Assessing Corrosion of MSE Wall Reinforcement

Assessing Corrosion of MSE Wall Reinforcement

Author: Travis M. Gerber

Publisher:

Published: 2010

Total Pages: 74

ISBN-13:

DOWNLOAD EBOOK

The primary objective of this study was to extract reinforcement coupons from select MSE walls and document the extent of corrosion. A secondary objective of this project was to develop and assess techniques for removal of coupons on two-stage MSE walls.


Corrosion Effects of Cement Stabilized Backfill on Galvanized Steel Earth Reinforcements

Corrosion Effects of Cement Stabilized Backfill on Galvanized Steel Earth Reinforcements

Author: Derek V. Morris

Publisher:

Published: 1994

Total Pages: 156

ISBN-13:

DOWNLOAD EBOOK

Cement stabilization of backfill has been used for some time in mechanically stabilized earth type retaining walls. However, there has been no data on the corrosion life of galvanized steel reinforcement in this environment, which is intermediate in pH between normal soil and pure cement. Field observations had indicated a potential corrosion problem at a particular site in District 12. As a result of the test program conducted during this project, the following conclusions were made. First, cement addition to backfill in the usual quantities (i.e. 7% or more) raised the pH environment to values close to that of normal concrete. At these levels corrosion rates of zinc coatings were not significantly accelerated -- if anything, corrosion rates were less than for unstabilized fill. Second, very small amounts of cement addition, of the order of 1% to 4% producing pH values significantly less than 12, could cause limited acceleration of corrosion. It is, therefore, advisable to control minimum cement levels and to encourage efficient mixing. Third, elevated corrosion rates were associated primarily with the presence of inorganic ions, both for stabilized and unstabilized fill. In the case of the problem site in District 12, this appeared to be the result primarily of unusually high sulfate content in the fill. Fourth, the use of crushed concrete as backfill did not accelerate corrosion. This material, therefore, appears to be acceptable for this application.


Assessing the Long-term Performance of Mechanically Stabilized Earth Walls

Assessing the Long-term Performance of Mechanically Stabilized Earth Walls

Author: Travis M. Gerber

Publisher: Transportation Research Board

Published: 2012

Total Pages: 211

ISBN-13: 0309223741

DOWNLOAD EBOOK

"Mechanically stabilized earth (MSE) walls are an important class of infrastructure assets whose long-term performance depends on various factors. As with most all other classes of assets, MSE walls need periodic inspection and assessment of performance. To date, some agencies have established MSE wall monitoring programs, whereas others are looking for guidance, tools, and funding to establish their own monitoring programs. The objective of this synthesis project is to determine how transportation agencies monitor, assess, and predict the long-term performance of MSE walls. The information used to develop this synthesis came from a literature review together with a survey and interviews. Of the 52 U.S. and 12 Canadian targeted survey recipients, 39 and five, respectively, responded. This synthesis reveals that unlike bridges and pavements, MSE walls and retaining walls in general are often overlooked as assets. Fewer than one-quarter of state-level transportation agencies in the United States have developed some type of MSE wall inventory beyond that which may be captured as part of their bridge inventories. Fewer still have the methods and means to populate their inventories with data from ongoing inspections from which assessments of wall performance can be made. In the United States, there is no widely used, consistently applied system for managing MSE walls. Wall inventory and monitoring practices vary between agencies. This synthesis examines existing practices concerning the nature, scope, and extent of existing MSE wall inventories. It also examines the collection of MSE wall data, including the types of performance data collected, how they are maintained in wall inventories and databases, the frequency of inventory activities, and assessment practices relevant to reinforcement corrosion and degradation. Later parts of this synthesis discuss how MSE wall performance data are assessed, interpreted, and used in asset management decisions. This synthesis finds that the most well-implemented wall inventory and assessment system in the United States is the Wall Inventory Program developed by FHWA for the National Park Service. However, this system, like some others, uses 'condition narratives' in a process that can be somewhat cumbersome and subjective. Other systems use more direct numeric scales to describe wall conditions, and an advantage of such systems is that they are often compatible with those used in assessments of bridges. As experience with MSE walls accumulates, agencies will likely continue to develop, refine, and better calibrate procedures affecting design, construction, condition assessment, and asset management decisions. One portion of this synthesis is dedicated to summarizing the actions taken thus far by survey respondents to improve the long-term performance of their MSE walls. Many agencies prescribe the use of a pre-approved wall design and/or wall supplier. Other actions or policies frequently focus on drainage-related issues."--Summary.


Corrosion of Reinforcement in Concrete

Corrosion of Reinforcement in Concrete

Author: M Raupach

Publisher: Woodhead Publishing

Published: 2014-01-23

Total Pages: 337

ISBN-13: 1845692284

DOWNLOAD EBOOK

Given the widespread use of reinforced concrete in infrastructure, understanding the corrosion of this material is of major importance. As a result there has been a wealth of research into catalysts, inhibitors and effective means of monitoring the rate of corrosion. Corrosion of reinforcement in concrete: mechanisms, monitoring, inhibitors and rehabilitation techniques summarises some of the most significant research and its implications.The book begins by reviewing findings from various experiments designed to test the corrosion rate of metals induced by a range of factors. Later chapters discuss techniques for monitoring and testing for corrosion. The book concludes by assessing important methods of prevention, including corrosion inhibitors, protective coatings and electrochemical methods for protection, together with rehabilitation procedures for susceptible structures.Filled with practical examples and written by a distinguished team of international contributors, Corrosion of reinforcement in concrete: mechanisms, monitoring, inhibitors and rehabilitation techniques is an essential reference for civil engineers using reinforced concrete. Summarises research into catalysts, inhibitors and effective means of monitoring the rate of corrosion Concludes by assessing important methods of prevention