Corrosion of Metals
Corrosion of Metals

Author: Helmut Kaesche

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 604

ISBN-13: 3642960383

DOWNLOAD EBOOK

Corrosion due to water is one of the most significant and complex causes of damage to metallic products. Written from the viewpoint of physical chemistry, this authoritative and established text deals with the aqueous corrosion of metals. Available for the first time in English, Corrosion of Metal addressing engineers, metallurgists, physicists and chemists. This self-contained, valuable reference comprehensively organizes and makes readily accessible the accumulated wealth of fundamental and applied knowledge. The concentration is on the underlying essentials of corrosion and failure, and the material is consistently presented in relation to practical applications to corrosion protection. The first chapters introducing the physicochemical principles are ideal for students. The following chapters provide an overview of the state of research for those familiar with the fundamentals. An exhaustive bibliography and appendices conclude the volume.

Corrosion and Its Control
Corrosion and Its Control

Author: H. VanDroffelaar

Publisher: National Assn of Corrosion Engineers

Published: 1994-12-31

Total Pages: 332

ISBN-13: 9781877914713

DOWNLOAD EBOOK

A text that emphasizes the engineering aspects of corrosion and its control in ways helpful to practicing engineers, based on notes used by the authors for an advanced undergraduate engineering course at Queen's U., Kingston, Ontario. This revised and expanded edition places particular emphasis on u

Shreir's Corrosion
Shreir's Corrosion

Author:

Publisher: Elsevier

Published: 2009-02-27

Total Pages: 3652

ISBN-13: 0444527877

DOWNLOAD EBOOK

This four-volume reference work builds upon the success of past editions of Elsevier’s Corrosion title (by Shreir, Jarman, and Burstein), covering the range of innovations and applications that have emerged in the years since its publication. Developed in partnership with experts from the Corrosion and Protection Centre at the University of Manchester, Shreir’s Corrosion meets the research and productivity needs of engineers, consultants, and researchers alike. Incorporates coverage of all aspects of the corrosion phenomenon, from the science behind corrosion of metallic and non-metallic materials in liquids and gases to the management of corrosion in specific industries and applications Features cutting-edge topics such as medical applications, metal matrix composites, and corrosion modeling Covers the benefits and limitations of techniques from scanning probes to electrochemical noise and impedance spectroscopy

Introduction to Corrosion Science
Introduction to Corrosion Science

Author: E. McCafferty

Publisher: Springer Science & Business Media

Published: 2010-01-04

Total Pages: 583

ISBN-13: 1441904549

DOWNLOAD EBOOK

This textbook is intended for a one-semester course in corrosion science at the graduate or advanced undergraduate level. The approach is that of a physical chemist or materials scientist, and the text is geared toward students of chemistry, materials science, and engineering. This textbook should also be useful to practicing corrosion engineers or materials engineers who wish to enhance their understanding of the fundamental principles of corrosion science. It is assumed that the student or reader does not have a background in electrochemistry. However, the student or reader should have taken at least an undergraduate course in materials science or physical chemistry. More material is presented in the textbook than can be covered in a one-semester course, so the book is intended for both the classroom and as a source book for further use. This book grew out of classroom lectures which the author presented between 1982 and the present while a professorial lecturer at George Washington University, Washington, DC, where he organized and taught a graduate course on “Environmental Effects on Materials.” Additional material has been provided by over 30 years of experience in corrosion research, largely at the Naval Research Laboratory, Washington, DC and also at the Bethlehem Steel Company, Bethlehem, PA and as a Robert A. Welch Postdoctoral Fellow at the University of Texas. The text emphasizes basic principles of corrosion science which underpin extensions to practice.

Corrosion Engineering
Corrosion Engineering

Author: Branko N. Popov

Publisher: Elsevier

Published: 2015-02-26

Total Pages: 813

ISBN-13: 0444627278

DOWNLOAD EBOOK

Corrosion Engineering: Principles and Solved Problems covers corrosion engineering through an extensive theoretical description of the principles of corrosion theory, passivity and corrosion prevention strategies and design of corrosion protection systems. The book is updated with results published in papers and reviews in the last twenty years. Solved corrosion case studies, corrosion analysis and solved corrosion problems in the book are presented to help the reader to understand the corrosion fundamental principles from thermodynamics and electrochemical kinetics, the mechanism that triggers the corrosion processes at the metal interface and how to control or inhibit the corrosion rates. The book covers the multidisciplinary nature of corrosion engineering through topics from electrochemistry, thermodynamics, mechanical, bioengineering and civil engineering. - Addresses the corrosion theory, passivity, material selections and designs - Covers extensively the corrosion engineering protection strategies - Contains over 500 solved problems, diagrams, case studies and end of chapter problems - Could be used as a text in advanced/graduate corrosion courses as well self-study reference for corrosion engineers

Corrosion of Aluminium
Corrosion of Aluminium

Author: Christian Vargel

Publisher: Elsevier

Published: 2004-10-02

Total Pages: 659

ISBN-13: 0080472362

DOWNLOAD EBOOK

Corrosion of Aluminium highlights the practical and general aspects of the corrosion of aluminium alloys with many illustrations and references. In addition to that, the first chapter allows the reader who is not very familiar with aluminium to understand the metallurgical, chemical and physical features of the aluminium alloys. The author Christian Vargel, has adopted a practitioner approach, based on the expertise and experience gained from a 40 year career in aluminium corrosion This approach is most suitable for assessing the corrosion resistance of aluminium- an assessment which is one of the main conditions for the development of many uses of aluminium in transport, construction, power transmission etc. - 600 bibliographic references provide a comprehensive guide to over 100 years of related study - Providing practical applications to the reader across many industries - Accessible to both the beginner and the expert

