Section 1038 of the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) contains provisions for each State to begin incorporating scrap tire rubber into their asphalt paving materials. A workshop was developed through the cooperation of highway agencies and the asphalt industry to discuss present procedures and practices for designing and constructing asphalt pavements which incorporate scrap tire rubber (crumb rubber modifier). These workshop notes were prepared from the proceedings of the 13 workshop sessions.
This synthesis on the use of recycled rubber tires in highways will be of interest to administrators and policy-makers; pavement, materials, geotechnical, environmental, and traffic operations engineers; and research engineers involved with highway design and construction issues. Information is provided on the uses of rubber tires in asphalt paving materials as well as other uses, such as on fills and embankments, for erosion control and on railroad grade crossings. Specifically, information is included which identifies the agencies using or implementing applications for recycled rubber tires and defines the design parameters, technical and construction limitations, performance, costs, benefits, environmental limitations, specifications, and availability. This synthesis of information defines the use of recycled rubber tires in highways and is based on a review of nearly 500 references and on information recorded from state highway agency responses to a 1991 survey of practice. Updates are included for as much of the state practice information possible through 1993. The use of scrap tires for highway applications is dynamic with regard to policy and technical issues. Therefore, the reader should keep in mind that the information presented reflects the best available data at a particular time. The synthesis also identifies current research in the topic area, critical research needs, and legislative issues that affect application and use of recycled rubber tires.
Tire Waste and Recycling takes a methodical approach to the recycling of tires, providing a detailed understanding on how to manage, process, and turn waste tires into valuable materials and industrial applications. Sections cover fundamental aspects such as tire use, composition, trends, legislation, the current global situation, the possibilities for moving towards a circular economy, lifecycle options, treatment methods, and opportunities for re-use, recycling and recovery. Subsequent sections of the book focus on specific technologies that enable the utilization of waste tires in the development of high value materials and advanced applications. Finally, the future of tire recycling is considered. This is an essential resource for scientists, R&D professionals, engineers and manufacturers working in the tire, rubber, waste, recycling, automotive and aerospace industries. In academia, the book will be of interest to researchers and advanced scientists across rubber science, polymer science, materials engineering, environmental science, chemistry and chemical engineering. - Offers systematic coverage of tire recycling, covering composition, lifecycle, processing options, material developments and latest technologies - Explains end-of-life-options in detail, considering approaches and methods for reduction, re-use, recycling and recovery - Explores key application and product areas for recycled tire materials, from civil engineering, sports and leisure, to roads and transport, construction, automotive, and many more
Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.
This volume highlights the latest advances, innovations, and applications in the field of asphalt pavement technology, as presented by leading international researchers and engineers at the 5th International Symposium on Asphalt Pavements & Environment (ISAP 2019 APE Symposium), held in Padua, Italy on September 11-13, 2019. It covers a diverse range of topics concerning materials and technologies for asphalt pavements, designed for sustainability and environmental compatibility: sustainable pavement materials, marginal materials for asphalt pavements, pavement structures, testing methods and performance, maintenance and management methods, urban heat island mitigation, energy harvesting, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Focusing on asphalt paving technology, this work emphasizes quality control and quality assurance programmes in producing high-quality pavements. It combines theory and practice of asphalt paving including developments and information from the recently completed Strategic Highway Research Program which was designed to improve asphalt specifications, mix design and analysis systems.
The addition of polymers to bitumen allows the modification of certain physical properties, such as softening point, brittleness and ductility, of the bitumen. Polymer modified bitumen: Properties and characterisation provides a valuable and in-depth coverage of the science and technology of polymer modified bitumen.After an initial introduction to bitumen and polymer modified bitumen, the book is divided into two parts. Chapters in part one focus on the preparation and properties of a range of polymer modified bitumen, including polymer bitumen emulsions, modification of bitumen with poly (urethanes), waste rubber and plastic and polypropylene fibres. Part two addresses the characterisation and properties of polymer modified bitumen. Chapter topics covered include rheology, simulated and actual long term ageing studies; the solubility of bituminous binders in fuels and the use of Fourier transform infrared spectroscopy to study ageing/oxidation of polymer modified bitumen.Polymer modified bitumen is an essential reference for scientists and engineers, from both academia and the civil engineering and transport industries, interested in the properties and characterisation of polymer modified bitumen. - Provides a comprehensive and in-depth coverage of the science and technology of polymer modified bitumen - Focuses on the preparation and properties of a range of polymer modified bitumen, including emulsions, modification of bitumen with poly(urethanes), waste rubber and plastic as well as polypropylene fibres - Addresses the characterization and properties of polymer modified bitumen, including rheology, simulated and actual long term ageing studies, and the solubility of bituminous binders in fuels
This book gathers the proceedings of an international conference held at Empa (Swiss Federal Laboratories for materials Science and Technology) in Dübendorf, Switzerland, in July 2020. The conference series was established by the International Society of Maintenance and Rehabilitation of Transport Infrastructure (iSMARTi) for promoting and discussing state-of-the-art design, maintenance, rehabilitation and management of pavements. The inaugural conference was held at Mackenzie Presbyterian University in Sao Paulo, Brazil, in 2000. The series has steadily grown over the past 20 years, with installments hosted in various countries all over the world. The respective contributions share the latest insights from research and practice in the maintenance and rehabilitation of pavements, and discuss advanced materials, technologies and solutions for achieving an even more sustainable and environmentally friendly infrastructure.
Developing countries in the tropics have different natural conditions and different institutional and financial situations to industrialized countries. However, most textbooks on highway engineering are based on experience from industrialized countries with temperate climates, and deal only with specific problems. Road Engineering for Development (published as Highway and Traffic Engineering in Developing Countries in its first edition) provides a comprehensive description of the planning, design, construction and maintenance of roads in developing countries. It covers a wide range of technical and non-technical problems that may confront road engineers working in this area. The technical content of the book has been fully updated and current development issues are focused on. Designed as a fundamental text for civil engineering students this book also offers a broad, practical view of the subject for practising engineers. It has been written with the assistance of a number of world-renowned specialist professional engineers with many years experience in Africa, the Middle East, Asia and Central America.
