Embedded Controllers
Embedded Controllers

Author: James Fiore

Publisher:

Published: 2016-04-14

Total Pages: 166

ISBN-13: 9781796854879

DOWNLOAD EBOOK

This is not your average Arduino book! Instead, Embedded Controllers Using C and Arduino is designed for those who wish to "get under the hood" and use the Arduino environment as a launching pad into the world of embedded controller programming and interfacing. The first half of the text offers an extensive explanation of the C programming language. The second half focuses on the Arduino open source environment. Instead of relying solely on the standard Arduino library functions, alternate efficient and time tested techniques are examined alongside them. Detailed descriptions of the Atmel 328p controller used in the Arduino Uno lend depth to the discussion of the associated software calls that control it. The source code of many of the most widely used library functions is examined and alternative techniques are explored. This enables the programmer to extend their utility beyond the Arduino and to make use of other embedded development systems. This is the print version of the on-line OER.

Embedded Controllers Using C and Arduino
Embedded Controllers Using C and Arduino

Author: James Fiore

Publisher:

Published: 2016-03-21

Total Pages: 100

ISBN-13: 9781796836226

DOWNLOAD EBOOK

This is the companion laboratory manual to accompany Embedded Controllers Using C and Arduino. The fifteen lab exercises range from introductory C programming concepts to interesting and useful device applications. Exercises cover topics such as basic digital and analog input/output programming and interfacing, multiplexing of LED displays, how to generate a true analog output, use of interrupts and the like. Applications include a reaction timer, an event counter, motor drive using PWM, and an arbitrary analog waveform generator. Most exercises can be completed using just a computer, the low cost Arduino Uno development board, and an array of small electronic parts such as LEDs, resistors, transistors, etc. Some exercises benefit from an oscilloscope. This is the print version of the on-line OER.

Introduction to Embedded Systems
Introduction to Embedded Systems

Author: David Russell

Publisher: Morgan & Claypool Publishers

Published: 2010-10-10

Total Pages: 275

ISBN-13: 1608454991

DOWNLOAD EBOOK

Many electrical and computer engineering projects involve some kind of embedded system in which a microcontroller sits at the center as the primary source of control. The recently-developed Arduino development platform includes an inexpensive hardware development board hosting an eight-bit ATMEL ATmega-family processor and a Java-based software-development environment. These features allow an embedded systems beginner the ability to focus their attention on learning how to write embedded software instead of wasting time overcoming the engineering CAD tools learning curve. The goal of this text is to introduce fundamental methods for creating embedded software in general, with a focus on ANSI C. The Arduino development platform provides a great means for accomplishing this task. As such, this work presents embedded software development using 100% ANSI C for the Arduino's ATmega328P processor. We deviate from using the Arduino-specific Wiring libraries in an attempt to provide the most general embedded methods. In this way, the reader will acquire essential knowledge necessary for work on future projects involving other processors. Particular attention is paid to the notorious issue of using C pointers in order to gain direct access to microprocessor registers, which ultimately allow control over all peripheral interfacing. Table of Contents: Introduction / ANSI C / Introduction to Arduino / Embedded Debugging / ATmega328P Architecture / General-Purpose Input/Output / Timer Ports / Analog Input Ports / Interrupt Processing / Serial Communications / Assembly Language / Non-volatile Memory

Designing Embedded Systems with Arduino
Designing Embedded Systems with Arduino

Author: Tianhong Pan

Publisher: Springer

Published: 2017-05-16

Total Pages: 236

ISBN-13: 981104418X

DOWNLOAD EBOOK

In this DIY guide, you will learn how to use Arduino – the open-source hardware board for makers, hobbyists, and inventors. You will learn how to develop your own projects, create prototypes, and produce professional-quality embedded systems. A simple step-by-step demonstration system accompanies you from vision to reality – and just like riding a bike, you’ll get better at it, the more you do it. Featuring a wealth of detailed diagrams and more than 50 fully functional examples, this book will help you get the most out of this versatile tool and bring your electronic inventions to life.

AVR Programming
AVR Programming

Author: Elliot Williams

Publisher: Maker Media, Inc.

Published: 2014-01-27

Total Pages: 587

ISBN-13: 1449355757

DOWNLOAD EBOOK

Atmel's AVR microcontrollers are the chips that power Arduino, and are the go-to chip for many hobbyist and hardware hacking projects. In this book you'll set aside the layers of abstraction provided by the Arduino environment and learn how to program AVR microcontrollers directly. In doing so, you'll get closer to the chip and you'll be able to squeeze more power and features out of it. Each chapter of this book is centered around projects that incorporate that particular microcontroller topic. Each project includes schematics, code, and illustrations of a working project. Program a range of AVR chips Extend and re-use other people’s code and circuits Interface with USB, I2C, and SPI peripheral devices Learn to access the full range of power and speed of the microcontroller Build projects including Cylon Eyes, a Square-Wave Organ, an AM Radio, a Passive Light-Sensor Alarm, Temperature Logger, and more Understand what's happening behind the scenes even when using the Arduino IDE

C Programming for Arduino
C Programming for Arduino

Author: Julien Bayle

Publisher: Packt Publishing Ltd

Published: 2013-05-17

Total Pages: 776

ISBN-13: 1849517592

DOWNLOAD EBOOK

Written as a practical Packt book brimming with engaging examples, C Programming for Arduino will help those new to the amazing open source electronic platform so that they can start developing some great projects from the very start.This book is great for people who want to learn how to design & build their own electronic devices. From interaction design art school students to the do-it-yourself hobbyist, or even simply people who want to learn electronics, this book will help by adding a new way to design autonomous but connected devices.