This practical manual is a major new addition to the resources available for micro-hydro power project and programme managers worldwide and represents excellent value for such a detailed technical reference handbook.
Micro-Hydro Design Manual has grown from Intermediate Technology's field experiences with micro-hydro installations and covers operation and maintenance, commissioning, electrical power, induction generators, electronic controllers, management, and energy surveys.There is an increasing need in many countries for power supplies to rural areas, partly to support industries, and partly to provide illumination at night. Government authorities are faced with the very high costs of extending electricity grids. Often micro-hydro provides an economic alternative to the grid. This is because independentmicro-hydro schemes save on the cost of grid transmission lines, and because grid extension schemes often have very expensive equipment and staff costs. In contrast, micro-hydro schemes can be designed and built by local staff andsmaller organizations following less strict regulations and using 'off-the-shelf' components or locally made machinery.
Waterpower is the largest source of renewable energy in the world today, and microhydro is a mature, proven technology that can provide clean, inexpensive, renewable energy with little or no impact on the environment. Serious Microhydro brings you dozens of firsthand stories of energy independence covering a complete range of systems, from household pressure sites to higher pressure installations capable of powering a farm, business, or small neighborhood. Topics include: Low head and medium head sites AC-only systems as well as ones using a battery/inverter subsystem Stand alone power supply or grid intertie setups Hybrid systems (combined with photovoltaics or wind) With all the variables involved in microhydro, there is no “typical” system. These case studies represent the most comprehensive collection of knowledge and experience available for tailoring an installation to meet the needs of a site and its owner or operators. If you are considering building a system, you are bound to find a wealth of creative solutions appropriate to your own circumstances. Serious Microhydro shows how scores of people are achieving a high standard of living from local energy sources with a minimal ecological footprint. It has particular appeal to homeowners, teachers, renewable energy professionals, activists, and decision makers who want to understand the technology from a “hands-on” perspective. Scott Davis is an award-winning renewable energy project developer with decades of experience operating, installing, designing, selling, and teaching microhydro technology. He is a founder and president of Friends of Renewable Energy BC, and the author of Microhydro: Clean Power From Water.
This is a guide to the use of induction motors for electricity generation in remote locations. It is written as a practical handbook for engineers and technicians involved in designing and installing small water-power schemes for isolated houses and communities. This revised edition brings in new concepts developed and tested to expand the power range of application of motors as generators, to make this technology safer and more reliable, while keeping costs low and making it accessible to developing countries. It also contains a new chapter on mains-connecting micro-hydro generators. This edition also draws on the practical experience of manufacturers and installers of induction generator units working in village locations in a large number of countries, among them Sri Lanka, Nepal, Peru, Kenya and others.
further chapters cover specific aspects of turbine types for hydro, not previously covered thoroughly by published material new title for successful Planning & Installing series
Micro-Hydro Design Manua:book Notebook /Journal Gift 120 Page -6×9 Soft Cover Matte Finish l has grown from Intermediate Technology's field experiences with micro-hydro installations and covers operation and maintenance, commissioning, electrical power, induction generators, electronic controllers, management, and energy surveys.There is an increasing need in many countries for power supplies to rural areas, partly to support industries, and partly to provide illumination at night. Government authorities are faced with the very high costs of extending electricity grids. Often micro-hydro provides an economic alternative to the grid. This is because independent micro-hydro schemes save on the cost of grid transmission lines, and because grid extension schemes often have very expensive equipment and staff costs. In contrast, micro-hydro schemes can be designed and built by local staff and smaller organizations following less strict regulations and using 'off-the-shelf' components or locally made machinery.
Small Hydroelectric Engineering Practice is a comprehensive reference book covering all aspects of identifying, building, and operating hydroelectric schemes between 500 kW and 50 MW. In this range of outputs there are many options for all aspects of the scheme and it is very important that the best options are chosen.As small hydroelectric schemes
Hydropower provides a complete discussion of the most up-to-date considerations of this method of creating renewable energy. After introducing the method’s history, the author explores various considerations for engineers, planners and managers who need to determine the best placement and size of a plant. The book then presents various types of hydropower systems, such as Run-of-River Schemes and various types of Dam and Turbines, also considering the important economic, environmental and geological impacts of each. Those involved in the planning, design and management of hydropower systems, such as engineers, researchers, managers and policymakers will find this book a very valuable and insightful resource. Explores different types of dams and turbines set alongside easy-to-understand diagrams, such as Embankment Dams, Concrete Arch Dams, Reaction Turbines and Francis Turbines Considers various economic and environmental factors significant for this type of project, such as resettlement, biodiversity and greenhouse gases Discusses best practices for locating a hydropower site and how to make important decisions regarding placement and method
Where flow is limited but high heads of water are available the Pelton wheel is one of the most useful turbines. It can be fabricated in small engineering shops with basic facilities. Jeremy Thake explains how to design, make and use them.
Highly illustrated and practical, Microhydro is the first complete book on the topic in many years. Covering both AC and DC systems, it first introduces the important principles on which microhydro is based, including the advantages and disadvantages of using small amounts of water to generate power. Along with a glossary of microhydro terms, further reading and resources - including websites and commerical suppliers - Microhydro includes all the information a homeowner needs to start generating clean, off-grid, and independent power.