Computer-aided Synthesis and Design of Monolithic Microwave GaAs MESFET Amplifiers
Computer-aided Synthesis and Design of Monolithic Microwave GaAs MESFET Amplifiers

Author: Jerome Thomas Dijak

Publisher:

Published: 1983

Total Pages: 370

ISBN-13:

DOWNLOAD EBOOK

The computer-aided procedures for systematic design of lumped and distributed element even-order amplifier matching networks are extended to include odd-order networks. The gain-bandwidth performance of general odd-order networks as well as that of several specific odd-order topologies of special interest are discussed. Practical monolithic input, output, and interstage matching network topologies using both lumped and distributed elements are shown, and the potential for reducing required chip area by using networks of 3rd order in lieu of 4th order is shown for both low-noise and power amplifier examples. Analytical techniques are presented for computing the maximum realizable value of the denominator polynomial constant of odd-order gain functions in both the lumped and distributed element cases for 3rd order networks of arbitrary ripple, bandwidth, minimum insertion loss, and gain slope.

Broadband RF and Microwave Amplifiers
Broadband RF and Microwave Amplifiers

Author: Andrei Grebennikov

Publisher: CRC Press

Published: 2017-07-12

Total Pages: 750

ISBN-13: 1466557397

DOWNLOAD EBOOK

Broadband RF and Microwave Amplifiers provides extensive coverage of broadband radio frequency (RF) and microwave power amplifier design, including well-known historical and recent novel schematic configurations, theoretical approaches, circuit simulation results, and practical implementation strategies. The text begins by introducing two-port networks to illustrate the behavior of linear and nonlinear circuits, explaining the basic principles of power amplifier design, and discussing impedance matching and broadband power amplifier design using lumped and distributed parameters. The book then: Shows how dissipative or lossy gain-compensation-matching circuits can offer an important trade-off between power gain, reflection coefficient, and operating frequency bandwidth Describes the design of broadband RF and microwave amplifiers using real frequency techniques (RFTs), supplying numerous examples based on the MATLAB® programming process Examines Class-E power amplifiers, Doherty amplifiers, low-noise amplifiers, microwave gallium arsenide field-effect transistor (GaAs FET)-distributed amplifiers, and complementary metal-oxide semiconductor (CMOS) amplifiers for ultra-wideband (UWB) applications Broadband RF and Microwave Amplifiers combines theoretical analysis with practical design to create a solid foundation for innovative ideas and circuit design techniques.

Broadband GaAs MESFET Power Amplifier Design Aspects
Broadband GaAs MESFET Power Amplifier Design Aspects

Author: H. A. Willing

Publisher:

Published: 1979

Total Pages: 50

ISBN-13:

DOWNLOAD EBOOK

This report presents design aspects of ultra-wideband GaAs MESFET power amplifiers which are directed to ECM and EW system applications. Fundamental gain-bandwidth limitations are derived for state-of-the-art GaAs MESFET power devices. Broadband designs are developed in the 2- to 18-GHz range using analytical and computer-aided optimization techniques. These designs are based upon small-and large-signal device characterization and modeling. Presented are systematic procedures required to arrive at the final designs. Modeling techniques and their utilization as a tool in achieving optimum performance are described. Included in this report is a discussion of the laboratory methods employed to perform small-and large-signal device characterization and analysis. (Author).

RFIC and MMIC Design and Technology
RFIC and MMIC Design and Technology

Author: I.D. Robertson

Publisher: IET

Published: 2001-11-30

Total Pages: 583

ISBN-13: 0852967861

DOWNLOAD EBOOK

This book gives an in-depth account of GaAs, InP and SiGe, technologies and describes all the key techniques for the design of amplifiers, ranging from filters and data converters to image oscillators, mixers, switches, variable attenuators, phase shifters, integrated antennas and complete monolithic transceivers.

Distributed Power Amplifiers for RF and Microwave Communications
Distributed Power Amplifiers for RF and Microwave Communications

Author: Narendra Kumar

Publisher: Artech House

Published: 2015-06-01

Total Pages: 365

ISBN-13: 1608078329

DOWNLOAD EBOOK

This new resource presents readers with all relevant information and comprehensive design methodology of wideband amplifiers. This book specifically focuses on distributed amplifiers and their main components, and presents numerous RF and microwave applications including well-known historical and recent architectures, theoretical approaches, circuit simulation, and practical implementation techniques. A great resource for practicing designers and engineers, this book contains numerous well-known and novel practical circuits, architectures, and theoretical approaches with detailed description of their operational principles.

Broadband Microwave Amplifiers
Broadband Microwave Amplifiers

Author: Bal S. Virdee

Publisher: Artech House

Published: 2004

Total Pages: 264

ISBN-13: 9781580538930

DOWNLOAD EBOOK

"This authoritative resource offers a complete understanding of state-of-the-art and cutting-edge techniques for designing and fabricating broadband microwave amplifiers. The book covers the complete design cycle, detailing each stage in a practical, hands-on manner." "This comprehensive reference illustrates the formulation of small- and large-signal device models to help professionals accurately simulate amplifier performance, and covers all the practical aspects and circuit components used in fabrication. Engineers find design examples of various types of amplifiers that are applicable in broadband systems such as optical communications, satellite communications, spread-spectrum communications, wireless local area networks, electronic warfare, instrumentation, and phased array radar. The book also provides an in-depth treatment of ultra-broadband microwave amplifiers." --Book Jacket.

Computer Aided Design of Monolithic Microwave and Millimeter Wave Integrated Circuits and Subsystems
Computer Aided Design of Monolithic Microwave and Millimeter Wave Integrated Circuits and Subsystems

Author: Walter H. Ku

Publisher:

Published: 1987

Total Pages: 54

ISBN-13:

DOWNLOAD EBOOK

This final technical report presents results on the computer aided design of monolithic microwave and millimeter wave integrated circuits and subsystems. New results include analytical and computer aided device models of GaAs MESFETs and HEMTs or MODFETs, new synthesis techniques for monolithic feedback and distributed amplifiers and a new nonlinear CAD program for MIMIC called CADNON. This program incorporates the new MESFET and HEMT model and has been successfully applied to the design of monolithic millimeter-wave mixers. Keywords: GaAs MESFETs, HEMTs, MODFETs, Monolithic microwave and Millimeter integrated circuits, MMIC, MIMIC, Computer aided design, and Large-signal device models. (r.h.).