Fault Diagnosis and Estimation of Dynamical Systems with Application to Gas Turbines

Fault Diagnosis and Estimation of Dynamical Systems with Application to Gas Turbines

Author: Esmaeil Naderi

Publisher:

Published: 2017

Total Pages: 253

ISBN-13:

DOWNLOAD EBOOK

This thesis contributes and provides solutions to the problem of fault diagnosis and estimation from three different perspectives which are i) fault diagnosis of nonlinear systems using nonlinear multiple model approach, ii) inversion-based fault estimation in linear systems, and iii) data-driven fault diagnosis and estimation in linear systems. The above contributions have been demonstrated to the gas turbines as one of the most important engineering systems in the power and aerospace industries. The proposed multiple model approach is essentially a hierarchy of nonlinear Kalman filters utilized as detection filters. A nonlinear mathematical model for a gas turbines is developed and verified. The fault vector is defined using the Gas Path Analysis approach. The nonlinear Kalman filters that correspond to the defined single or concurrent fault modes provide the conditional probabilities associated with each fault mode using the Bayes' law. The current fault mode is then determined based on the maximum probability criteria. The performance of both Extended Kalman Filters (EKF) and Unscented Kalman Filters (UKF) are investigated and compared which demonstrates that the UKF outperforms the EKF for this particular application.The problem of fault estimation is increasingly receiving more attention due to its practical importance. Fault estimation is closely related to the problem of linear systems inversion. This thesis includes two contributions for the stable inversion of non-minimum phase systems. First, a novel methodology is proposed for direct estimation of unknown inputs by using only measurements of either minimum or non-minimum phase systems as well as systems with transmission zeros on the unit circle. A dynamic filter is then identified whose poles coincide with the transmission zeros of the system. A feedback is then introduced to stabilize the above filter dynamics as well as provide an unbiased estimation of the unknown input. The methodology is then applied to the problem of fault estimation and has been shown that the proposed inversion filter is unbiased for certain categories of faults. Second, a solution for unbiased reconstruction of general inputs is proposed. It is based on designing an unknown input observer (UIO) that provides unbiased estimation of the minimum phase states of the system. The reconstructed minimum phase states serve then as inputs for reconstruction of the non-minimum phase states. The reconstruction error for non-minimum phase states exponentially decrease as the estimation delay is increased. Therefore, an almost perfect reconstruction can be achieved by selecting the delay to be sufficiently large. The proposed inversion scheme is then applied to the output-tracking control problem. An important practical challenge is the fact that engineers rarely have a detailed and accurate mathematical model of complex engineering systems such as gas turbines. Consequently, one can find a trend towards data-driven approaches in many disciplines, including fault diagnosis. In this thesis, explicit state-space based fault detection, isolation and estimation filters are proposed that are directly identified from only the system input-output (I/O) measurements and through the system Markov parameters. The proposed procedures do not involve a reduction step and do not require identification of the system extended observability matrix or its left null space. Therefore, the performance of the proposed filters is directly connected to and linearly dependent on the errors in the Markov parameters estimation process. The estimation error dynamics is then derived in terms of the Markov parameters identification errors and directly synthesized from the healthy system I/O data. Consequently, the estimation errors have been effectively compensated for. The proposed data-driven scheme requires the persistently exciting condition for healthy input data which is not practical for certain real life applications and in particular to gas turbine engines. To address this issue, a robust methodology for Markov parameters estimation using frequency response data is developed. Finally, the performance of the proposed data-driven approach is comprehensively evaluated for the fault diagnosis and estimation problems in the gas turbine engines.


