Prepared by the Technical Committee on Performance of Structures during Construction of the Structural Engineering Institute of ASCE. This report presents the current design practiceØfor diaphragm walls, with an emphasis on the most effective techniques. It provides an overview of various approaches to diaphragm wall design and presents several successful techniques used in Boston's Central Artery/Third Harbor Tunnel (CA/T) Project, a massive civil engineering effort thatØemployed more than three million square feet of diaphragm walls. This report focuses attention on the importance of techniques that take soil-structure interactions into consideration.
A Complete Guide to Solving Lateral Load Path Problems The Analysis of Irregular Shaped Structures: Diaphragms and Shear Walls explains how to calculate the forces to be transferred across multiple discontinuities and reflect the design requirements on construction documents. Step-by-step examples offer progressive coverage, from basic to very advanced illustrations of load paths in complicated structures. The book is based on the 2009 International Building Code, ASCE/SEI 7-05, the 2005 Edition of the National Design Specification for Wood Construction, and the 2008 Edition of the Special Design Provisions for Wind and Seismic (SDPWS-08). COVERAGE INCLUDES: Code sections and analysis Diaphragm basics Diaphragms with end horizontal offsets Diaphragms with intermediate offsets Diaphragms with openings Open front and cantilever diaphragms Diaphragms with vertical offsets Complex diaphragms with combined openings and offsets Standard shear walls Shear walls with openings Discontinous shear walls Horizontally offset shear walls The portal frame Rigid moment-resisting frame walls--the frame method of analysis
&Quot;This book assembles the practical rules and details for the efficient and economical execution of deep excavations. It draws together a wealth of experience of both design and construction from published work and the lifetime practice of the author. This second edition is extensively revised to include changes in design emphasis including those due to Eurocode 7 and descriptions of the latest equipment, construction techniques and geotechnical processes. Additional details include those of the latest piling and diaphragm wall equipment and innovations in top-down construction applied to basements and cut-and-cover works. The section on caissons has been expanded to include design methods."--BOOK JACKET.
Effectively Calculate the Pressures of Soil When it comes to designing and constructing retaining structures that are safe and durable, understanding the interaction between soil and structure is at the foundation of it all. Laying down the groundwork for the non-specialists looking to gain an understanding of the background and issues surrounding geotechnical engineering, Earth Pressure and Earth-Retaining Structures, Third Edition introduces the mechanisms of earth pressure, and explains the design requirements for retaining structures. This text makes clear the uncertainty of parameter and partial factor issues that underpin recent codes. It then goes on to explain the principles of the geotechnical design of gravity walls, embedded walls, and composite structures. What’s New in the Third Edition: The first half of the book brings together and describes possible interactions between the ground and a retaining wall. It also includes materials that factor in available software packages dealing with seepage and slope instability, therefore providing a greater understanding of design issues and allowing readers to readily check computer output. The second part of the book begins by describing the background of Eurocode 7, and ends with detailed information about gravity walls, embedded walls, and composite walls. It also includes recent material on propped and braced excavations as well as work on soil nailing, anchored walls, and cofferdams. Previous chapters on the development of earth pressure theory and on graphical techniques have been moved to an appendix. Earth Pressure and Earth-Retaining Structures, Third Edition is written for practicing geotechnical, civil, and structural engineers and forms a reference for engineering geologists, geotechnical researchers, and undergraduate civil engineering students.
This publication replaces the CIRIA report from 1984, R104 Design of retaining walls embedded in stiff clays. It provides best practice guidance on the selection and design of vertical embedded retaining walls.
This volume comprises select peer reviewed papers presented at the international conference - Advanced Research and Innovations in Civil Engineering (ARICE 2019). It brings together a wide variety of innovative topics and current developments in various branches of civil engineering. Some of the major topics covered include structural engineering, water resources engineering, transportation engineering, geotechnical engineering, environmental engineering, and remote sensing. The book also looks at emerging topics such as green building technologies, zero-energy buildings, smart materials, and intelligent transportation systems. Given its contents, the book will prove useful to students, researchers, and professionals working in the field of civil engineering.
