This third edition of a popular textbook is a concise single-volume introduction to the design of structural elements in concrete, steel, timber, masonry, and composites. It provides design principles and guidance in line with both British Standards and Eurocodes, current as of late 2007. Topics discussed include the philosophy of design, basic structural concepts, and material properties. After an introduction and overview of structural design, the book is conveniently divided into sections based on British Standards and Eurocodes.
The second edition of this popular textbook provides, in a single volume, an introduction to the design of structural elements in concrete, steel, timber and masonry. Part One explains the principles and philosophy of design, basic techniques, and structural concepts. Designing in accordance with British Standard codes of practice follows in Part Two, with numerous diagrams and worked examples. In Part Three the Eurocodes are introduced, and their main differences to British codes are explained. Comprehensively revised and updated to comply with the latest British Standards and Eurocodes, the second edition also features a new section on the use and design of composite materials. With an accompanying solutions manual available online, Design of Structural Elements is the ideal course text for students of civil and structural engineering, on degree, HNC and HND courses.
Written to Eurocode 7 and the UK National Annex Updated to reflect the current usage of Eurocode 7, along with relevant parts of the British Standards, Pile Design and Construction Practice, Sixth Edition maintains the empirical correlations of the original—combining practical know how with scientific knowledge —and emphasizing relevant principles and applications of soil mechanics and design. Contractors, geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations can find the most current types of pile, piling equipment, and relevant methods in this latest work. The book summarizes recent changes, including new codified design procedures addressing design parameters and partial safety factors. It also presents several examples, many based on actual problems. Broad and Comprehensive In Its Coverage Contains material applicable to modern computational practice Provides new sections on the construction of micropiles and CFA piles, pile-soil interaction, verification of pile materials, piling for integral bridge abutments, use of polymer stabilising fluids, and more Includes calculations of the resistance of piles to compressive loads, pile groups under compressive loading, piled foundations for resisting uplift and lateral loading, and the structural design of piles and pile groups Covers marine structures, durability of piled foundations, ground investigations, and pile testing Addresses miscellaneous problems such as machinery foundations, underpinning, mining subsidence areas, geothermal piles, and unexploded ordnance Pile Design and Construction Practice, Sixth Edition serves as a comprehensive guide for practicing geotechnical engineers and engineering geologists. This text also works as a resource for piling contractors and graduate students studying geotechnical engineering.
Structural Elements Design Manual: Working With Eurocodes is the structural engineers ‘companion volume’ to the four Eurocodes on the structural use of timber, concrete, masonry and steelwork. For the student at higher technician or first degree level it provides a single source of information on the behaviour and practical design of the main elements of the building structure. With plenty of worked examples and diagrams, it is a useful textbook not only for students of structural and civil engineering, but also for those on courses in related subjects such as architecture, building and surveying whose studies include the design of structural elements. Trevor Draycott the former Buildings and Standards Manager with Lancashire County Council’s Department of Property Services has 50 years experience in the construction industry. For 20 years he was also an associate lecturer in structures at Lancashire Polytechnic, now the University of Central Lancashire in Preston. For many years he served on the Institution of Structural Engineers, North West Branch, professional interview panel and the North West regional committee of the Timber Research and Development Association. Peter Bullman worked for Felix J Samuely and Partners, Taylor Woodrow Construction and Building Design Partnership before joining Bolton Institute, now the University of Bolton, as a lecturer in structural engineering. He has taught structural design on higher technician, degree and postgraduate courses, and has run courses to prepare engineers for the IStructE Chartered Membership examination.
This edition has been fully revised and extended to cover blockwork and Eurocode 6 on masonry structures. This valued textbook:Discusses all aspects of design of masonry structures in plain and reinforced masonry.summarizes materials properties and structural principles as well as describing structure and content of codes.Presents design procedures
This textbook describes the rules for the design of steel and composite building structures according to Eurocodes, covering the structure as a whole, as well as the design of individual structural components and connections. It addresses the following topics: the basis of design in the Eurocodes framework; the loads applied to building structures; the load combinations for the various limit states of design and the main steel properties and steel fabrication methods; the models and methods of structural analysis in combination with the structural imperfections and the cross-section classification according to compactness; the cross-section resistances when subjected to axial and shear forces, bending or torsional moments and to combinations of the above; component design and more specifically the design of components sensitive to instability phenomena, such as flexural, torsional and lateral-torsional buckling (a section is devoted to composite beams); the design of connections and joints executed by bolting or welding, including beam to column connections in frame structures; and alternative configurations to be considered during the conceptual design phase for various types of single or multi-storey buildings, and the design of crane supporting beams. In addition, the fabrication and erection procedures, as well as the related quality requirements and the quality control methods are extensively discussed (including the procedures for bolting, welding and surface protection). The book is supplemented by more than fifty numerical examples that explain in detail the appropriate procedures to deal with each particular problem in the design of steel structures in accordance with Eurocodes. The book is an ideal learning resource for students of structural engineering, as well as a valuable reference for practicing engineers who perform designs on basis of Eurocodes.
Design of Steel-Concrete Composite Bridges to Eurocodes centers on the new design rules incorporated in the EN-versions of the Eurocodes. This book targets students, especially at MSc level, and practicing engineers who need to become familiar with the new design rules incorporated in the EN-versions of the Eurocodes. Its focuses primarily on road bridges, although some information is provided for railway bridges, and presents the material in a concise manner.
In an era of new, composite materials and high-strength concrete, and with an increasing demand for sustainable building technologies, the importance of the role of steel in construction is being challenged.. Nonetheless, steel can successfully be used to refurbish and retrofit historical buildings, as well as being a material of choice for new building structures. Steel can effectively be combined with a variety of other materials to obtain structures which are characterized by a high-performance response under different types of static and dynamic activity. The proceedings contains nine keynote lectures from international experts, and is further divided into five sections: calculation models and methods; studies and advances in design codes; steel and mixed building technology; steel under exceptional actions; and steel in remarkable constructions and refurbishment.
Significantly updated in reference to the latest construction standards and new building types Sustainable design integrated into chapters throughout Over half of the entire book has now been updated since 2015 Over 100,000 copies sold to successive generations of architects and designers This book belongs in every design office. The Metric Handbook is the major handbook of planning and design data for architects and architecture students. Covering basic design data for all the major building types it is the ideal starting point for any project. For each building type, the book gives the basic design requirements and all the principal dimensional data, and succinct guidance on how to use the information and what regulations the designer needs to be aware of. As well as buildings, the Metric Handbook deals with broader aspects of design such as materials, acoustics and lighting, and general design data on human dimensions and space requirements. The Metric Handbook is the unique reference for solving everyday planning problems.
