Composition and Temperature Effects on Aluminoborosilicate Glasses Structure and Properties

Composition and Temperature Effects on Aluminoborosilicate Glasses Structure and Properties

Author: Jingshi Wu

Publisher: Stanford University

Published: 2011

Total Pages: 174

ISBN-13:

DOWNLOAD EBOOK

This works studies the effects of compositional and temperature variations on the structure and properties of aluminoborosilicate glasses. Two groups of aluminoborosilicate glasses, one that has lower boron content and another that has higher boron content, have been studied. The structural changes were mainly observed with high-field B-11, Al-27 and Na-23 magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. In these glasses, boron is either three-coordinate (BO3) or four-coordinate (BO4); aluminum exists predominately as four-coordinate species, but there is a small amount of five-coordinate aluminum ([5]Al). The compositional study focused on the effect of the cation field strength of the network modifiers on the glass structure by varying the ratio of the two network modifiers, CaO and Na2O. Increasing the ratio of CaO to Na2O dramatically lowers the fraction of four-coordinated boron (N4), increases [5]Al, and increases the fraction of non-bridging oxygens (NBO), which was calculated based on the boron and aluminum structural information. However, variations in these fractions are not linear with respect to the average cation field strength. Na-23 spectra reveal that the ratio of bridging to non-bridging oxygens in the coordination shell of Na+ increases with an increasing ratio of CaO to Na2O in Ca-rich glasses. These changes can be understood by the tendency of higher field strength modifier cations to facilitate the concentration of negative charges on NBO in their local coordination environment, systematically converting BO4 to BO3. The effect of temperature on the structure was studied by two ways: cooling the glass-forming melts at different rates to sample the glass structure at different fictive temperature, and using high-temperature in situ NMR. The abundances of BO3 and NBO increase with increasing fictive temperature, suggesting that the reaction BO4 [logical equivalence] BO3 + NBO shifts to the right with increasing temperature. The observed temperature dependence of the abundance of BO4 species allows us to estimate the enthalpy of reaction, [Delta]H, which is closely related to the amount of NBO in the glass. In situ high-T B-11 MAS NMR was used to observe chemical exchange between BO3 and BO4 species over the timescale of microseconds to seconds. The timescale of BO3/BO4 exchange from NMR data, [lowercase Tau](NMR), appears to be "decoupled" from that of the macroscopic shear relaxation process, [lowercase Tau](s), derived from the viscosity data; however, at higher temperatures, [lowercase Tau](s) approaches [lowercase Tau](NMR). The "decoupling" at lower temperature may be related to intermediate-range compositional heterogeneities, and /or fast modifier cation diffusivities, which trigger "unsuccessful" network exchange events.


Geological Melts

Geological Melts

Author: Daniel R. Neuville

Publisher: Walter de Gruyter GmbH & Co KG

Published: 2022-07-04

Total Pages: 1108

ISBN-13: 1501510932

DOWNLOAD EBOOK

Volume 87 of Reviews in Mineralogy and Geochemistry covers fundamental aspects of the nature of silicate melts and the implications for the systems in which they participate, both technological and natural. The contents of this volume may perhaps best be summarized as structure – properties – dynamics. The volume contains syntheses of short and medium range order, structure-property relationships, and computation-based simulations of melt structure. It continues with analyses of the properties (mechanical, diffusive, thermochemical, redox, nucleation, rheological) of melts. The dynamic behavior of melts in magmatic and volcanic systems, is then treated in the context of their behavior in magma mixing, strain localization, frictional melting, magmatic fragmentation, and hot sintering. Finally, the non-magmatic, extraterrestrial and prehistoric roles of melt and glass are presented in their respective contexts.


Encyclopedia of Glass Science, Technology, History, and Culture, 2 Volume Set

Encyclopedia of Glass Science, Technology, History, and Culture, 2 Volume Set

Author: Pascal Richet

Publisher: John Wiley & Sons

Published: 2021-03-16

Total Pages: 1573

ISBN-13: 1118799429

DOWNLOAD EBOOK

A comprehensive and up-to-date encyclopedia to the fabrication, nature, properties, uses, and history of glass The Encyclopedia of Glass Science, Technology, History, and Culture has been designed to satisfy the needs and curiosity of a broad audience interested in the most varied aspects of material that is as old as the universe. As described in over 100 chapters and illustrated with 1100 figures, the practical importance of glass has increased over the ages since it was first man-made four millennia ago. The old-age glass vessels and window and stained glass now coexist with new high-tech products that include for example optical fibers, thin films, metallic, bioactive and hybrid organic-inorganic glasses, amorphous ices or all-solid-state batteries. In the form of scholarly introductions, the Encyclopedia chapters have been written by 151 noted experts working in 23 countries. They present at a consistent level and in a self-consistent manner these industrial, technological, scientific, historical and cultural aspects. Addressing the most recent fundamental advances in glass science and technology, as well as rapidly developing topics such as extra-terrestrial or biogenic glasses, this important guide: Begins with industrial glassmaking Turns to glass structure and to physical, transport and chemical properties Deals with interactions with light, inorganic glass families and organically related glasses Considers a variety of environmental and energy issues And concludes with a long section on the history of glass as a material from Prehistory to modern glass science The Encyclopedia of Glass Science, Technology, History, and Culture has been written not only for glass scientists and engineers in academia and industry, but also for material scientists as well as for art and industry historians. It represents a must-have, comprehensive guide to the myriad aspects this truly outstanding state of matter.


