This International Institute of Welding (IIW) report was presented at the 52nd Annual Assembly in Lisbon in June 1999. It contains recommendations representing a consensus on international best practice, focusing on a 'hot spot stress' approach.A wide range of joint types is covered, the new fatigue design curve for both RHS and CHS is dealt with and detailed values for stress concentration factors are provided.The purpose of this current IIW document is to serve both as an International Standards Organisation (ISO) draft specification and as a model standard for national and regional specifications worldwide.The Recommendations (Part one) and Commentary (Part two) were edited by Dr X-L Zhao of Monash University, Australia and Professor J A Packer of the University of Toronto, Canada.
This book provides a basis for the design and analysis of welded components that are subjected to fluctuating forces, to avoid failure by fatigue. It is also a valuable resource for those on boards or commissions who are establishing fatigue design codes. For maximum benefit, readers should already have a working knowledge of the basics of fatigue and fracture mechanics. The purpose of designing a structure taking into consideration the limit state for fatigue damage is to ensure that the performance is satisfactory during the design life and that the survival probability is acceptable. The latter is achieved by the use of appropriate partial safety factors. This document has been prepared as the result of an initiative by Commissions XIII and XV of the International Institute of Welding (IIW).
The weld toe is a primary source of fatigue cracking because of the severity of the stress concentration it produces. Weld toe improvement can increase the fatigue strength of new structures significantly. It can also be used to repair or upgrade existing structures. However, in practice there have been wide variations in the actual improvements in fatigue strength achieved. Based on an extensive testing programme organised by the IIW, this report reviews the main methods for weld toe improvement to increase fatigue strength: burr grinding, TIG dressing and hammer and needle peening. The report provides specifications for the practical use of each method, including equipment, weld preparation and operation. It also offers guidance on inspection, quality control and training as well as assessments of fatigue strength and thickness effects possible with each technique. IIW recommendations on methods for improving the fatigue strength of welded joints will allow a more consistent use of these methods and more predictable increases in fatigue strength. Provides specifications for the practical use of each weld toe method, including equipment, weld preparation and operation Offers guidance on inspection, quality control and training, as well as assessments of fatigue strength and thickness effects possible with each technique This report will allow a more consistent use of these methods and more predictable increases in fatigue strength
This book provides background and guidance on the use of the structural hot-spot stress approach to fatigue analysis. The book also offers Design S-N curves for use with the structural hot-spot stress for a range of weld details, and presents parametric formulas for calculating stress increases due to misalignment and structural discontinuities. Highlighting the extension to structures fabricated from plates and non-tubular sections. The structural hot-spot stress approach focuses on cases of potential fatigue cracking from the weld toe and it has been in use for many years in tubular joints. Following an explanation of the structural hot-spot stress, its definition and its relevance to fatigue, the book describes methods for its determination. It considers stress determination from both finite element analysis and strain gauge measurements, and emphasizes the use of finite element stress analysis, providing guidance on the choice of element type and size for use with either solid or shell elements. Lastly, it illustrates the use of the recommendations in four case studies involving the fatigue assessment of welded structures using the structural hot-spot stress
This volume contains the Kurobane lecture and proceedings of the Tenth International Symposium on Tubular Structures - ISTS10, held in Madrid, Spain, 18-20 September 2003. The ISTS10 provides a platform for the presentation and discussion of seventy-three lectures covering themes including: bridges; roofs; design aspects and case studies; static joint behaviour; fatigue; members; beam-column connections; finite element methods; concrete filled tubes; trusses and frames; cast nodes; and behaviour of tubular structures under fire. This book provides a useful reference work for architects, civil and mechanical engineers, designers, manufacturers and contractors involved with tubular structures.
This topical book contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the "11th International Symposium and IIW International Conference on Tubular Structures". The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal showcase for manufactured tubing and the prime international forum for discussion of research, developments and applications in this field. Various key and emerging subjects in the field of hollow structural sections are covered, such as: novel applications and case studies, static and fatigue behaviour of connections/joints, concrete-filled and composite tubular members, earthquake resistance, specification and code developments, material properties and structural reliability, impact resistance and brittle fracture, fire resistance, casting and fabrication innovations. Research and development issues presented in this book are applicable to buildings, bridges, offshore structures, entertainment rides, cranes, towers and various mechanical and agricultural equipment. This book is thus a pertinent reference source for architects, civil and mechanical engineers, designers, steel fabricators and contractors, manufacturers of hollow sections or related construction products, trade associations involved with tubing, owners or developers of tubular structures, steel specification committees, academics and research students. The conference presentations herein include two keynote lectures (the International Institute of Welding Houdremont Lecture and the ISTS Kurobane Lecture), plus finalists in the CIDECT Student Papers Competition. The 11th International Symposium and IIW International Conference on Tubular Structures – ISTS11 – took place in Québec City, Canada from August 31 to September 2, 2006.
Tubular Structures XVI contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the 16th International Symposium on Tubular Structures (ISTS16, Melbourne, Australia, 4-6 December 2017). The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal showcase for manufactured tubing and the prime international forum for presentation and discussion of research, developments and applications in this field. Various key and emerging subjects in the field of hollow structural sections are covered, such as: special applications and case studies, static and fatigue behaviour of connections/joints, concrete-filled and composite tubular members and offshore structures, earthquake and dynamic resistance, specification and standard developments, material properties and section forming, stainless and high-strength steel structures, fire, impact and blast response. Research and development issues presented in this topical book are applicable to buildings, bridges, offshore structures, cranes, trusses and towers. Tubular Structures XVI is thus a pertinent reference source for architects, civil and mechanical engineers, designers, steel fabricators and contractors, manufacturers of hollow sections or related construction products, trade associations involved with tubing, owners or developers of tubular structures, steel specification committees, academics and research students all around the world.
This book presents selected contributions from ICMFM XX and the Polish National Conference—KKMP. The XX International Colloquium on Mechanical Fatigue of Metals (ICMFM XX) was organized on 15–17 September 2021, in the Faculty of Mechanical Engineering of the Wroclaw University of Science and Technology, in Wrocław City, Poland, in a remote form. Its aim was to facilitate and encourage the exchange of knowledge and experiences among the different communities involved in both basic and applied research in the field of fatigue of metals, looking at the problem of fatigue from a multiscale perspective, and exploring analytical and numerical simulative approaches, without losing the perspectives of the application. The Polish National Conference—KKMP 2021—was organized remotely with 50–80 prominent international participants from the fracture mechanics community.
Cold formed structural members are being used more widely in routine structural design as the world steel industry moves from the production of hot-rolled section and plate to coil and strip, often with galvanised and/or painted coatings. Steel in this form is more easily delivered from the steel mill to the manufacturing plant where it is usually cold-rolled into open and closed section members.This book not only summarises the research performed to date on cold form tubluar members and connections but also compares design rules in various standards and provides practical design examples.
