Designers' Guide to EN 1993-1-1
Designers' Guide to EN 1993-1-1

Author: Leroy Gardner

Publisher: Thomas Telford Publishing

Published: 2005

Total Pages: 184

ISBN-13:

DOWNLOAD EBOOK

&Quot;After some 25 years in preparation the key parts of EN 1993-1-1 Eurocode 3: Design of steel structures General rules and rules for buildings have now been finalised. Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available.". "Throughout, this book concentrates on the most commonly encountered aspects of structural steel design, with an emphasis on the situation in buildings. Much of its content is therefore devoted to the provisions of the Part 1.1: General rules and rules for buildings of EN 1993. This is, however, supplemented by material on loading, joints and cold-formed design. For each of the principal aspects covered, the book provides background to the structural behaviour, explanation of the codified treatment including departure from existing practice (BS 5950), and numerous worked examples. This Guide should serve as the primary point of reference for designing steel structures to Eurocode 3."--BOOK JACKET.

Designers' Guide to EN 1994-1-1
Designers' Guide to EN 1994-1-1

Author: Roger Paul Johnson

Publisher: Thomas Telford

Published: 2004

Total Pages: 272

ISBN-13: 9780727731517

DOWNLOAD EBOOK

EN 1994-1-1, also known as Eurocode 4, is a standard of the Eurocode suite. This guide provides the user with guidance on the interpretation and use of EN 1994-1-1 through worked examples in relation to rules for buildings, structural fire design and for bridges. It is useful for civil and structural engineers, code-drafting committees, and more.

Designers' Guide to EN 1992-1-1 Eurocode 2: Design of Concrete Structures
Designers' Guide to EN 1992-1-1 Eurocode 2: Design of Concrete Structures

Author: Andrew W Beeby

Publisher: Thomas Telford

Published: 2005-09-30

Total Pages: 240

ISBN-13: 9780727731050

DOWNLOAD EBOOK

Applies to the design of building and civil engineering structures in plain, reinforced and pre-stressed concrete. The code (for convenience referred to as EC2) is written in several parts: EN 1992 - 1 - 1; EN 1992 - 1 - 2; EN 1992 - 2; and EN 1992 - 3.

Designers' Guide to EN 1991-1-2, EN 1992-1-2, EN 1993-1-2 and EN 1994-1-2
Designers' Guide to EN 1991-1-2, EN 1992-1-2, EN 1993-1-2 and EN 1994-1-2

Author: Tom Lennon

Publisher: Thomas Telford

Published: 2007-01-12

Total Pages: 152

ISBN-13: 9780727731579

DOWNLOAD EBOOK

A guide to 4 documents, EN1991 Part 1.2, EN1992 Part 1.2, EN1993 Part 1.2 and EN1994 Part 1.2. It provides an introduction to the procedures required to achieve design solutions for a typical range of structural elements and assemblies. Worked examples are included to illustrate the use of the Eurocodes for specific design scenarios.

Designer's Guide to EN 1990
Designer's Guide to EN 1990

Author: H. Gulvanessian

Publisher: Thomas Telford

Published: 2002

Total Pages: 220

ISBN-13: 9780727730114

DOWNLOAD EBOOK

- General - Requirements - Principles of limit state design - Basic variables - Structural analysis and design assisted by testing - Verification by the partial factor method - Annex A1 (normative) - Application for buildings - Management of structural reliability for construction works - Basis for partial factor design and reliability analysis - Design assisted by testing - Appendix A: The Construction Products Directive (89/106/EEC) - Appendix B: The Eurocode Suite - Appendix C: Basic statistical terms and techniques - Appendix D: National standard organizations

Design of Steel Structures
Design of Steel Structures

Author: Frantisek Wald

Publisher: Research Publishing Service

Published: 2012

Total Pages: 19

ISBN-13: 8001035808

DOWNLOAD EBOOK

The aim of this book is to introduce European Standards - Eurocodes for structural steel design. The basic principles for design of steel structures according to EN 1993-1-1 General rules and rules for buildings and EN 1993-1-8 Design of joints are summarized. The design procedures and application of freely available tools are demonstrated through worked examples in the book.