Gas Turbine Diagnostics

Gas Turbine Diagnostics

Author: Ranjan Ganguli

Publisher: CRC Press

Published: 2012-12-13

Total Pages: 255

ISBN-13: 146650272X

DOWNLOAD EBOOK

Widely used for power generation, gas turbine engines are susceptible to faults due to the harsh working environment. Most engine problems are preceded by a sharp change in measurement deviations compared to a baseline engine, but the trend data of these deviations over time are contaminated with noise and non-Gaussian outliers. Gas Turbine Diagnostics: Signal Processing and Fault Isolation presents signal processing algorithms to improve fault diagnosis in gas turbine engines, particularly jet engines. The algorithms focus on removing noise and outliers while keeping the key signal features that may indicate a fault. The book brings together recent methods in data filtering, trend shift detection, and fault isolation, including several novel approaches proposed by the author. Each method is demonstrated through numerical simulations that can be easily performed by the reader. Coverage includes: Filters for gas turbines with slow data availability Hybrid filters for engines equipped with faster data monitoring systems Nonlinear myriad filters for cases where monitoring of transient data can lead to better fault detection Innovative nonlinear filters for data cleaning developed using optimization methods An edge detector based on gradient and Laplacian calculations A process of automating fault isolation using a bank of Kalman filters, fuzzy logic systems, neural networks, and genetic fuzzy systems when an engine model is available An example of vibration-based diagnostics for turbine blades to complement the performance-based methods Using simple examples, the book describes new research tools to more effectively isolate faults in gas turbine engines. These algorithms may also be useful for condition and health monitoring in other systems where sharp changes in measurement data indicate the onset of a fault.


Advances in Asset Management and Condition Monitoring

Advances in Asset Management and Condition Monitoring

Author: Andrew Ball

Publisher: Springer Nature

Published: 2020-08-27

Total Pages: 1566

ISBN-13: 3030577457

DOWNLOAD EBOOK

This book gathers select contributions from the 32nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2019), held at the University of Huddersfield, UK in September 2019, and jointly organized by the University of Huddersfield and COMADEM International. The aim of the Congress was to promote awareness of the rapidly emerging interdisciplinary areas of condition monitoring and diagnostic engineering management. The contents discuss the latest tools and techniques in the multidisciplinary field of performance monitoring, root cause failure modes analysis, failure diagnosis, prognosis, and proactive management of industrial systems. There is a special focus on digitally enabled asset management and covers several topics such as condition monitoring, maintenance, structural health monitoring, non-destructive testing and other allied areas. Bringing together expert contributions from academia and industry, this book will be a valuable resource for those interested in latest condition monitoring and asset management techniques.


Gas Turbines Modeling, Simulation, and Control

Gas Turbines Modeling, Simulation, and Control

Author: Hamid Asgari

Publisher: CRC Press

Published: 2015-10-16

Total Pages: 214

ISBN-13: 1498726631

DOWNLOAD EBOOK

Gas Turbines Modeling, Simulation, and Control: Using Artificial Neural Networks provides new approaches and novel solutions to the modeling, simulation, and control of gas turbines (GTs) using artificial neural networks (ANNs). After delivering a brief introduction to GT performance and classification, the book:Outlines important criteria to consi


Application of a Bank of Kalman Filters for Aircraft Engine Fault Diagnostics

Application of a Bank of Kalman Filters for Aircraft Engine Fault Diagnostics

Author:

Publisher:

Published: 2003

Total Pages: 18

ISBN-13:

DOWNLOAD EBOOK

In this paper, a bank of Kalman filters is applied to aircraft gas turbine engine sensor and actuator fault detection and isolation (FDI) in conjunction with the detection of component faults. This approach uses multiple Kalman filters, each of which is designed for detecting a specific sensor or actuator fault. In the event that a fault does occur, all filters except the one using the correct hypothesis will produce large estimation errors, thereby isolating the specific fault. In the meantime, a set of parameters that indicate engine component performance is estimated for the detection of abrupt degradation. The proposed FDI approach is applied to a nonlinear engine simulation at nominal and aged conditions, and the evaluation results for various engine faults at cruise operating conditions are given. The ability of the proposed approach to reliably detect and isolate sensor and actuator faults is demonstrated. (7 tables, 4 figures, 17 refs.).


