Computer Navigated and Handheld Robotic Knee Arthroplasty
Computer Navigated and Handheld Robotic Knee Arthroplasty

Author: Anoop Jhurani

Publisher: Thieme

Published: 2022-09-15

Total Pages: 558

ISBN-13: 9392819706

DOWNLOAD EBOOK

Computer Navigated and Handheld Robotic Knee Arthroplasty: An Illustrative Guide is a compendium of principles and practices of using technology to improve outcomes of partial and total knee arthroplasty. The first two chapters describe the basics of computer-assisted surgery and setting up the operation theatre. Chapters 3 and 4 describe varus and valgus deformities, and their association with sagittal plane deformity. The interplay and influence of one over the other are described with the help of clinical pictures and case examples. Chapters 5 and 6 include severe sagittal plane deformity (full flexion deformity, recurvatum) and an algorithmic approach to correct both. Chapters 7 to 9 are on complex cases such as extra-articular deformity, implants in situ, etc., and describe the principles of managing these complex cases with representative examples. Chapters 10 and 11 cover partial and total knee arthroplasty with handheld robotics. This new technology helps in better assessment of soft tissue behaviour and aids in improved implantation considering individual knee kinematics. Key Features Some conventional concepts in knee arthroplasty have been questioned and new ideas presented with the help of objective data. Important concepts are highlighted in Principles, Pearls, Pitfalls, and Points to Remember sections in each chapter. Written in a lucid, point-wise format, substantiated with interesting case examples. This book will be useful to the mentor and mentee alike.

Computer Navigated and Handheld Robotic Knee Arthroplasty
Computer Navigated and Handheld Robotic Knee Arthroplasty

Author: Anoop Jhurani

Publisher:

Published: 2022-10-06

Total Pages: 0

ISBN-13: 9789390553402

DOWNLOAD EBOOK

Computer Navigated and Handheld Robotic Knee Arthroplasty: An Illustrative Guide is a compendium of principles and practices of using technology to improve outcomes of partial and total knee arthroplasty. The first two chapters describe the basics of computer-assisted surgery and setting up the operation theatre. Chapters 3 and 4 describe varus and valgus deformities, and their association with sagittal plane deformity. The interplay and influence of one over the other are described with the help of clinical pictures and case examples. Chapters 5 and 6 include severe sagittal plane deformity (full flexion deformity, recurvatum) and an algorithmic approach to correct both. Chapters 7 to 9 are on complex cases such as extra-articular deformity, implants in situ, etc., and describe the principles of managing these complex cases with representative examples. Chapters 10 and 11 cover partial and total knee arthroplasty with handheld robotics. This new technology helps in better assessment of soft tissue behaviour and aids in improved implantation considering individual knee kinematics. Key Features Some conventional concepts in knee arthroplasty have been questioned and new ideas presented with the help of objective data. Important concepts are highlighted in Principles, Pearls, Pitfalls, and Points to Remember sections in each chapter. Written in a lucid, point-wise format, substantiated with interesting case examples. This book will be useful to the mentor and mentee alike.

Total Knee Arthroplasty
Total Knee Arthroplasty

Author: James Alan Rand

Publisher: Lippincott Williams & Wilkins

Published: 1993

Total Pages: 488

ISBN-13:

DOWNLOAD EBOOK

This comprehensive reference on total knee arthroplasty describes all surgical techniques and prosthetic designs for primary and revision arthroplasty, discusses every aspect of patient selection, preoperative planning, and intraoperative and postoperative care.

Handbook of Robotic and Image-Guided Surgery
Handbook of Robotic and Image-Guided Surgery

Author: Mohammad Hossein Abedin Nasab

Publisher: Elsevier

Published: 2019-09-25

Total Pages: 753

ISBN-13: 0128142464

DOWNLOAD EBOOK

Handbook of Robotic and Image-Guided Surgery provides state-of-the-art systems and methods for robotic and computer-assisted surgeries. In this masterpiece, contributions of 169 researchers from 19 countries have been gathered to provide 38 chapters. This handbook is 744 pages, includes 659 figures and 61 videos. It also provides basic medical knowledge for engineers and basic engineering principles for surgeons. A key strength of this text is the fusion of engineering, radiology, and surgical principles into one book. - A thorough and in-depth handbook on surgical robotics and image-guided surgery which includes both fundamentals and advances in the field - A comprehensive reference on robot-assisted laparoscopic, orthopedic, and head-and-neck surgeries - Chapters are contributed by worldwide experts from both engineering and surgical backgrounds

Computer and Robotic Assisted Hip and Knee Surgery
Computer and Robotic Assisted Hip and Knee Surgery

Author: Anthony DiGioia

Publisher: Oxford University Press

Published: 2004-11-04

Total Pages: 366

ISBN-13: 9780198509431

DOWNLOAD EBOOK

The techniques of computer and robotic assisted surgery are making a major impact on the practice of orthopaedics. This book provides a complete overview of the technical and clinical aspects of computer-assisted surgery with extensive coverage of the use of robotic and navigation technologies in the surgical setting. The first part of the book presents the clinical problems and describes the basic technological components. The second part of the book describes specific applications in hip and knee reconstructive surgery.