Energy geostructures are a tremendous innovation in the field of foundation engineering and are spreading rapidly throughout the world. They allow the procurement of a renewable and clean source of energy which can be used for heating and cooling buildings. This technology couples the structural role of geostructures with the energy supply, using the principle of shallow geothermal energy. This book provides a sound basis in the challenging area of energy geostructures. The objective of this book is to supply the reader with an exhaustive overview on the most up-to-date and available knowledge of these structures. It details the procedures that are currently being applied in the regions where geostructures are being implemented. The book is divided into three parts, each of which is divided into chapters, and is written by the brightest engineers and researchers in the field. After an introduction to the technology as well as to the main effects induced by temperature variation on the geostructures, Part 1 is devoted to the physical modeling of energy geostructures, including in situ investigations, centrifuge testing and small-scale experiments. The second part includes numerical simulation results of energy piles, tunnels and bridge foundations, while also considering the implementation of such structures in different climatic areas. The final part concerns practical engineering aspects, from the delivery of energy geostructures through the development of design tools for their geotechnical dimensioning. The book concludes with a real case study. Contents Part 1. Physical Modeling of Energy Piles at Different Scales 1. Soil Response under Thermomechanical Conditions Imposed by Energy Geostructures, Alice Di Donna and Lyesse Laloui. 2. Full-scale In Situ Testing of Energy Piles, Thomas Mimouni and Lyesse Laloui. 3. Observed Response of Energy Geostructures, Peter Bourne-Webb. 4. Behavior of Heat-Exchanger Piles from Physical Modeling, Anh Minh Tang, Jean-Michel Pereira, Ghazi Hassen and Neda Yavari. 5. Centrifuge Modeling of Energy Foundations, John S. McCartney. Part 2. Numerical Modeling of Energy Geostructures 6. Alternative Uses of Heat-Exchanger Geostructures, Fabrice Dupray, Thomas Mimouni and Lyesse Laloui. 7. Numerical Analysis of the Bearing Capacity of Thermoactive Piles Under Cyclic Axial Loading, Maria E. Suryatriyastuti, Hussein Mroueh , Sébastien Burlon and Julien Habert. 8. Energy Geostructures in Unsaturated Soils, John S. McCartney, Charles J.R. Coccia , Nahed Alsherif and Melissa A. Stewart. 9. Energy Geostructures in Cooling-Dominated Climates, Ghassan Anis Akrouch, Marcelo Sanchez and Jean-Louis Briaud. 10. Impact of Transient Heat Diffusion of a Thermoactive Pile on the Surrounding Soil, Maria E. Suryatriyastuti, Hussein Mroueh and Sébastien Burlon. 11. Ground-Source Bridge Deck De-icing Systems Using Energy Foundations, C. Guney Olgun and G. Allen Bowers. Part 3. Engineering Practice 12. Delivery of Energy Geostructures, Peter Bourne-Webb with contributions from Tony Amis, Jean-Baptiste Bernard, Wolf Friedemann, Nico Von Der Hude, Norbert Pralle, Veli Matti Uotinen and Bernhard Widerin. 13. Thermo-Pile: A Numerical Tool for the Design of Energy Piles, Thomas Mimouni and Lyesse Laloui. 14. A Case Study: The Dock Midfield of Zurich Airport, Daniel Pahud. About the Authors Lyesse Laloui is Chair Professor, Head of the Soil Mechanics, Geoengineering and CO2 storage Laboratory and Director of Civil Engineering at the Swiss Federal Institute of Technology (EPFL) in Lausanne, Switzerland. Alice Di Donna is a researcher at the Laboratory of Soil Mechanics at the Swiss Federal Institute of Technology (EPFL) in Lausanne, Switzerland.
This book comprises select proceedings of the annual conference of the Indian Geotechnical Society. The conference brings together research and case histories on various aspects of geotechnical and geoenvironmental engineering. The book presents papers on geotechnical applications and case histories, covering topics such as (i) Characterization of Geomaterials and Physical Modelling; (ii) Foundations and Deep Excavations; (iii) Soil Stabilization and Ground Improvement; (iv) Geoenvironmental Engineering and Waste Material Utilization; (v) Soil Dynamics and Earthquake Geotechnical Engineering; (vi) Earth Retaining Structures, Dams and Embankments; (vii) Slope Stability and Landslides; (viii) Transportation Geotechnics; (ix) Geosynthetics Applications; (x) Computational, Analytical and Numerical Modelling; (xi) Rock Engineering, Tunnelling and Underground Constructions; (xii) Forensic Geotechnical Engineering and Case Studies; and (xiii) Others Topics: Behaviour of Unsaturated Soils, Offshore and Marine Geotechnics, Remote Sensing and GIS, Field Investigations, Instrumentation and Monitoring, Retrofitting of Geotechnical Structures, Reliability in Geotechnical Engineering, Geotechnical Education, Codes and Standards, and other relevant topics. The contents of this book are of interest to researchers and practicing engineers alike.
This book provides guidance on the design of temporary propping systems for deep excavations with the aim at improving efficiency in t heir use while ensuring safety.
This book presents the current design practice of diaphragm walls, with an emphasis on the most effective techniques. It provides an overview of various approaches to diaphragm wall design and presents several successful techniques used in Bostonýýýs Central Artery/Third Harbor Tunnel (CA/T) Project. The CA/T Project, a massive civil engineering effort, employed more than three million square feet of diaphragm walls. Prepared by SEI/ASCE Technical Committee on Performance of Structures During Construction, this report focuses attention on the importance of techniques that take soil-structure interactions into consideration. In addition, the Committeeýýýs goal is to encourage research and development in the area of soil-structure interaction by encouraging dialogue, coordination, and cooperation between the geotechnical and structural engineering professions.