Designers' Guide to Eurocode 4: Design of Composite Structures EN 1994-2
Designers' Guide to Eurocode 4: Design of Composite Structures EN 1994-2

Author: Chris R Hendy

Publisher: Thomas Telford

Published: 2006-08-23

Total Pages: 230

ISBN-13: 9780727731616

DOWNLOAD EBOOK

EN 1994-2 is one standard of the Eurocode suite & describes the principles & requirements for safety, serviceability & durability of composite steel & concrete bridges. This guide provides the user with guidance on the interpretation & use of EN 1994-2 through worked examples in relation to the general rules & the rules for bridges.

Design Guide for Concrete-filled Double Skin Steel Tubular Structures
Design Guide for Concrete-filled Double Skin Steel Tubular Structures

Author: Lin-Hai Han

Publisher: CRC Press

Published: 2018-10-12

Total Pages: 77

ISBN-13: 0429802943

DOWNLOAD EBOOK

This is the first design guide on concrete filled double skin steel tubular (CFDST) structures. It addresses in particular CFDST structures with plain concrete sandwiched between circular hollow sections, and provides the relevant calculation methods and construction provisions for CFDST structures. These inherit the advantages of conventional concrete-filled steel tubular (CFST) structures, including high strength, good ductility and durability, high fire resistance and favourable constructability. Moreover, because of their unique sectional configuration, CFDST structures have been proved to possess lighter weight, higher bending stiffness and better cyclic performance than conventional CFST. Consequently CFDST can offer reduced concrete consumption and construction costs. This design guide is for engineers designing electrical grid infrastructures, wind power towers, bridge piers and other structures requiring light self-weight, high bending stiffness and high bearing capacity.

Structural Steel Design to Eurocode 3 and AISC Specifications
Structural Steel Design to Eurocode 3 and AISC Specifications

Author: Claudio Bernuzzi

Publisher: John Wiley & Sons

Published: 2016-05-02

Total Pages: 531

ISBN-13: 1118631285

DOWNLOAD EBOOK

Structural Steel Design to Eurocode 3 and AISC Specifications deals with the theory and practical applications of structural steel design in Europe and the USA. The book covers appropriate theoretical and background information, followed by a more design‐oriented coverage focusing on European and United States specifications and practices, allowing the reader to directly compare the approaches and results of both codes. Chapters follow a general plan, covering: A general section covering the relevant topics for the chapter, based on classical theory and recent research developments A detailed section covering design and detailing to Eurocode 3 specification A detailed section covering design and detailing to AISC specifications Fully worked examples are using both codes are presented. With construction companies working in increasingly international environments, engineers are more and more likely to encounter both codes. Written for design engineers and students of civil and structural engineering, this book will help both groups to become conversant with both code systems.

Steel Designers' Manual
Steel Designers' Manual

Author: SCI (Steel Construction Institute)

Publisher: John Wiley & Sons

Published: 2016-06-27

Total Pages: 1410

ISBN-13: 1119249864

DOWNLOAD EBOOK

In 2010 the then current European national standards for building and construction were replaced by the EN Eurocodes, a set of pan-European model building codes developed by the European Committee for Standardization. The Eurocodes are a series of 10 European Standards (EN 1990 – EN 1999) that provide a common approach for the design of buildings, other civil engineering works and construction products. The design standards embodied in these Eurocodes will be used for all European public works and are set to become the de-facto standard for the private sector in Europe, with probable adoption in many other countries. This classic manual on structural steelwork design was first published in 1955, since when it has sold many tens of thousands of copies worldwide. For the seventh edition of the Steel Designers' Manual all chapters have been comprehensively reviewed, revised to ensure they reflect current approaches and best practice, and brought in to compliance with EN 1993: Design of Steel Structures (the so-called Eurocode 3).