This book focuses on Creep in Ceramics. The book consists of two parts. In part A general knowledge of creep in ceramics is considered, while part B specifies creep in technologically important ceramics, namely creep in oxide ceramics, carnides and nitrides. While covering all relevant information regarding raw materials and characterization of creep in ceramics, the book also summarizes most recent innovations and developments in this field as a result of extensive literature search.
* Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion Understanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world’s leading investigators. · Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion
This proceedings volume, "Plastic Deformation of Ceramics," constitutes the papers of an international symposium held at Snowbird, Utah from August 7-12, 1994. It was attended by nearly 100 scientists and engineers from more than a dozen countries representing academia, national laboratories, and industry. Two previous conferences on this topic were held at The Pennsylvania State University in 1974 and 1983. Therefore, the last major international conference focusing on the deformation of ceramic materials was held more than a decade ago. Since the early 1980s, ceramic materials have progressed through an evolutionary period of development and advancement. They are now under consideration for applications in engineering structures. The contents of the previous conferences indicate that considerable effort was directed towards a basic understanding of deformation processes in covalently bonded or simple oxide ceramics. However, now, more than a decade later, the focus has completely shifted. In particular, the drive for more efficient heat engines has resulted in the development of silicon-based ceramics and composite ceramics. The discovery of high-temperature cupric oxide-based superconductors has created a plethora of interesting perovskite-Iike structured ceramics. Additionally, nanophase ceramics, ceramic thin films, and various forms of toughened ceramics have potential applications and, hence, their deformation has been investigated. Finally, new and exciting areas of research have attracted interest since 1983, including fatigue, nanoindentation techniques, and superplasticity.
This textbook describes the physics of the plastic deformation of solids at high temperatures. It is directed at geologists or geophysicists interested in the high-temperature behaviour of crystals who wish to become acquainted with the methods of materials science in so far as they are useful to earth scientists. It explains the most important models and recent experimental results without losing the reader in the primary literature of materials science. In turn the book deals with the essential solid-state physics; thermodynamics and hydrostatics of creep; creep models and their applications in the geological sciences; diffusion creep; superplastic deformation and deformation enhanced by phase transformations. Five concluding chapters give experimental results for metals, ceramics and minerals. There are extensive bibliographies to aid further study.
A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.
This volume "Deformation of Ceramic Materials II" constitutes the proceedings of an international symposium held at The Pennsyl vania State University, University Park, PA on July 20, 21, and 22, 1983. It includes studies of semiconductors and minerals which are closely related to ceramic materials. The initial conference on this topic was held in 1974 at Penn State and the proceedings were published in the volume entitled "Deformation of Ceramic Materials." This conference emphasized the deformation behavior of crystals and po1ycrysta11ine and polyphase ceramics with internationally recognized authorities as keynote lecturers on the major subtopics. Several papers dealing with cavity nucleation and creep crack growth represent a major new research thrust in ceramics since the first conference. This collection of papers represents the state-of-the art of our understanding of the plastic deformation behavior of ceramics and the crystals of which they are composed. We are grateful for the suggestions of our International Advisory Committee .in recommending experts in their respective countries to participate. We are particularly grateful that the organizers of the previous Dislocation-Point Defect Interaction Workshops agreed to participate in the Penn State Symposium as an alternative at the suggestion of Prof. A. H. Heuer. We acknowledge the financial support of the National Science Foundation for this conference.
High-temperature ceramic fibers are the key components of ceramic matrix composites (CMCs). Ceramic fiber properties (strength, temperature and creep resistance, for example)-along with the debonding characteristics of their coatings-determine the properties of CMCs. This report outlines the state of the art in high-temperature ceramic fibers and coatings, assesses fibers and coatings in terms of future needs, and recommends promising avenues of research. CMCs are also discussed in this report to provide a context for discussing high-temperature ceramic fibers and coatings.
The book gives a description of the failure phenomena of ceramic materials under mechanical loading, the methods to determine their properties, and the principles for material selection. The book presents fracture mechanical and statistical principles and their application to describe the scatter of strength and lifetime, while special chapters are devoted to creep behaviour, multiaxial failure criteria and thermal shock behaviour. XXXXXXX Neuer Text Describing how ceramic materials fracture and fail under mechanical loading, this book provides methods for determining the properties of ceramics, and gives criteria for selecting ceramic materials for particular applications. It also examines the fracture-mechanical and statistical principles and their use in understanding the strength and durability of ceramics. Special chapters are devoted to creep behavior, criteria for multiaxial failure, and behavior under thermal shock. Readers will gain insight into the design of reliable ceramic components.
The results of high-temperature creep of various ceramic composites will be reviewed. In particular, creep results for Al2O3 and Si3N4 matrices reinforced with SiC whiskers will be emphasized. For a given temperature, stress and grain size, the creep rate of the Al2O3 composite is usually lower than that of the ceramic matrix. In general, creep at low stresses occurs by grain boundary sliding accommodated by diffusion, whereas higher stresses lead to damage accumulation processes which are manifested by triple point cavitation and cracking. The quasi-steady-state creep rates depend on grain size, whisker concentration, and the amount of glass phase present between the boundary of the whisker and the matrix. Unless all of the parameters are known, including the fabrication and loading histories, comparisons between various studies that used samples prepared in different ways are difficult. 44 refs., 7 figs., 2 tabs.
