The Commercial Pilot—Airplane Practical Test Standards (PTS) book has been published by the Federal Aviation Administration (FAA) to establish the standards for commercial pilot certification practical tests for the airplane category, single-engine land and sea; and multiengine land and sea classes. FAA inspectors and designated pilot examiners shall conduct practical tests in compliance with these standards. Flight instructors and applicants should find these standards helpful during training and when preparing for the practical test.
The Federal Aviation Administration (FAA) has published the Private Pilot - Airplane Airman Certification Standards (ACS) document to communicate the aeronautical knowledge, risk management, and flight proficiency standards for the private pilot certification in the airplane category, single-engine land and sea; and multiengine land and sea classes. This ACS incorporates and supersedes the previous Private Pilot Practical Test Standards for Airplane, FAA-S-8081-14. The FAA views the ACS as the foundation of its transition to a more integrated and systematic approach to airman certification. The ACS is part of the safety management system (SMS) framework that the FAA uses to mitigate risks associated with airman certification training and testing. Specifically, the ACS, associated guidance, and test question components of the airman certification system are constructed around the four functional components of an SMS: Safety Policy that defines and describes aeronautical knowledge, flight proficiency, and risk management as integrated components of the airman certification system; Safety Risk Management processes through which internal and external stakeholders identify and evaluate regulatory changes, safety recommendations and other factors that require modification of airman testing and training materials; Safety Assurance processes to ensure the prompt and appropriate incorporation of changes arising from new regulations and safety recommendations; and Safety Promotion in the form of ongoing engagement with both external stakeholders (e.g., the aviation training industry) and FAA policy divisions. The FAA has developed this ACS and its associated guidance in collaboration with a diverse group of aviation training experts. The goal is to drive a systematic approach to all components of the airman certification system, including knowledge test question development and conduct of the practical test. The FAA acknowledges and appreciates the many hours that these aviation experts have contributed toward this goal. This level of collaboration, a hallmark of a robust safety culture, strengthens and enhances aviation safety at every level of the airman certification system.
EFFECTIVE JUNE 28, 2019 The Federal Aviation Administration (FAA) has published the Commercial Pilot - Airplane Airman Certification Standards (ACS) document to communicate the aeronautical knowledge, risk management, and flight proficiency standards for the commercial pilot certification in the airplane category, single-engine land and sea; and multiengine land and sea classes. This ACS incorporates and supersedes FAA-S-ACS-7, Commercial Pilot - Airplane Airman Certification Standards.
EFFECTIVE JUNE 28, 2019 The Federal Aviation Administration (FAA) has published the Commercial Pilot - Airplane Airman Certification Standards (ACS) document to communicate the aeronautical knowledge, risk management, and flight proficiency standards for the commercial pilot certification in the airplane category, single-engine land and sea; and multiengine land and sea classes. This ACS incorporates and supersedes FAA-S-ACS-7, Commercial Pilot - Airplane Airman Certification Standards.
This is an excellent training manual for any student preparing for his or her Commercial Pilot Single Engine Land Certificate. Flight Instructors applicants will also find this manual helpful in preparing lesson plans and researching how to conduct maneuvers. Certified Instructors can use this teaching aid as an excellent resource for pre-flight briefings.
This is the fifth edition of a book pilots have been relying on to learn multi-engine flying for more than 20 years. Learn fundamentals of flying multi-engine airplanes and the aerodynamic laws that govern multi-engine flight, including energy management, under Bob Gardner's experienced and energetic tutoring. Included is information on both obtaining the multi-engine rating and checking out in a new twin. An integrated flight and ground syllabus details the program for the rating and provides a sample written test, typical of the one used for new-aircraft checkouts. Also contains a complete library of FAA source material on multi-engine flight subjects. The Complete Pilot Series is designed for use in flight schools, for home study, and as a base for student kits.
The Airman Certification Standard (ACS) is the guide for aviation students, instructors, and FAA-designated examiners to know what pilot and industry license applicants must know, do, and consider for their FAA Knowledge Exam and practical (checkride), in order to earn a certificate or rating. This is the revised edition (FAA-S-ACS-7A) of the new ACS (effective June 11, 2018). The ACS replaced (and is replacing in an ongoing basis for all licenses) the previous FAA Practical Test Standards (PTS) and it is basically an enhanced version of the PTS. It adds task-specific knowledge and risk management elements to each PTS "Area of Operation" and "Task." The result is a presentation that integrates the standards for passing both the FAA Knowledge Exams and the FAA Oral and Practical Exams in a way that coordinates the study and learning for both, making them relevant to each other. This Federal Aviation Administration (FAA) Commercial Pilot - Airplane ACS provides the aeronautical knowledge, risk management, and flight proficiency standards for private pilot certification in the airplane category, single-engine land and sea, as well as multi-engine land and sea classes (ASEL, ASES, AMEL, AMES). This ACS incorporates and supersedes the previous Practical Test Standards (FAA-S-8081-12) for Commercial Pilot - Airplane license applicants, and the previous ACS edition FAA-S-ACS-7.