Fault Diagnosis of Hybrid Systems with Applications to Gas Turbine Engines

Fault Diagnosis of Hybrid Systems with Applications to Gas Turbine Engines

Author: Rasul Mohammadi

Publisher:

Published: 2009

Total Pages: 0

ISBN-13:

DOWNLOAD EBOOK

Stringent reliability and maintainability requirements for modern complex systems demand the development of systematic methods for fault detection and isolation. Many of such complex systems can be modeled as hybrid automata. In this thesis, a novel framework for fault diagnosis of hybrid automata is presented. Generally, in a hybrid system, two types of sensors may be available, namely: continuous sensors supplying continuous-time readings (i.e., real numbers) and threshold sensitive (discrete) sensors supplying discrete outputs (e.g., level high and pressure low). It is assumed that a bank of residual generators (detection filters) designed based on the continuous model of the plant is available. In the proposed framework, each residual generator is modeled by a Discrete-Event System (DES). Then, these DES models are integrated with the DES model of the hybrid system to build an Extended DES model. A "hybrid" diagnoser is then constructed based on the extended DES model. The "hybrid" diagnoser effectively combines the readings of discrete sensors and the information supplied by residual generators (which is based on continuous sensors) to determine the health status of the hybrid system. The problem of diagnosability of failure modes in hybrid automata is also studied here. A notion of failure diagnosability in hybrid automata is introduced and it is shown that for the diagnosability of a failure mode in a hybrid automaton, it is sufficient that the failure mode be diagnosable in the extended DES model developed for representing the hybrid automaton and residual generators. The diagnosability of failure modes in the case that some residual generators produce unreliable outputs in the form of false alarm or false silence signals is also investigated. Moreover, the problem of isolator (residual generator) selection is examined and approaches are developed for computing a minimal set of isolators to ensure the diagnosability of failure modes. The proposed hybrid diagnosis approach is employed for investigating faults in the fuel supply system and the nozzle actuator of a single-spool turbojet engine with an afterburner. A hybrid automaton model is obtained for the engine. A bank of residual generators is also designed, and an extended DES is constructed for the engine. Based on the extended DES model, a hybrid diagnoser is constructed and developed. The faults diagnosable by a purely DES diagnoser or by methods based on residual generators alone are also diagnosable by the hybrid diagnoser. Moreover, we have shown that there are faults (or groups of faults) in the fuel supply system and the nozzle actuator that can be isolated neither by a purely DES diagnoser nor by methods based on residual generators alone. However, these faults (or groups of faults) can be isolated if the hybrid diagnoser is used.


Gas Turbine Theory

Gas Turbine Theory

Author: G.F.C. Rogers

Publisher: Pearson Higher Ed

Published: 2017-06-07

Total Pages: 625

ISBN-13: 1292093137

DOWNLOAD EBOOK

When the First Edition of this book was written in 1951, the gas turbine was just becoming established as a powerplant for military aircraft. It took another decade before the gas turbine was introduced to civil aircraft, and this market developed so rapidly that the passenger liner was rendered obsolete. Other markets like naval propulsion, pipeline compression and electrical power applications grew steadily. In recent years the gas turbine, in combination with the steam turbine, has played an ever-increasing role in power generation. Despite the rapid advances in both output and efficiency, the basic theory of the gas turbine has remained unchanged. The layout of this new edition is broadly similar to the original, but greatly expanded and updated, comprising an outline of the basic theory, aerodynamic design of individual components, and the prediction of off-design performance. The addition of a chapter devoted to the mechanical design of gas turbines greatly enhances the scope of the book. Descriptions of engine developments and current markets make this book useful to both students and practising engineers.


Proceedings of the 6th International Conference on Electrical, Control and Computer Engineering

Proceedings of the 6th International Conference on Electrical, Control and Computer Engineering

Author: Zainah Md. Zain

Publisher: Springer Nature

Published: 2022-03-08

Total Pages: 1148

ISBN-13: 9811686904

DOWNLOAD EBOOK

This book presents the proceedings of the 6th International Conference on Electrical, Control and Computer Engineering (InECCE 2021), held in Kuantan, Pahang, Malaysia, on 23 August 2021. The topics covered are sustainable energy, power electronics and drives and power engineering including distributed/renewable generation, power system optimization, artificial/computational intelligence, smart grid, power system protection and machine learning energy management and conservation. The book showcases some of the latest technologies and applications developed to solve local energy and power problems in order to ensure continuity, reliability and security of electricity for future generations. It also links topics covered the sustainable developed goals (SDGs) areas outlined by the United Nation for global sustainability. The book will appeal to professionals, scientists and researchers with experience in industry.