Robotics in Knee and Hip Arthroplasty
Robotics in Knee and Hip Arthroplasty

Author: Jess H. Lonner

Publisher: Springer

Published: 2019-06-20

Total Pages: 252

ISBN-13: 3030165930

DOWNLOAD EBOOK

This state-of-the-art book focuses specifically on the current and emerging uses of robotics for knee and hip arthroplasty, with an expanding market anticipated, particularly as costs drop, data emerges and surgical efficiencies improve. It is divided into four main sections. Part one covers the background and basic principles of robotics in orthopedic surgery, discussing its history and evolution, current concepts and available technologies, perioperative protocols for recovery and pain management, economic considerations, and risks and complications. The second and third parts focus on the techniques themselves for the knee and hip respectively, including unicompartmental and bicompartmental knee arthroplasty, patellofemoral arthroplasty, and total knee and hip arthroplasty utilizing Navio, Mako, iThink, Omni and ROSA Knee robots. The final section presents the emerging use of robotics in spine surgery as well as for hospital process improvement. Presenting the most current techniques, technology and evidence, Robotics in Knee and Hip Arthroplasty will be a valuable resource for orthopedic surgeons, residents and fellows looking to implement and utilize these developing management strategies in their clinical practice.

Digital Orthopedics
Digital Orthopedics

Author: Guoxian Pei

Publisher: Springer

Published: 2019-03-14

Total Pages: 453

ISBN-13: 9402410767

DOWNLOAD EBOOK

This book addresses all aspects of digital techniques in orthopedics, from development of the core principles to imaging techniques, computer-aided design, reverse engineering and their applications. It illustrates the successful applications in accurate operation using 3-D reconstruction and applied digital techniques. All illustrations and tables were meticulously selected and are easy to understand. The book was written for all doctors and researchers who work in the fields of orthopedics, CAD/CAM and anatomy. Above all, surgeons, physiatrists, radiologists, and engineers in image processing and orthopedics will find it a valuable resource.

Arthroplasty in Hand Surgery
Arthroplasty in Hand Surgery

Author: Stephan F. Schindele

Publisher: Thieme

Published: 2021-07-28

Total Pages: 632

ISBN-13: 3132431753

DOWNLOAD EBOOK

A state-of-the-art, reader-friendly reference on hand arthroplasty from renowned global experts Recent research suggests the lifetime risk of hand arthritis may be greater than 40%. Concurrently, advances in small joint arthroplasty have greatly improved the treatment and outcomes in patients following trauma or suffering from arthritis, joint stiffness, and instability of joints in the hand and wrist. Arthroplasty in Hand Surgery: FESSH Instructional Course Book 2020 provides in-depth coverage of the surgical reconstruction or replacement of these joints. Edited by renowned hand surgeons Stephan Schindele, Grey Giddins, and Philippe Bellemère, this unique resource features contributions from an international who's who of experts. Organized in five sections and 35 chapters, the generously illustrated book encompasses the full spectrum of modern arthroplasty techniques. Section one starts with discussions of the anatomy, biomechanics, and mode of action of the finger and thumb joints and concludes with an intriguing history of hand arthroplasty. Sections two to four cover the latest arthroplasty procedures to treat impaired joints of the fingers (including proximal interphalangeal and distal interphalangeal), thumb, and wrist, respectively. The last section discusses arthroplasty of the distal radioulnar joint. This highly practical resource is ideal for the review and reference of state-of-the-art arthroplasty techniques in hand surgery and essential reading for trainees and practicing orthopaedic surgeons and hand specialists.

Computer-integrated Surgery
Computer-integrated Surgery

Author: Russell H. Taylor

Publisher: MIT Press

Published: 1996

Total Pages: 790

ISBN-13: 9780262200974

DOWNLOAD EBOOK

In Computer-Integrated Surgery leading researchers and clinical practitioners describe the exciting new partnership that is being forged between surgeons and machines such as computers and robots, enabling them to perform certain skilled tasks better than either can do alone.The 19 chapters in part I, Technology, explore the components -- registration, basic tools for surgical planning, human-machine interfaces, robotic manipulators, safety -- that are the basis of computer-integrated surgery. These chapters provide essential background material needed to get up to speed on current work as well as a ready reference for those who are already active in the field.The 39 chapters in part II, Applications, cover eight clinical areas -- neurosurgery, orthopedics, eye surgery, dentistry, minimal access surgery, ENT surgery, craniofacial surgery, and radiotherapy -- with a concluding chapter on the high-tech operating room. Each section contains a brief introduction as well as at least one "requirements and opportunities" chapter written by a leading clinician in the area under discussion.

CVRMed-MRCAS '97
CVRMed-MRCAS '97

Author: Jocelyne Troccaz

Publisher: Springer Science & Business Media

Published: 1997-03-05

Total Pages: 860

ISBN-13: 9783540627340

DOWNLOAD EBOOK

This book constitutes the refereed proceedings of the First Joint Conference; Computer Vision, Virtual Reality and Robotics in Medicine, CVRMed, and Medical Robotics and Computer-Assisted Surgery, MRCAS, held in Grenoble, France, in March 1997. The volume presents 76 regular revised papers and 16 clinical papers selected from a total of 161 submitted full papers. The volume offers highly innovative and promising research results in computer-assisted medicine and medical informatics. Among the areas covered are medical imaging, virtual reality, medical robotics, and computer-integrated therapy and surgery. The book is of relevance to clinicians, medical engineers, and computer scientists.