MATLAB functions and examples. Topics include aerodynamics, propulsion, structures, flying qualities, flight control, and the atmospheric and gravitational environment. The second edition of Flight Dynamics features up-to-date examples; a new chapter on control law design for digital fly-by-wire systems; new material on propulsion, aerodynamics of control surfaces, and aeroelastic control; many more illustrations; and text boxes that introduce general mathematical concepts. Features a fluid, progressive presentation that aids informal and self-directed study Provides a clear, consistent notation that supports understanding, from elementary to complicated concepts Offers a comprehensive blend of aerodynamics, dynamics, and control Presents a unified introduction of control system design, from basics to complex methods Includes links to online MATLAB software written by the author that supports the material covered in the book