"The first comprehensive book on fine particle synthesis that ranges from fundamental principles to the most advanced concepts, highlighting mondispersed particles from nanometers to micrometers. Describes mechanisms of formation and specific characteristics of each family of compounds while identifying problems and proposing solutions. Contains subsections that analyze growth processes, characterize products, and delineate physical and chemical results based on causality."
The aim of this volume is to advance the understanding of the fundamental properties of fine magnetic particles and to discuss the latest developments from both the theoretical and experimental viewpoints, with special emphasis being placed on the applications in different branches of science and technology. All aspects of fine magnetic particles are covered in the 46 papers. The topics are remarkably interdisciplinary covering theory, materials preparation, structural characterization, optical and electrical properties, magnetic properties studied by different techniques and applications. Some new fundamental properties, such as quantum tunneling and transverse fluctuations of magnetic moments are also explored. Research workers involved in these aspects of materials technology will find this book of great interest.
This book was written with several objectives in mind: 1. To share with as many scientists and engineers as possible the intriguing scientific aspects of ultra-fine particles (UFPs) and to show their potential as new materials. 2. Entice such researchers to participate in the development of this emerging field. 3. To publicize the achievements of the Ultra-Fine Particle Project, which was carried out under the auspices of the Exploratory Research for Advanced Technology program (ERATO). In addition to the members of the Ultra-Fine Particle Project, contributions from other pioneers in this field are included. To achieve the first objective described above, the uniformity of the contents and focus on a single central theme have been sacrificed somewhat to provide a broad coverage. It is expected that the reader can discover an appropriate topic for further development of new materials and basic technology by reading selected sections of this book. Alternately, one may gain an overview of this new field by reviewing the entire book, which can potentially lead to new directions in the development of UFPs.
Particle technology is a term used to refer to the science and technology related to the handling and processing of particles and powders. The production of particulate materials, with controlled properties tailored to subsequent processing and applications, is of major interest to a wide range of industries, including chemical and process, food, pharmaceuticals, minerals and metals companies and the handling of particles in gas and liquid solutions is a key technological step in chemical engineering. This textbook provides an excellent introduction to particle technology with worked examples and exercises. Based on feedback from students and practitioners worldwide, it has been newly edited and contains new chapters on slurry transport, colloids and fine particles, size enlargement and the health effects of fine powders. Topics covered include: Characterization (Size Analysis) Processing (Granulation, Fluidization) Particle Formation (Granulation, Size Reduction) Storage and Transport (Hopper Design, Pneumatic Conveying, Standpipes, Slurry Flow) Separation (Filtration, Settling, Cyclones) Safety (Fire and Explosion Hazards, Health Hazards) Engineering the Properties of Particulate Systems (Colloids, Respirable Drugs, Slurry Rheology) This book is essential reading for undergraduate students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students in other branches of engineering, applied chemistry, physics, pharmaceutics, mineral processing and metallurgy. Practitioners in industries in which powders are handled and processed may find it a useful starting point for gaining an understanding of the behavior of particles and powders. Review of the First Edition taken from High Temperatures - High pressures 1999 31 243 – 251 "..This is a modern textbook that presents clear-cut knowledge. It can be successfully used both for teaching particle technology at universities and for individual study of engineering problems in powder processing."
This volume contains the proceedings of an international symposium organised by the Metallurgical Society of the Canadian Institute of Mining and Metallurgy. The aims of the symposium were to discuss fundamental and practical aspects of the technology for the production of fine inorganic particles for the metals, industrial minerals and advanced ceramics sectors, to highlight particle characterization methods and developments, and to review major advances in the processing and extractive metallurgy of finely-sized minerals. 96 conference papers by authors from 19 countries addressed such topics as particle morphology and size analysis, physical and chemical methods for producing fine particles, processing of minerals using gravity, magnetic and electrostatic separation, flotation and flocculation, phase separation involving fine particles, and the hydrometallurgy and pyroprocessing of fine particles. This book will be of interest to mineral processing scientists and engineers, ceramicists, extractive metallurgists and chemical engineers, who are faced with the increasing significance of inorganic fine particles either as valuable products or as materials to be treated in mineral processing systems.