Corrosion Basics
Corrosion Basics

Author: Pierre R Roberge

Publisher:

Published: 2018-03-22

Total Pages: 822

ISBN-13: 9781575903606

DOWNLOAD EBOOK

This book provides general coverage of the wide field of corrosion control. It is designed to help readers being initiated into corrosion work and presents each corrosion process or control procedure in the most basic terms. Since the first edition was published in 1970, there have been major advances and changes in the technologies used to combat corrosion damage. The best techniques available for detecting corrosion, determining the corrosion resistance of a material, or evaluating the efficacy of a control procedure serve as daily tools for attacking the problems faced by thousands of persons engaged in corrosion work. This book will foster a better appreciation for these procedures. As with the first and second editions of "Corrosion Basics: An Introduction," this third edition, also authored by Pierre R. Roberge, is intended to convey the scope of the field of corrosion prevention and control. It is important to realize the extent of the effort being made today in analyzing and combating corrosion. Much of the experience and many of the workable solutions developed in one area of corrosion work can be used to improve the control procedures of another area. While most people work in only one area of this total discipline, there is always the possibility that a shift in responsibilities or interest brings one to work in a completely different area of corrosion prevention and control.

Corrosion for Everybody
Corrosion for Everybody

Author: Alec Groysman

Publisher: Springer Science & Business Media

Published: 2009-11-21

Total Pages: 377

ISBN-13: 9048134773

DOWNLOAD EBOOK

People seldom enjoy corrosion. They usually perceive it as a nasty phenomenon with which they must cope. Yet many people, far from the corrosion field, come across it because of their professional duty. Lawyers, historians, doctors, architects, philosophers, artists, and archeologists, to name a few, may want or need to understand the principles of corrosion. This volume explains this important topic in a lucid, interesting, and popular form to everybody: to students and young engineers who are only beginning their studies, to scientists and engineers who have dealt with corrosion for many years, and to non-specialists involved in corrosion problems. The book uses a fresh writing style, with some new explanations relating to thermodynamics of oxidation of iron and mild steels in water, reversible and irreversible potential, solubility of oxygen in water and aqueous solutions of electrolytes, corrosion of metals in fuels, corrosion of storage tanks for fuels and their corrosion control, corrosion monitoring in practice, humanitarian aspects of corrosion science and technology (history of the evolution of knowledge about corrosion, relationships between corrosion and philosophy, corrosion and art). Many practical examples of various corrosion phenomena are given.

Atmospheric Corrosion
Atmospheric Corrosion

Author: Christofer Leygraf

Publisher: John Wiley & Sons

Published: 2016-06-07

Total Pages: 509

ISBN-13: 1118762185

DOWNLOAD EBOOK

ATMOSPHERIC CORROSION Presents a comprehensive look at atmospheric corrosion, combining expertise in corrosion science and atmospheric chemistry Atmospheric corrosion has been a subject of engineering study, largely empirical, for nearly a century. Scientists came to the field rather later on and had considerable difficulty bringing their arsenal of tools to bear on the problem. Atmospheric corrosion was traditionally studied by specialists in corrosion having little knowledge of atmospheric chemistry, history, or prospects. Atmospheric Corrosion provides a combined approach bringing together experimental corrosion and atmospheric chemistry. The second edition expands on this approach by including environmental aspects of corrosion, atmospheric corrosion modeling, and international corrosion exposure programs. The combination of specialties provides a more comprehensive coverage of the topic. These scientific insights into the corrosion process and its amelioration are the focus of this book. Key topics include the following: Basic principles of atmospheric corrosion chemistry Corrosion mechanisms in controlled and uncontrolled environments Degradation of materials in architectural, transport, and structural applications; electronic devices; and cultural artifacts Protection of existing materials and choosing new ones that resist corrosion Prediction of how and where atmospheric corrosion may evolve in the future Complete with appendices discussing experimental techniques, computer models, and the degradation of specific metals, Atmospheric Corrosion, Second Edition continues to be an invaluable resource for corrosion scientists, corrosion engineers, conservators, environmental scientists, and anyone interested in the theory and application of this evolving field. The book concerns primarily the atmospheric corrosion of metals and is written at a level suitable for advanced undergraduates or beginning graduate students in any of the physical or engineering sciences.

Principles of Corrosion Engineering and Corrosion Control
Principles of Corrosion Engineering and Corrosion Control

Author: Zaki Ahmad

Publisher: Elsevier

Published: 2006-09-18

Total Pages: 673

ISBN-13: 0080480330

DOWNLOAD EBOOK

Corrosion is a huge issue for materials, mechanical, civil and petrochemical engineers. With comprehensive coverage of the principles of corrosion engineering, this book is a one-stop text and reference for students and practicing corrosion engineers. Highly illustrated, with worked examples and definitions, it covers basic corrosion principles, and more advanced information for postgraduate students and professionals. Basic principles of electrochemistry and chemical thermodynamics are incorporated to make the book accessible for students and engineers who do not have prior knowledge of this area. Each form of corrosion covered in the book has a definition, description, mechanism, examples and preventative methods. Case histories of failure are cited for each form. End of chapter questions are accompanied by an online solutions manual.* Comprehensively covers the principles of corrosion engineering, methods of corrosion protection and corrosion processes and control in selected engineering environments* Structured for corrosion science and engineering classes at senior undergraduate and graduate level, and is an ideal reference that readers will want to use in their professional work* Worked examples, extensive end of chapter exercises and accompanying online solutions and written by an expert from a key pretochemical university