Fiberglass Science and Technology

Fiberglass Science and Technology

Author: Hong Li

Publisher: Springer Nature

Published: 2021-08-20

Total Pages: 555

ISBN-13: 3030722007

DOWNLOAD EBOOK

This book highlights recent developments in fiberglass research and technology development, including high-performance fiberglass chemistry; in-depth glass network structure information derived from the-state-of-the-art spectroscopic measurements, molecular dynamics simulations, and their correlations with properties; fiber surface chemistry in relation to sizing chemistry - a critical part of composite performance; fiber process stability; fundamental understanding of the batch-to-melt conversion processes and melt flow simulations; and environmental concerns such as energy efficiency and emission of volatile species, which are key to environmentally-friendly product manufacturing. The book aims to guide fiberglass researchers and manufacturers towards better awareness and, perhaps, provides potential options for global ecosystem management. More than 500 current references are included, which will enable researchers from fiber glass industry and research institution access to the most recent progress in fiberglass science and technology. Advances scientific understanding of fiberglass-forming processes, rising in popularity as a building material throughout the world; Describes the current advances in the structure and formation of fiber glass, beginning with chemistry, a wide range of characterizations, and processes, through to applications; Contains information on environmental aspects of fiberglass production, addressing energy consumption and emission.


Handbook of Properties of Textile and Technical Fibres

Handbook of Properties of Textile and Technical Fibres

Author: A. R. Bunsell

Publisher: Woodhead Publishing

Published: 2018-01-02

Total Pages: 1054

ISBN-13: 008101886X

DOWNLOAD EBOOK

Handbook of Properties of Textile and Technical Fibres, Second Edition introduces tensile properties and failure and testing of fibers, also examining tensile properties and the failure of natural fibers, such as cotton, hemp, flax, agave, wool and silk. Next, the book discusses the tensile properties and failure of synthetic fibers, ranging from polyamide, polyester, polyethylene and carbon fibers. Chapters provide a general background of the fiber, including its manufacture, microstructure, factors that affect tensile properties and methods to improve tensile failure. With its distinguished editor and international contributors, this book is an important reference for fiber scientists, textile technologists, engineers and academics. - Offers up-to-date coverage of new and advanced materials for the fiber and textile industries - Reviews structure-property relationships of high-performance natural, synthetic polymer and inorganic fibers - Offers a range of perspectives on the tensile properties of fibers from an international team of authors with diverse expertise in academic research and in textile development and manufacture


Engineered Materials Handbook, Desk Edition

Engineered Materials Handbook, Desk Edition

Author: ASM International. Handbook Committee

Publisher: ASM International

Published: 1995-11-01

Total Pages: 1313

ISBN-13: 0871702835

DOWNLOAD EBOOK

A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR


Encyclopedia of Glass Science, Technology, History, and Culture Two Volume Set

Encyclopedia of Glass Science, Technology, History, and Culture Two Volume Set

Author: Pascal Richet

Publisher: John Wiley & Sons

Published: 2021-02-05

Total Pages: 1568

ISBN-13: 1118799399

DOWNLOAD EBOOK

This Encyclopedia begins with an introduction summarizing itsscope and content. Glassmaking; Structure of Glass, GlassPhysics,Transport Properties, Chemistry of Glass, Glass and Light,Inorganic Glass Families, Organic Glasses, Glass and theEnvironment, Historical and Economical Aspect of Glassmaking,History of Glass, Glass and Art, and outlinepossible newdevelopments and uses as presented by the best known people in thefield (C.A. Angell, for example). Sections and chapters arearranged in a logical order to ensure overall consistency and avoiduseless repetitions. All sections are introduced by a briefintroduction and attractive illustration. Newly investigatedtopics will be addresses, with the goal of ensuring that thisEncyclopedia remains a reference work for years to come.


Bibliography on Fibers and Composite Materials--1969-1972

Bibliography on Fibers and Composite Materials--1969-1972

Author: J. N. Fleck

Publisher:

Published: 1972

Total Pages: 108

ISBN-13:

DOWNLOAD EBOOK

The bibliography contains over 3000 references, including translated items from Japan, West Germany, U.S.S.R., and other countries as well as references of original English language publications of the United States and United Kingdom. The references are categorized by specific fiber and matrix materials. In addition, many references are grouped in the general categories of compatibility studies, theory and design, testing and evaluation, application, and fabrication. A group of references to general review articles is included. The references represent the holdings of the former Defense Ceramic Information Center (DCIC) plus those of the Fibers and Composites Center (FCIC) at Battelle's Columbus Laboratories and MCIC. (Author).