"This publication represents the views and expert opinions of an IARC Working Group on the Evaluation of Carcinogenic Risk to Humans, which met in Lyon, 8-15 October 2013."
The main objective of these updated global guidelines is to offer health-based air quality guideline levels, expressed as long-term or short-term concentrations for six key air pollutants: PM2.5, PM10, ozone, nitrogen dioxide, sulfur dioxide and carbon monoxide. In addition, the guidelines provide interim targets to guide reduction efforts of these pollutants, as well as good practice statements for the management of certain types of PM (i.e., black carbon/elemental carbon, ultrafine particles, particles originating from sand and duststorms). These guidelines are not legally binding standards; however, they provide WHO Member States with an evidence-informed tool, which they can use to inform legislation and policy. Ultimately, the goal of these guidelines is to help reduce levels of air pollutants in order to decrease the enormous health burden resulting from the exposure to air pollution worldwide.
Fine Particles: Aerosol Generation, Measurement, Sampling, and Analysis is a collection of technical papers presented at the Symposium on Fine Particles held in Minneapolis, Minnesota, on May 28-30, 1975. The symposium aims to explore the developments in instrumentation and experimental techniques for aerosol studies. This book is organized into four parts encompassing 34 chapters that focus on fine particles below about 3.5 μm in diameter. Part I presents the research and development in Europe and Japan on fine particles and aerosols, as well as the aerosol standards development work at the Particle Technology Laboratory, University of Minnesota. This part also includes calibration studies on condensation nuclei counters and the diffusion battery. Significant chapters in Part II are devoted to the common techniques for generation of aerosols of various sizes, from fine particles to monodisperse aerosols. This part further looks into the equipment limitations and problems in producing fine particle aerosols for life testing air cleaning systems and for weather modification experimentation. Part III describes the techniques and equipment used for size-selective aerosol sampling in terms of the design principles applied, the correspondence between design and performance of specific samplers, their applicability to field conditions, and their ability to satisfy sampler acceptance criteria. Part IV deals first with the methods for determination of aerosol properties, including their optical, electrical, and spectral properties. Other chapters examine the principles, mode of operation, and application of processes and instruments for aerosol studies.
The book covers the three largest sources of particulate matter pollution in five chapters. These sources constitute three of the top ten public health problems in the world today and far outstrip any other environmental health threats in terms of health impact. The book begins with indoor solid fuel combustion for cooking in lower income countries and tells the story of how this problem was identified and recent efforts to eliminate it. The book next looks at tobacco smoking and second hand smoke, again reviewing the history of how these problems were identified scientifically and the fierce industry push back against the science. The last two chapters cover ambient particulate matter in the outdoor air. They address fine and ultrafine particles, describing the pioneering work on fine PM, the subsequent industry attacks on the scientists and then the emerging interest and concern about ultrafine particles, an area of research in which the author has participated. This book is geared towards non-scientists, including high school and college students.
Over the past thirty years, the liquefaction of sand containing a small amount of fine particles has become an engaging topic in the geotechnical community. Indeed, a great variety of field investigations revealed that the real liquefied soils are mainly composed of a host sand matrix and a small fraction of plastic or non-plastic fines. In this context, several series of monotonic and cyclic triaxial tests were performed to clarify the influence of these fine particles on the development of sand liquefaction. To get closer to in situ conditions, 1g shaking table tests were carried out with two different-sized model soil containers. The first one, small size, was essentially used to check the reconstitution and the saturation method. The second one, very large size, was manufactured to explore the sand liquefaction behaviour during base shaking in an almost actual engineering size. To numerically reproduce the sand liquefaction behaviour, the Dafalias model has been taken as an example and its input parameters were calibrated by an artificial intelligence method. An in-depth analysis of the proposed method was done with the elastoplastic theory.
